First, I better get an introductory disclaimer out of the way. I will be mentioning some different items and companies in this article. I am not associated with any of these companies, and do not receive any endorsements from these companies. These are simply products that I have found to work for me over the years. Now, we can get on to the main event.
About 10 years ago, a friend of mine got me interested in antique firearms. I’ve owned a few different ones over the years. Even JWR has started Elk Creek Company, to deal exclusively in pre-1899 antique firearms.
Now, the one thing that I’ve noticed over the years is that many antique firearms have survived in relatively good condition, but the same can’t be said for the holsters that used to carry them. Rarely have I ever seen an antique handgun for sale with its original holster, or any holster for that matter. An antique handgun can be a wonder just to hold, and feel the history contained within it, But if you actually want to carry it and use it, then you’ll need a holster. But where do you get a holster for a gun that’s 120 years old, or older?
Unless you have a DeLorean to go back in time, your choices are pretty limited as there are no manufacturers out there producing holsters for these firearms.
- You can purchase one of the many nylon mass-produced holsters on the market. Up here we see Uncle Mikes’s most often. These are a good quality, relatively inexpensive way to get a holster for an antique. The downside of this is that they are produced to fit a wide variety of firearms, and are custom only in the fact that they vary by frame size and barrel length of the firearm. They will fit, but not necessarily well, and may not have the options that you want or like.
- You could contact one of the many makers of custom Kydex. Being as the equipment to form Kydex is both readily available, and inexpensive, many “hobbyists” have this set up as a secondary source of income. A form-fitted Kydex holster for an antique would serve you very well for a carry option. If you are ordering one, the chances are that you can request the features that you want, and they are comparatively inexpensive. Personally, I just don’t care for the look of Kydex with an antique.
- You could order a custom leather holster from one of the many professional, or hobby makers out there. A quick web search will probably find somebody relatively close to you offering this service. They can also usually be found with a visit to a gun show. This will definitely allow you to order exactly what you want, and pretty much guarantee that you will receive the exact holster that you want. The downside of this is, of course, that this may take some time and be expensive.
- Build it yourself! That’s what I have chosen to do over the years, and I will try and walk you through the basic steps, and pitfalls, to be able to do this for yourself. The results can be both practical, and highly satisfying.
First, let me say that I am not a professional leather-worker, or even a hobbyist, for that matter. I started doing leatherwork when I was much younger, making new knife sheaths for knives that had either worn out, or lost their sheaths somehow. It was a good chance to learn what I did, and did not want in a knife sheath. I had made a couple holsters over the years, when I couldn’t find what I wanted, or couldn’t afford it. It was a matter of trial and error, often with a lot more errors than successes. Hopefully I can give a few pointers to help you avoid some of my mistakes.Continue reading“Packing Antique Iron – Part 1, by The Lone Canadian”
