I really enjoy writing memes!
Here is my latest meme:
To share this, you can find it here: https://kapwi.ng/c/aGZjKo0F
Meme Text:
Note to Joe Biden…
On January 20, 2021:
Beware of Kamala’s Nose Under The Tent
I really enjoy writing memes!
Here is my latest meme:
To share this, you can find it here: https://kapwi.ng/c/aGZjKo0F
Meme Text:
Note to Joe Biden…
On January 20, 2021:
Beware of Kamala’s Nose Under The Tent
“If ye then be risen with Christ, seek those things which are above, where Christ sitteth on the right hand of God.
Set your affection on things above, not on things on the earth.
For ye are dead, and your life is hid with Christ in God.
When Christ, who is our life, shall appear, then shall ye also appear with him in glory.
Mortify therefore your members which are upon the earth; fornication, uncleanness, inordinate affection, evil concupiscence, and covetousness, which is idolatry:
For which things’ sake the wrath of God cometh on the children of disobedience:
In the which ye also walked some time, when ye lived in them.
But now ye also put off all these; anger, wrath, malice, blasphemy, filthy communication out of your mouth.
Lie not one to another, seeing that ye have put off the old man with his deeds;
And have put on the new man, which is renewed in knowledge after the image of him that created him” – Colossians 3:1-10 (KJV)
I just heard about the Supreme Court’s December 11th rejection of the Texas v. Pennsylvania et al case. That was very discouraging. If they weren’t willing to step in to correct an obviously corrupted vote-counting process, then I don’t hold out too much hope for the survival of our Republic. The Democrats have demonstrated that they can now rig elections at will. So what are the chances of ever having another Republican president? And what chance is there of holding on to a Republican majority in the U.S. Senate? Be prepared to have your gun rights trampled, your nation’s borders flung open, your freedoms of speech and religion truncated, your tax burden increased, and the entire socialist-globalist agenda rammed down your throat.
Plan accordingly. I recommend that you buy some unpapered guns NOW, while you still can. It is very likely that the Democrats are going to insist on a ban on private party sales within the first few months of the new presidential administration. They euphemistically call this “universal background checks.” And if you live a “Blue” state, then make plans to move, muy pronto. The clock is ticking. Oh, and pray hard.
—
On December 12, 2000, the U.S. Supreme Court released its decision in Bush v. Gore, settling the recount dispute in Florida’s 2000 presidential election in George W. Bush‘s favor and thus handing him the presidency. Apparently, the court has changed in the intervening 20 years.
—
Today we present another entry for Round 92 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:
Round 92 ends on January 31, so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how-to” skills for survival have an advantage in the judging.
(Continued from Part 1. This concludes the article.)
—
What is the actual material you are printing with? Filament. It comes in a roll, usually 1 kg, and is 1.75mm thick. It is what is extruded out of the nozzle onto the print bed and makes your object. Filament comes in many different materials.
The most common and inexpensive filament is poly lactic acid (PLA). Better yet is PLA+. Both of these are made from corn as a feedstock, and do not use petroleum as an input. So if supporting corn growers of America as opposed to oil companies is something that resonates with you, so much the better.
Of note, PLA is easy to work with on a printer, does not give off dangerous fumes when heated, and can actually be composted as a waste product, if done so in an industrial composting type facility (needs the high heat to break down). As a downside, it does degrade over time in direct sun, and can deform in high heat. Don’t go shooting a PLA printed firearm full auto, or leave it on the dash in your car in the summer with the windows up, as it may warp. PLA also comes from a variety of manufacturers with other materials incorporated, such as wood, ceramic, copper, glow-in-the-dark materials, and more. These other materials can contribute useful or aesthetic characteristics depending on what you are printing. There are also magnetic iron PLA filaments, and electrically-conductive PLA filaments. Nearly all of the firearm components I refer to have been developed and tested with PLA or PLA+, and those that are not will be noted in the print instructions when you download the file.
Other materials commonly used to print are ABS, which you may be familiar with as a type of plastic used in pipes, and PET, a food safe type of plastic that is recyclable. Others include TPE (flexible and bendy), carbon fiber (light and stiff) and nylon (super strong but not as easy to work with as it requires high temps to print properly. And the list goes on, depending on your application there is likely a filament material best suited to it. All my prints so far have been with PLA+, as it is easy and inexpensive (about $20/kg) and comes in a variety of colors and is most forgiving to work with.
How do I tell the machine what to print? With a file. Specifically, you need an stl format file. You can find stl files that other people have created at web sites like Thingiverse.com and Yeggi.com. There you can search by category or key word(s) and find a whole galaxy of things you can print, and download the stl files that someone else took the time to create. Often there are pictures of the final products, and instructions on how to print the best results (parameters like temperature, nozzle speed, in-fill density, etc). Many of these files are free and open-source, and many can be customized before you download them to adjust size, shape, and angles. Some of them have a cost, a price you pay to the developer who created the object file for their effort, usually just a few dollars.Continue reading“3D-Printed Freedom – Part 2, by A.M.”
To be prepared for a crisis, every Prepper must establish goals and make long-term and short-term plans. In this column, the SurvivalBlog editors review their week’s prep activities and planned prep activities for the coming week. These range from healthcare and gear purchases to gardening, ranch improvements, bug out bag fine-tuning, and food storage. This is something akin to our Retreat Owner Profiles, but written incrementally and in detail, throughout the year. Note that as an Amazon Associate I earn from qualifying purchases. We always welcome you to share your own successes and wisdom in the Comments. Let’s keep busy and be ready!
I’ve had a very quiet week. I’m presently out of state, helping an elderly relative, and gathering inventory for Elk Creek Company. I won’t be taking any new orders until December 26th, and those won’t begin to be mailed until January 3rd. I’ve been averaging 12 miles a day, getting exercise on my bicycle. On Friday, I logged a 20-mile ride.
I’m presently trying to get as much blog writing and editing done, as possible. I’m hoping to get the special 15th Blogiversary (2005-2020) Archive USB stick produced and orderable a little earlier, this year. Look for the ad for that USB stick by the third week of January, 2021.
By the way, if you want to buy one. then be sure to order it before the second week of February. The previous editions have sold out very quickly.
Now, over to Lily…
“After Alexander son of Philip, the Macedonian, who came from the land of Kittim, had defeated Darius, king of the Persians and the Medes, he succeeded him as king. (He had previously become king of Greece.)
[2] He fought many battles, conquered strongholds, and put to death the kings of the earth.
[3] He advanced to the ends of the earth, and plundered many nations. When the earth became quiet before him, he was exalted, and his heart was lifted up.
[4] He gathered a very strong army and ruled over countries, nations, and princes, and they became tributary to him.
[5]
After this he fell sick and perceived that he was dying.
[6] So he summoned his most honored officers, who had been brought up with him from youth, and divided his kingdom among them while he was still alive.
[7] And after Alexander had reigned twelve years, he died.
[8]
Then his officers began to rule, each in his own place.
[9] They all put on crowns after his death, and so did their sons after them for many years; and they caused many evils on the earth.
[10]
From them came forth a sinful root, Antiochus Epiphanes, son of Antiochus the king; he had been a hostage in Rome. He began to reign in the one hundred and thirty-seventh year of the kingdom of the Greeks.
[11]
In those days lawless men came forth from Israel, and misled many, saying, “Let us go and make a covenant with the Gentiles round about us, for since we separated from them many evils have come upon us.”
[12] This proposal pleased them,
[13] and some of the people eagerly went to the king. He authorized them to observe the ordinances of the Gentiles.
[14] So they built a gymnasium in Jerusalem, according to Gentile custom,
[15] and removed the marks of circumcision, and abandoned the holy covenant. They joined with the Gentiles and sold themselves to do evil.
[16]
When Antiochus saw that his kingdom was established, he determined to become king of the land of Egypt, that he might reign over both kingdoms.
[17] So he invaded Egypt with a strong force, with chariots and elephants and cavalry and with a large fleet.
[18] He engaged Ptolemy king of Egypt in battle, and Ptolemy turned and fled before him, and many were wounded and fell.
[19] And they captured the fortified cities in the land of Egypt, and he plundered the land of Egypt.
[20]
After subduing Egypt, Antiochus returned in the one hundred and forty-third year. He went up against Israel and came to Jerusalem with a strong force.
[21] He arrogantly entered the sanctuary and took the golden altar, the lampstand for the light, and all its utensils.
[22] He took also the table for the bread of the Presence, the cups for drink offerings, the bowls, the golden censers, the curtain, the crowns, and the gold decoration on the front of the temple; he stripped it all off.
[23] He took the silver and the gold, and the costly vessels; he took also the hidden treasures which he found.
[24] Taking them all, he departed to his own land. He committed deeds of murder,
and spoke with great arrogance.
[25] Israel mourned deeply in every community,
[26] rulers and elders groaned,
maidens and young men became faint,
the beauty of women faded.
[27] Every bridegroom took up the lament;
she who sat in the bridal chamber was mourning.
[28] Even the land shook for its inhabitants,
and all the house of Jacob was clothed with shame.
[29]
Two years later the king sent to the cities of Judah a chief collector of tribute, and he came to Jerusalem with a large force.
[30] Deceitfully he spoke peaceable words to them, and they believed him; but he suddenly fell upon the city, dealt it a severe blow, and destroyed many people of Israel.
[31] He plundered the city, burned it with fire, and tore down its houses and its surrounding walls.
[32] And they took captive the women and children, and seized the cattle.
[33] Then they fortified the city of David with a great strong wall and strong towers, and it became their citadel.
[34] And they stationed there a sinful people, lawless men. These strengthened their position;
[35] they stored up arms and food, and collecting the spoils of Jerusalem they stored them there, and became a great snare.
[36] It became an ambush against the sanctuary,
an evil adversary of Israel continually.
[37] On every side of the sanctuary they shed innocent blood;
they even defiled the sanctuary.
[38] Because of them the residents of Jerusalem fled;
she became a dwelling of strangers;
she became strange to her offspring,
and her children forsook her.
[39] Her sanctuary became desolate as a desert;
her feasts were turned into mourning,
her sabbaths into a reproach,
her honor into contempt.
[40] Her dishonor now grew as great as her glory;
her exaltation was turned into mourning.
[41]
Then the king wrote to his whole kingdom that all should be one people,
[42] and that each should give up his customs.
[43] All the Gentiles accepted the command of the king. Many even from Israel gladly adopted his religion; they sacrificed to idols and profaned the sabbath.
[44] And the king sent letters by messengers to Jerusalem and the cities of Judah; he directed them to follow customs strange to the land,
[45] to forbid burnt offerings and sacrifices and drink offerings in the sanctuary, to profane sabbaths and feasts,
[46] to defile the sanctuary and the priests,
[47] to build altars and sacred precincts and shrines for idols, to sacrifice swine and unclean animals,
[48] and to leave their sons uncircumcised. They were to make themselves abominable by everything unclean and profane,
[49] so that they should forget the law and change all the ordinances.
[50] “And whoever does not obey the command of the king shall die.”
[51]
In such words he wrote to his whole kingdom. And he appointed inspectors over all the people and commanded the cities of Judah to offer sacrifice, city by city.
[52] Many of the people, every one who forsook the law, joined them, and they did evil in the land;
[53] they drove Israel into hiding in every place of refuge they had.
[54]
Now on the fifteenth day of Chislev, in the one hundred and forty-fifth year, they erected a desolating sacrilege upon the altar of burnt offering. They also built altars in the surrounding cities of Judah,
[55] and burned incense at the doors of the houses and in the streets.
[56] The books of the law which they found they tore to pieces and burned with fire.
[57] Where the book of the covenant was found in the possession of any one, or if any one adhered to the law, the decree of the king condemned him to death.
[58] They kept using violence against Israel, against those found month after month in the cities.
[59] And on the twenty-fifth day of the month they offered sacrifice on the altar which was upon the altar of burnt offering.
[60] According to the decree, they put to death the women who had their children circumcised,
[61] and their families and those who circumcised them; and they hung the infants from their mothers’ necks.
[62]
But many in Israel stood firm and were resolved in their hearts not to eat unclean food.
[63] They chose to die rather than to be defiled by food or to profane the holy covenant; and they did die.
[64] And very great wrath came upon Israel” – 1 Maccabees 1 (Apocryphal)
Happy birthday to actress Teri Garr (born 1944.) She was unforgettable for her role in Young Frankenstein.
—
Today we present another entry for Round 92 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:
Round 92 ends on January 31, so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how-to” skills for survival have an advantage in the judging.
Editor’s Introductory Proviso: The following article is intended for educational purposes only. It is not legal advice. State and local laws vary widely, so be sure to consult them before you buy, print, or build!
—
“The class which has the means of material production at its disposal, has control at the same time over the means of mental production, so that thereby, generally speaking, the ideas of those who lack the means of mental production are subject to it.” – Karl Marx
Now don’t get me wrong, I’m not a Marxist, I just love the confused look that I get from my more “progressive” friends when I quote a little Marx at ’em, as they know I tend toward the libertarian perspective, but at least when it comes to the means of production, perhaps we can find some common ground. To wit, 3D Printing!
I admit, my concept of 3D printing was pretty hazy up until about a year ago, when a friend introduced me. I had imagined it to be strictly the province of movies and high tech prototyping labs and industry. I was wrong. At the consumer level, the price and quality of 3D printers has evolved to a level where even a cheapskate Luddite like me can afford a printer and, just as important, is capable of harnessing and possessing the means of production for less than $300 ready to go. This article is meant to give you the same introduction I benefited from, and the background and resources to investigate further whether this capability is something you can benefit from (of course it is!)
Production of what you may ask? Darn near anything you can imagine! During these days of pandemic and the associated disruption to supply chains, the ability to get desperately needed items from factories across the country and across the world has been demonstrated as fragile indeed. Hospitals and companies have turned to 3D printers to produce their needed components for ventilator circuit connectors, lab testing materials, PPE, and more.
On the individual level, I have for example printed sheaves for an old pulley system that would have cost $50-60 dollars to have bought from a scrap dealer online and shipped to me, when perhaps 25 cents worth of filament and an hour or so on the printer gave me a functional replacement sheave and several spares as well. In order to build an enclosure for the netting my wife puts around the strawberries to keep birds out, I printed a series of connector brackets that hold half-inch conduit piping together at the joints. To demonstrate ratios of mass to surface area my kid’s printed gliders they can launch with rubber bands and measure their flight times. Do you need a bracket of particular size and shape to hold something in an odd spot, temporarily or permanently? Print the bracket to your own spec!
Back during the face mask shortage this spring, I was able to print face masks that could be screwed in series to allow various levels of filtration. I had long ago lost the drain plug for an old Igloo brand cooler…I had been sticking cotton balls wrapped in plastic cling wrap into the drain hole to try and prevent leakage and delay melting, but it was always a poor substitute. 10 cents of plastic and an hour on the printer, and I have a drain plug that works as well as brand new. Battery boxes, socket wrench organizers, hose thread adapters, and one of my wife’s favorites, a coupler that allows us to refill small, travel-sized toothpaste tubes from larger (more economical) toothpaste tubes. These are but the barest fraction of useful objects you can produce in your home…but the real excitement is yet to come.
Perhaps global supply chains stay disrupted…or maybe they don’t…could some equal or worse disruption ever occur again? Readers of this blog already know and are preparing for the possible ramifications of such events. But perhaps it isn’t supply chains that cause a future shortage of needful things…perhaps it is legislation. You see, beyond garden brackets and toothpaste couplers, there is much more that can be produced, and that much more includes things like 33-round Glock 9mm magazines. It includes things like pistol stabilizing braces. It even includes things like lower receivers for AR-pattern rifles and Glock or Smith & Wesson-type pistols. And much, much more.Continue reading“3D-Printed Freedom – Part 1, by A.M.”
Here are the latest news items and commentary on current economics news, market trends, stocks, investing opportunities, and the precious metals markets. We also cover hedges, derivatives, and obscura. Most of these items are from the “tangibles heavy” contrarian perspective of SurvivalBlog’s Founder and Senior Editor, JWR. Today, we look at rising lumber prices. (See the Tangibles Investing section.)
Interview with Phil Streible: All-in gold doesn’t make sense; silver, oil are the real winners
o o o
Frank Holmes: The Debate Between Gold And Bitcoin Intensifies
Biden names liberal econ team as pandemic threatens workers
o o o
At Zero Hedge: Feds Admit $2.3 Trillion In Improper Payments. A little snippet:
“Dead people: $871.9 million in mistaken payments were made to dead people. Medicaid, social security payments, federal retirement annuity payouts (pensions), and even farm subsidies were sent to dead recipients. Root cause: failure to verify death. Four-year total: $2.8 billion
Ancient Americans: Six million Social Security numbers are active for people aged 112+; however, only 40 people in the world are known to be older than 112 years of age.”
o o o
The Pandemic Public-Debt Dilemma
o o o
At Wolf Street: US Air Passenger Traffic Skids Again, Delta & American Warn of Declining Bookings
o o o
“Economic planning is nothing more than the forcible superseding of other people’s plans by the powerful elite backed up by the brute force of government.” – The Late Dr. Walter E. Williams
This evening marks the first day of Hanukkah. I wish all our readers a joyous Hanukkah season!
—
On this day in 1942, my great uncle Lt. Robert I. Kinsella was killed when his B-24 bomber (part of the 90th Bombardment Group, Heavy, 320th Bomber Squadron), flying from the Iron Range Airfield in Northern Queensland, Australia went down in the South Pacific.
—
And on December 10, 1520, Martin Luther publicly burned the papal edict demanding that he recant or face excommunication.
Choosing a handgun is a very personal decision, and I hope that this article will provide information that will help make that decision easier. I want to start by saying that I have been an NRA Certified Firearms Instructor for the last 20 years as well as a part-time law enforcement officer. I have been carrying concealed for close to 30 years, almost all of it with a Glock 19. I have taught more than 2,500 students the course needed in Michigan to obtain a Concealed Pistol License.
Since June 2020, the demand for my concealed carry class has been about 500% of a normal year. The election, pandemic, riots, and a general unease about the future is causing many people to want to purchase and carry a firearm. The majority of these people are females and first-time gun buyers. I urge all my students to put off buying their first gun until after they take the class, because I give them the option of shooting several of my favorite concealed-carry handguns after they complete the formal course of fire. The ones that do buy a gun before the class usually leave saying they wished they would have waited.
I have no association with any product companies that I talk about and purchased all of the guns at retail from a local FFL dealer.
Here are my minimum specifications for a personal protection handgun:
1.) It must have at least a 10-round capacity. This eliminates all revolvers and nearly all of the smaller caliber handguns. The single biggest problem that I see in all my classes is students trying to shoot too small of a gun. I do realize that this is a subjective minimum and that the average defensive shooting is only about three rounds. But I don’t want to plan on average, and 10 rounds or more just makes sense to me.
2.) It must be at least 9mm Parabellum caliber. I personally like the 9mm, as I believe it has the best overall blend of power, capacity, and efficiency. Also, when I attend advanced-level instructor training classes, the vast majority of those instructors carry a 9mm. In police work we would call that “a clue”. The second biggest problem that I see in classes is students shooting a gun with more recoil than they can safely control. This is why many law enforcement agencies have gotten away from the .40 S&W to go back to the 9mm.
3.) It must not have an external safety. I can’t even begin to tell you how many people I see at the range trying to shoot a gun that has the safety on – and that’s in a relatively stress-free environment of a shooting range. Also, external safeties have little pins and springs that can break and malfunction.
4.) It must be able to pass my minimum shooting drill – 5 shots from concealment on an 8” paper plate at 5 yards in less than 3 seconds. Here again, this may be somewhat subjective, but after watching literally thousands of real shootings on video, what I learned was that the “winner” was usually the first person to score an anatomically significant shot on the opponent. By the way, the vast majority of concealed-carry citizens today cannot pass this drill.
5.) I must be able to get my whole hand on the grip – no dangling pinky fingers.
6.) It must exhibit near 100% reliability with common range and self-defense ammunition. My minimum requirement is 200 rounds of range ammo and 50 rounds of my chosen carry ammo without any failures.
7.) It must be easy to conceal by the average shooter.Continue reading“Top Concealed-Carry Handguns, by Deputy Dave”
SurvivalBlog presents another edition of The Survivalist’s Odds ‘n Sods— a collection of news bits and pieces that are relevant to the modern survivalist and prepper from “JWR”. Our goal is to educate our readers, to help them to recognize emerging threats, and to be better prepared for both disasters and negative societal trends. You can’t mitigate a risk if you haven’t first identified a risk. Today, some advice on storing clarified butter.
Peter sent this from The Wall Street Journal: Homeland Security Watchdog to Probe Department’s Use of Phone Location Data
Our friend and fellow blogger Patrice Lewis recently penned this great essay: Here’s my game plan for the ‘Great (Dystopian) Reset’
Reader T.R,. wrote to mention:
“Butter is a commodity that many of us consider essential. It has a long shelf life but as I have recently discovered how easy it is to clarify butter, you can make it last even much longer. The first several times I made clarified butter, also called ghee, I made it in the Instant Pot, a digital programmable multi-function pressure cooker; which is a very good appliance, but not the best for clarifying butter. Why do you want to do this? 1St, it improves the flavor, 2nd, it improves the shelf life. Let’s get started; what do you need? One pound of butter, salted or unsalted, a thermometer, and a saucepan and duh, a stove.
Set a very low heat for the saucepan with the butter in it until it melts. Turn up the heat until it just sneaks above 212F. It will appear to boil and eventually stop. The bottom of the pan will turn brown, stir it up for the sake of the pan. Let it boil until it comes to rest, which means the water has been removed. About that time, usually about 20 minutes turn off the heat and pour the liquid through a sieve to strain out the crumbly milk solids. One pound of butter will fill one pint jar. You can leave it on the shelf and use as is or put it in the refrigerator, but if you keep it in the refrigerator it will need to be set one the shelf overnight before it will be usable as it will be as hard as cheese.
Once you’ve done that several times you might want to experiment. Try heating up enough olive oil to saute garlic before you add the butter. As the butter melts add spices, such as oregano, thyme, caraway seeds and maybe cayenne. Suit yourself. You can also add more olive oil after it has been strained to make it softer. You can keep this on the shelf for a long time, but if green mold develops it means you did not cook out all the water, but all you have to do is to reheat it and keep it in the refrigerator.”Continue reading“The Survivalist’s Odds ‘n Sods”
“The miracle, of course, was not that the oil for the sacred light—in a little cruse—lasted as long as they say; but that the courage of the Maccabees lasted to this day: let that nourish my flickering spirit.” – Charles Reznikoff
December 9th, 1914 was the birthday of Maximo Guillermo “Max” Manus. He was one of the few Norwegians who put his life on the line, fighting the Nazi occupiers. (There surely would have been more active resistance fighters, but fearing widespread reprisal executions by the Germans, King H7 asked the civilian populace to stand down.) Max Manus passed away in 1996. I would have liked to have met him. His exploits are fairly accurately shown in the movie Max Manus: Man of War.
—