Five Acres and Independence- Part 1, by D.C.

How You Can Do It- Getting Started

Many of us find the prospects of individualism and self determination, on a level of becoming a self-sustaining individual or family or even maybe tribe or community, simply daunting. It is germane to contend in this day and age, some aspects of this are difficult to fully appreciate, where they are so foreign from daily life to be almost inscrutable outliers.

Just where to begin can be an overwhelming situation. Don’t feel alone. There are a myriad of ways to begin, indeed, and the simplest answer is it all begins with each of us. Remember well, individualism and self-determination does not mean to be alone. It must be noted, also, this is liberty. It is provincial and very much agrarian, too. So, in effect, to be self-determining is to be free. At the very least, it is the beginnings and root of choosing, and a most very important choice is here– freedom. Because after all, the first step is a matter of winning your own heart and mind to make that choice.

Okay. Probably what you’re thinking, and you’re right, you are alone; however, you are alone because you haven’t grasped something. You’re not alone in regards to like-minded folks. Sure, there are no easy answers, but action is what counts. You have to start some place, friend. The sooner you begin to defy the matrix and implement alternatives, the sooner you will be creating freedom.

It is in joining “the Honorable Resistance”, a great and noble thing, with humble beginnings, as where the most noble of things begin.

It is very difficult to take even one step out of the system. I, too, had to begin someplace. It was when I did take action that the best aspect of resistance, which I had no idea about, happened.

Take me seriously on this. I’m going to tell you a secret. It is not action, the act, that counts so much, though its value is critical. It is the change in who you are– your dignity and self-determination– that is the transformation. It is winning your own heart and mind. After that, lot of things are easy, because you have changed your thinking. That is where it starts. Then, it is action, the act, that matters, because you have created a zeitgeist, an individual paradigm. And that is where all good things begin.

I imagine some of you are saying to yourself, “Ya’, right. Who is this clown?” Well, this clown is a guy probably not much different than you. However, this clown knows something that is a real paradigm. It begins with me, with you, and with each of us, and once it does, it is not just me, or just you. We become a plurality of freedom. It is motive power and audacity that we are talking about. Maybe it is small potatoes, but the greatest things sometimes begin small, out of all stature to their enormity. And that is the only thing that has ever changed the world for good. It has always been the purview of the dirt people and no one else who changes the world for the better. It takes one person at a time. There is so much motive power in that simple thing that it becomes indomitable, and so can you.

Ask yourself how is it working for you, personally on your level, in relative terms to you. Then ask yourself the following:

  • What am I doing?,
  • Am I a debt slave, a fiat cash cow, or a serf of the industrialized corporate tyranny?
  • ARE there possibilities I can effect that bear fruit?

Be honest, dead nuts frank on this. Don’t lie to yourself.

I know the answer, but do you? Many things are contingent upon your forthright answer to yourself.

Then, ask yourself, seriously, as a heart attack, what is the object, the point, of the trap you’re in? The box that has no escape hatch? The catch-22 you find difficult to extricate yourself from?

Remember, the key is it all begins with each of us.

Maybe, it is scary or even terrifying, but really what are you going to loose walking away from it all? It is a real question, my friend. It is the question. It is the hump you have to mentally climb over.

How We Did It With Humble Beginnings

This is how we did it and got here. Everyone is different, but here I’m offering a touchstone, a reference point. It is first hand experience. I hope you can take it to the bank called Liberty, because we made it work, and we did it with humble means and beginnings.

We– my wife and I– decided it was time we chose. We needed to make the choice to become self-sufficient and self-determined in every facet of our lives as was practically possible with the resources we possessed, and realistically would be able to acquire in the future a life based on our hopes and wishes of personal philosophy, morals, principles, and abilities.

Rid Ourselves of Debt

The first order of business was to rid ourselves of all financial debts. Debt to us was an anchor, a ball and chain. So, we worked like dogs for a year and a half, sold everything we had except for the basics, like guns and gear, tools, bare essential clothes, basic cookware, books, and treasured artifacts. We sold every piece of furniture, bicycles, the lawn mower, and we gave up every electronic except one computer and a cell phone– a pay-as-you-go phone. We also sold every vehicle but an 89 Chevy 3/4 ton pickup. We stripped ourselves to the basics and I mean to the bone.

Buy Property for Cash

After selling our houses, cashing out our 401K’s and investments, and with the little bit of added cash we saved from working extra jobs and overtime in one year, we had $54,000 cash left over. I mean, we put our minds to it and kept the simple goals in sight. We put everything in one large storage unit, went to the bank, got a special bank check for $52,000 plus $2000 in cash, jumped in the old pickup, drove down to West Virginia, and got a $30 a night motel room. We ate out of a cooler and a cardboard box of food. With our laptop, phone, and newspapers, we started searching. We figured after our expenses of hunting for property and moving expenses, leaving us a couple of grand for living expenses, we could alot $46,500 to buy a piece of property outright for cash. Our baseline requirements were: five acres, a livable house, and if possible a garage-type structure for a workshop. Every house we looked at that fit our needs, no matter the asking price, we said real nice like that we had $46, 500 cash, right now, today, and that we will buy this place if they’d show us a clear title, no offense intended, but it is what we have to spend, and we are not getting a bank loan. We told them to think about it and leave a message at the motel for us because we are heading over to such and such to look at another spread. Well, in two days, we owned a place four heirs had jointly inherited, originally listed at $120,000 on six acres with a two-car garage, creek, and taxes of only $275 a year. The total cost for the paperwork, county fees, taxes, et cetera was $378 to do the sale. We found we had ten grand in standing timber, which we sold later, and recouped enough cash to buy many of the components to build an off-grid solar/wind system with a brand new heavy-duty fork truck battery, which we designed and built from scratch. We invested another portion of the timber proceeds in improving our land and house. – D.C.

Letter Re: Morgan Silver Dollars

Dear Editor,

In one of your guest articles today a gentleman mentioned that the old Morgan dollars are almost one ounce of silver. This is incorrect, and this rumor has been used by numerous unscrupulous dealers in the past to cheat customers. I’ve worked in the precious metals business for four years now, and I hear many such horror stories. Please let your audience know that the old Morgan and Peace dollars only contain .7734 ounces of silver, closer to three quarters versus a full ounce. – R.L.

Economics and Investing:

Saudi’s Issue Warning To Trump: Don’t Stop Saudi Oil Imports

o o o

National debt is growing faster than you think – B.B.

o o o

For anyone who believes that the Trump administration’s planned tax policies will result in an economic revival, I’d recommend parlaying some of their gold holdings into platinum, since platinum is more of an industrial metal. Presently, gold is selling for around $1228 per troy ounce, while platinum is at around $940 per ounce. In an industry-driven economic recovery, the gold-to-platinum price ratio is almost sure to return to its historic norm, with platinum selling at a substantial premium above gold. – JWR

o o o

Investors Shifting Billions Into Tangible Assets

JWR’s Comment: Mainstream financial advisers are still trying to push us into “solid mutual funds”. Bwaaahaha. Tangibles that are made in truly finite numbers (such as gun models that are out of production or limited production) or that are inherently scarce (like precious metals) only go UP in value in the long term. They are better than money in any bank, and most other investments. And, unlike Dollar-denominated investments, there is no chance that their value will ever just go “poof” overnight. Oh, and when we die someday at a ripe old age, our grandchildren will thank us sincerely, when they inherit those tangibles. Stack them deep, ladies and gents.

o o o

SurvivalBlog and its editors are not paid investment counselors or advisers. Please see our Provisos page for details.

JWR’s Recommendations of the Week:

Books:

Come and Take It: The Gun Printer’s Guide to Thinking Free, by Cody Wilson

Delorme Company State Atlases

Saving Stuff: How to Care for and Preserve Your Collectibles, Heirlooms, and Other Prized Possessions

Movies:

Ronin

The Last of the Mohicans

Music:

Getz/Gilberto: 50th Anniversary(Stan Getz & Joao Gilberto, with Antonio Carlos Jobim on piano) – For lovers of cool jazz and the Bossa Bova sound

Piping Hot: Celtic Bagpipe Collection

Podcasts:

The First 40 Miles:Episode 47 “The Bear Episode”

The Art of Manliness Podcast #157: Primitive Pursuits & Winter Survival

Instructional Videos:

Wranglerstar: A Very Bad Day

Backpacking Basics: How to Pack Your Backpack – The Outdoor Gear Review

Gear:

Survive Outdoors Longer Heavy Duty Emergency Blanket

Steiner eOptics Laser Devices Dual Beam Aiming Laser Intelligent DBAL-I2, PEQ-2, IR – Class I, 4mW

Odds ‘n Sods:

An outstanding read! The Dumbing Down: Lower the Standards to Meet the Men – T.P.

o o o

Prepping in Biblical Perspective – P.D.

o o o

Off-grid property damaged in NZ earthquake – an off-grid ecotourism business suffers from a 7.8 earthquake. Even the well prepared are not immune from larger events. – W.E.

o o o

New Zealanders leave supermarket shelves bare after being rocked by a 7.8-magnitude earthquake – forcing shop owners to ration food, milk and water – M.S.

o o o

23 incredible hidden homes – H.L.

Notes for Tuesday – November 15, 2016

After 16 months of debate, the Continental Congress, sitting in its temporary capital of York, Pennsylvania, agreed to adopt the Articles of Confederation and Perpetual Union on November 5th, 1777. Of course, the last of the 13 states, Maryland, took until March 1, 1781 to ratify the agreement.

Also on this day, Charles Dickens published the final installment of A Tale of Two Cities in Dickens’ circular.

o o o

Ruh-Ro! Shipping disaster looms as UPS workers vote to strike

Easy Fire Starting, by A.H.

Next to water, fire is one of the most essential needs for survival. No doubt you have six different ways to start a fire you call favorites and another twenty more you could use in a pinch. Here’s a twist on an old tried but true method.

I first learned this method from Boy’s Life many, many decades ago. I wasn’t even a Boy Scout. (They didn’t want me, but that’s another story.) Anyway, I’ve always liked this method for it’s simple elegance. However,, I thought of one tweak to make it an awesome choice.

Making the traditional fire starter is easy as pie. You’ll need an old newspaper, some paraffin or beeswax, and some string. You’ll also need two pans and a source of heat to melt the wax. I recommend using something disposable for the wax. Even a steel can should work. Make sure you have some tongs or some other way to handle the can.

Note, many prefer beeswax to paraffin. While one can list good arguments for both, why not experiment on your own? What stops some is a good, inepensive source of beeswax. The fact is, there is an excellent source right under your nose! Go to your nearest hardware store or building or plumbing supply and pick up a beeswax toilet ring. It won’t set you back more than a couple of bucks and will work just fine.

Wax is best melted “double burner” style. Put some water in the pan and heat it. Once the water is near boiling, put your can with the wax in the water to melt it. Your wax will melt, and you need not worry about burning it.

While the water is heating, cut some newspaper strips about two inches wide. Roll each strip tightly and secure with the string. You don’t need a super tight roll; leaving it a bit loose may actually help your fire starter work better. Leave enough of a “tail” so you can use it to dip the roll in the wax. Let it sit long enough to soak the newspaper well. Pull it out and leave it on a piece of paper to dry.

These fire starters are light and easy to pack or stuff almost anywhere. They burn well enough to get most any fire started with little effort. For better results, push the center of one out a bit before lighting it to make a cone. And now for the twist…

Roll a self-striking match into the center of the fire starter. I prefer the larger ones. Make sure the head of the match sits about an eighth of an inch from the end so it is well protected. If you want further protection, lay a small strip of paper over the head end of the matchstick. The goal is to keep it from rubbing against anything and lighting up when you don’t want it to.

Don’t worry about the other end breaking off. It can and does happen. Even so, you’ll have enough matchstick to push the match head through the end. You can strike the head on a rock or even a rough piece of bark to start your fire.

Now you not only have a waterproof fire starter, you have a built in lighter. It’s easy, inexpensive, and effective. What more could you ask for? How about adding some fuel to the fire?

Before you set your fire starter ablaze, you’ll want to make sure you put it to the best possible use. You’ll need some fine, dry stuff– tinder– to catch fire, some kindling and, of course some larger pieces of firewood. If you are trying to make it in the woods, I suggest you head for a stand of pines. Larger stands are often best, but you don’t want to get too picky if your life is on the line. A pine stand by itself can provide decent shelter, but more importantly it can provide enough fuel to burn a fire for several hours or even days.

For tinder you want the lightest, driest stuff you can find. However with this fire starter, great tinder is not crucial, as it will burn long enough to get some smaller kindling started. Even so, if you can find some dry fluffy stuff or an old bird’s nest, all the better. Otherwise, look for some dry pine needles at the base of the pine trees. If you are in a good stand, chances are you can find a tree with a sheltered portion to provide the dry spot you are looking for. Certain types of fungus fit the bill too, so don’t be afraid to check out what you find growing on the side of the trees.

For dry kindling, look in the trees. Pine trees often have dead branches that have not yet fallen to the ground yet. They are easy to break off and often dry as a bone. Some may even have some dead needles still attached. You may also find an entire tree that died and forgot to fall down. This could provide enough fuel to keep you going for a while.

Back in my youth, we would spend days camping and fishing by a small river. A campfire was often the center of activity. Wood was never a problem, as there was always plenty of dead branches and tress around. (My personal favorite was what we called “ironwood”. The trees were small scrub trees, possibly a variety of locust. They are sinewy and tough. The branches tended to burn well and last fairly long because the wood itself was pretty dense.)

While wood was plentiful, extended rain or a spring snow could make it hard to find anything dry. We quickly learned to find places to stash hunks of wood so it would stay out of the weather. Covering a pile with pine boughs helped a lot. While we were never in a survival situation, no campfire could easily send us packing for home. All we needed was enough to get a fire going. From there we could “dry out” the rest. Keep in mind that while wet wood is terrible for starting fires, it is not so bad for keeping a fire going, especially with a soft wood like pine that tends to burn fast. Soggy wood needs to burn off the water. This slows down the burning process somewhat, and that may not be such a bad thing after all.

My point is once you have a fire established, it would be a good idea to prepare for the unexpected downpour or any other situation that could drench your wood. As mentioned above, damp, soggy, or even wet wood is not much of a problem if you have a good fire going already. If you need to start or restart your fire, it pays to have some “fixin’s” stashed to help things along. The first place to keep your stash is at the bottom of your woodpile. You may want to keep this stuff off the ground a bit, as a heavy downpour could seep under and soak all your good work. In any case cover it up with a good hunk of wood to keep the rain off the top too.

How big should your fire be? It seems like most folks love a big blaze. I think this is a huge mistake. Big fires waste fuel, and that means you’ll spend more time hunting for something to burn instead of hunting for food or saving your energy. Your fire should be big enough to keep you warm and not much bigger. You don’t need much to cook or boil water. While a big fire may be a comfort for some and may even help to discourage predators, I see too many downfalls to justify going large.

Depending on your situation, you may or may not want your fire to disclose your location. If you require stealth, then the last thing you need is a raging blaze with lots of smoke. It’s best to keep it tiny and use the driest wood you can find. Again, building your fire under the cover of a pine stand can help as the heat and smoke can dissipate somewhat if it first drifts up through some pine boughs.

However, if you are looking for a rescue or need to otherwise signal your location, you can use some green boughs or pieces to keep your fire smokey. In this case, you’ll want your fire in a more open area or on the edge of the pines. You shouldn’t need much, as anyone looking for you should notice even a slim thread of smoke and move to investigate. The same goes for aerial searches. However, in that case I think the situation justifies a larger presence. I would want to be sure I could be seen from the air.

While my “easy fire starter” is compact and reasonably foolproof, I do not recommend relying on just one method to start a fire. You should have a good but inexpensive magnesium fire starter. It’s something you can keep with you at all times. Another great idea is to keep a 9-volt battery with a handful of #0000 steel wool. Jamming the terminals into the steel wool will start a small blaze that burns very hot. You can keep the terminals covered with a bit of electrical tape. Even better, cut down an envelope to fit the battery in and secure it with tape. You can then put the battery and the steel wool in a Ziploc bag. The steel wool will compact down fairly well so the whole unit will fit most anywhere.

With any of these methods, be sure to have your kindling and some burnable wood ready. No matter what method you deploy, you can use the ideas in this article to keep you warm dry and alive.

Letter Re: Ruger P Model

Again, Pat Cisco has covered a handgun that is close to my heart. Thanks, as always. The 9mm Ruger P-89 is actually the first handgun that I went and bought myself back in the late eighties. To this day I love this bulky “Tank” of a gun. dsc20012I am so comfortable with it that I also bought a P-94 in .40 caliber and a P-90 in .45 caliber. I remember when I bought the P-90 it was a used gun and was listed for just over $300. I offered $300 cash out the door, and that is what I got it for. To me these models are just good solid guns. I’ve never had any issues with them in performing, and if all else fails I can use the big solid gun as a weight to knock an assailant in the head with. If you find one of these in the gun store, try it out, and if you like it then buy it. You can’t go wrong with it, IMHO. I’ve added a picture of the three guns mentioned with the P-89 (9mm) on top, the P90 (.45) middle, and the P-94 (.40) on the bottom.

News From The American Redoubt:

Kristie Wolfe builds underground home & sets rural Washington hamlet. (Off-grid, of course!)

o o o

Eight takeaways from ‘Draining Oregon’: The big water giveaway

o o o

Joe Robertson Thrown In Solitary Confinement

o o o

Here is some news about a small company in Laramie, Wyoming: Vertical gardening is growing into the wave of the future

o o o

New program allows veterans to help each other heal in Montana wilderness

Economics and Investing:

GrubHub Loses MILLIONS After CEO Demands Trump Voters Resign – W.C.

o o o

Chinese Steadily Buying U.S. Entertainment Businesses – H.L.

o o o

India’s War on Cash and the Poor

o o o

The most expensive housing market in the world: Vancouver levies a $10,000 a year tax on empty homes. Not telling the truth and it becomes $10,000 a day.

o o o

SurvivalBlog and its editors are not paid investment counselors or advisers. Please see our Provisos page for details.

Odds ‘n Sods:

Video Tour: Ultimate Bug Out Vehicle

Here is another video with more rugged approach: Military Five Ton B.O.V.

o o o

A great 11-minute video: TOP TEN PREPPER “BUG IN” MISTAKES!

o o o

SurvivalBlog readers in the northeast who are looking for a 4WD vehicle should check out this auction in Pennsylvania, for a Humvee Ambulance. The long wheelbase ambulance variants only very rarely come up for auction!

o o o

France Plans to Implement Universal Biometric IDs – H.L.

o o o

The Far Left Is Planning The Biggest Political Protest In United States History For Inauguration Day

Notes for Monday – November 14, 2016

On November 14th, 1985, the Nevado del Ruiz Volcano erupted in Colombia, killing over 20,000 as nearby towns are buried in mud, ice, and lava. Scientists studying the volcano believed an eruption was imminent and had recommended an evacuation of the area, which was largely ignored, resulting in the high number of casualties.

Pat Cascio’s Product Review: Remington R51

2

Most readers probably believe that gun writers get specially picked firearms to test for their articles. I used to believe it myself, until I started writing about firearms. If I ever received a hand picked firearm from a gun maker, I sure didn’t know it. To the best of my knowledge, all my guns came off the shelves at the gun companies without being checked over or hand picked. As a matter of fact, I’ve had more than my share of lemons in the 25 years of writing about guns, and that is probably because I’ve tested so many different firearms. Some bad ones slipped through and got into my hands.

When testing firearms, I like to give the gun companies the benefit of a doubt. If I believe that I simply got a “bad” gun for testing, I’ll give the gun company a chance to correct it, and the gun gets sent back for repair or replacement. However, if I get another gun with problems I’ll report it as such in my article. I think that is fair enough. I don’t care which gun maker it is, some bad guns slip through. It may be a loose rear sight or a bad magazine came with the gun, loose grips, a heavy trigger pull, or whatever it might be; it does happen. A bad gun slips through, period!

dscf0627

A short story that I might have written about before. I purchased a brand new Taurus Model 85 .38 Spl snubby revolver at a gun shop. Again, this was a purchase and not a gun sent to me as a writer’s sample. I examined the gun at the shop, pulled the hammer back, dry fired it, and bought it. I took the gun out to shoot, and I could not pull the trigger in the double-action mode. I could cock the hammer and pull the trigger in single-action; however, in the double action mode the trigger couldn’t be pulled. The gun was sent back to Taurus, and in a couple of weeks it was returned repaired. Somehow one of the internal trigger parts didn’t get completely milled and the hammer couldn’t be pulled in the double-action mode! Like I said, a lemon slips through every now and then, and I don’t hold that against any gun maker.

dscf0629

Enter the Remington R51 semiauto handgun. The R51 is loosely based on the Remington Model 51. Don’t get confused here. The R51 is based on the old Remington Model 51 that came out around 1918 and was discontinued around 1927. It was a hot-selling gun in those days, too. It was based on the Pederson device, which in the case of the Model 51 allowed the breech block to slide rearward a little bit upon firing and the barrel was fixed in place. If interested, our readers can do the research on the Pederson device for complete information.

Remington came out with the R51 about two years ago, and it was a total disaster for them. I’m not talking about some “bad” guns slipping through to the consumer. I’m talking about guns that just didn’t work, period! Well, I guess some, but not many, guns did actually work most of the time. However, there were reports of the sights falling off the guns, guns that wouldn’t feed any type of ammo, guns that had a horrible trigger pull, and the list went on and on. Remington recalled the entire batch of guns with the intent of repairing them. Instead, Remington went back to the drawing board and completely went through the gun and improved it. Now, every now and then, when guns are recalled they are repaired or a part or two is replaced, but with the first batch of R51 pistols they just couldn’t be fixed. So, Remington engineers went and redesigned the gun. I applaud Remington for doing this. It’s not very often a gun maker will admit “oooops, we really messed up on this gun design…”

dscf0630

My local gun shop got in the newly reengineered R51, and I checked it out over and over again for a week. I worked a trade and took the gun home! Now, I really, really wanted to not like the R51. I checked it over closely, working the action, pulling the trigger, and dry firing it! I could only find a couple things I didn’t like, but overall I was rapidly falling in love with the gun. Remington calls the R51 a “sub-compact”. We can certainly agree to disagree on this point. It is a compact by my standards, not a sub-compact. A sub-compact is a gun I could carry in a cargo pants pocket. The R51 ain’t it!

The Remington R51 is at once a futuristic looking handgun as well as something that reminds me of guns from the early 20th century– retro! I like it, a lot. The R51 comes with two 7-rd magazines, and they both have stout springs. It takes a little of effort to fully load the mags. The black plastic follower has a raised “rib” in the front of it to get the 9mm rounds up into the chamber of the fixed barrel. (I have more on the barrel shortly.) The R51 weighs 20 ounces empty, and it has a frame that is made out of anodized aluminum, not polymer, as is the trend these days on semiauto handguns. The slide is forged steel and black in color to match the frame. The black checkered polymer grips are actually inserts. They fit nicely in the frame. They are not raised above the frame. There is a full-time ambi magazine release, not one that you switch from side-to-side. It is full-time and plenty big enough, not overly small, as found on many handguns.

dscf0631

The R51 has a white, three-dot sight system, and it is very fast to pick up. However, the rear sight can cause a slight, ever so slight, problem. Remington made the rear sight very futuristic and slick. It rises from the rear of the slide and gets higher as it gets further forward on the rear of the slide. The two white dots are nestled in the front of the sight, so much so that if there is sunlight or any light off to the side of the rear sight it can slightly shadow one of the white dots. I tried to capture this event with my camera, but the camera pics just wouldn’t cooperate. While this really isn’t a problem, with one of the rear white dots being a little bit shadowed, when the light is off to the side of the rear sight, I still thought it was worth mentioning.

The polymer trigger, at first, seemed a little bit on the small side; however, it really isn’t. It works perfectly, and the trigger pull is very crisp, releasing at 5.5 lbs. There is a tiny bit of take up and then resistance, and then the trigger breaks cleanly. My second small complaint is the grip safety. It makes a “click-clack” noise when you depress it and release it. It is more annoying than anything. Unlike the grip safety on a 1911, this one is hinged on the bottom of the frame, instead of up towards the top of the frame. It doesn’t operate nearly as smoothly as that on a 1911. Still, it gets the job done, and it depresses with about a pound of pressure. After firing the gun during my testing, I noticed that the “click-clacking” sound wasn’t nearly as noticeable, and it seemed to smooth out a bit, too.

dscf0632

On the front of the grip frame is some nice checkering at about 20 lines per inch. This is a nice touch. The grip safety has no checkering. The trigger guard is big enough for my trigger finger to get in there, just the perfect size. There are angled slide serrations on the back side of the slide for a sure grip when chambering a round. The ejection port is large. There are no worries about an empty piece of brass getting caught up in it. The slide release dropped the slide with a simple push on it.

Remington advertises that there is 25% less recoil, because the slide sits extremely low in the hand compared to other designs. And, to be sure, the gun rides nice and low, with the slide only about a quarter inch above the web of the hand when properly gripping the gun. That’s nice! It does have a very low bore-to-axis in the hand. I’m not sure if there is 25% less recoil. It’s hard to measure that type of event, but I’m sure there is less recoil compared to similar 9mm handguns. I will say that the R51 does get you on-target very fast, and it points extremely well. I’m a huge advocate for the lost art of Point Shooting, and the R51 does point naturally. When you bring the gun up to eye level, you are on-target! For more information on Point Shooting, check out my DVD from Paladin Press. My video is entitled “Tactical Point Shooting”. While it was done more than 20 years back, the information is still up-to-date. The DVD has myself, Sheriff Jim Wilson, and the late John McSweeney demonstrating three different methods of Point Shooting.

Remington says the grip angle is 20 dgrees, and it feels like it. I don’t recall any gun that points more naturally than the R51 does for me. The gun feels absolutely fantastic in the hand. Everyone who handled it said the same thing. Great job, Remington!

dscf0633

Now, to the 3.4-inch “fixed” barrel that Remington advertises. Not so fast there, Remington. The barrel is “fixed” in place when the gun is assembled and fired. However, the barrel is not permanently fixed to the frame. When you disassemble the R51 for routine maintenance and cleaning, the barrel is removed from the slide/frame. The barrel is fixed to the frame via the slide stop/release when the gun is assembled. The barrel does NOT move back and forth or up and down upon firing. A fixed barrel gun is almost always more accurate than guns that have barrels that move during firing.

My one main complaint, and it is still a minor complaint, is the disassembly of the gun. It is more than a little bit tricky, to be sure. Instead of my trying to explain it, go to https://www.remington.com/handguns/remington-r51 and watch the four and a half minute video that shows how to disassemble and reassemble the R51. Don’t get discouraged. It really isn’t all that hard after you’ve done it a few times. Practice! BTW, the “threads” you see on the barrel, they are not for attaching a suppressor. They are there to aid you in disassembly of the R51.

dscf0635

The barrel of the R51 is marked 9mm Luger +P. I don’t recall seeing any 9mm handguns that were specifically marked for +P ammunition. While owner’s manuals will advise you can shoot +P ammo in many 9mm chambered handguns, they also advise that it shortens the life of the gun. However, this gun thrives on 9mm +P ammo, and I did test some +P+ ammo in the gun. I had not a single problem with this hotter ammo. I had but one malfunction, and that was in the first magazine where one round didn’t fully chamber. Again, this was in the first mag, and no other problems were observed.

For my testing, I had a great selection of 9mm ammo on hand. From Buffalo Bore Ammunition, I had their 147-gr JHP Subsonic Heavy load, 147-gr +P Outdoorsman Load, Hard Cast FN +P load, 115-gr Barnes TAC-XP all-copper hollow point +P+, 95-gr Barnes TAX-XP all-copper hollow point +P+, and their 124-gr FMJ FN +P+. From Black Hills Ammunition, I had their 115-gr JHP +P, 124-gr JHP +P, 115-FMJ, 115-gr EXP (Xtra Power) hollow point, and their 115-gr Barnes TAC-XP +P load.dscf0649

The R51 just seems to run a little bit smoother with the +P and +P+ loads, compared to standard velocity loads. Go figure? The lone malfunction I had was with a FMJ load, and as mentioned it was the first magazine I fired through the gun. The round didn’t fully chamber. After that, I had no problems. As to accuracy, I tested the gun rested over a sleeping bag on the back of my pickup with the target at 15 yards. I had groups as small as two inches. They were with the Black Hills 124-gr JHP +P and the Buffalo Bore 124-gr FMJ FN +P+ loads. That is outstanding accuracy from a 3.4-inch barrel handgun, and I believe with more use and practice, I can get groups well below two inches. The gun showed a lot of potential. All the other loads didn’t exceed three inches. In all, I fired 300 rounds of ammo during my testing for this article and even more rounds after my testing that were not recorded.

I tried, I really tried to not like the R51, but the gun just grew on me. The more I shot it, the more I liked it. The more I handled it, the more I liked it. The few minor complaints, like the problem with the rear sight dot being shadowed and the grip safety making a little bit of noise plus the take-down procedure– those are very minor complaints to my way of thinking. The gun is super slick. There are, no sharp edges or corners. It is fast in the hand and very fast on follow-up shots, too. Full retail is $448 but can be found for under $400. This one is a keeper. Did I happen to mention how much I loved this gun? Yeah, I thought so.

– Senior Product Review Editor, Pat Cascio