If you’ve been a reader of SurvivalBlog.com for any length of time, you’ve surely seen the term Operational Security and the acronym OPSEC. And just as often, you’ve seen the term retreat security. These two go hand-in-hand. Together, they can make your surroundings as safe and secure as possible. Sometimes, depending on your location, this might be simple. But other times, it takes a lot more work to make your surroundings as safe and secure as you possibly can. Every once in a while, I have to remind myself to maintain both OPSEC as well as retreat security.
More than half my life, I’ve been involved in either public or private law enforcement. One position I held for about a year was, private alarms. On the day shift, I installed both silent and not-too-silent arms, most were in businesses, but some were in private homes. On the night shift, I answered those alarms. Silent alarms were connected to a central station, at the business I worked at, and whenever an alarm was tripped, it notified the person at the central alarm station, and they would radio whomever was on duty, and we would respond to those alarms. Sad to say, at that time, I worked in the Chicago, Illinois area, and the Chicago Police Department were very slow to respond to silent alarms, if they responded at all. Many times, when the CPD arrived, they would “secure” the outside of the business, while I went in alone, to do a building search. Anyone in law enforcement will tell you that, it is nearly impossible to search a large building on your own – not good!
While working the day shift, installing alarms, it could get pretty boring. The biggest job was running the wires all over the building and at times, these installations could take a week or longer. Then we had to check each alarm, to make sure it was covering the area we needed it to check – trying not to leave any areas where there wasn’t coverage – this also took some time. On big jobs, there might be two of us doing the installation. Then, we had to check an adjust the sensitivity of each alarm – if they were too sensitive, they would “trip” the alarm for no reason, or even a mouse running through it. Other times, they weren’t sensitive enough.
We used a lot of infrared alarms and they sensed movement. The infrared alarms didn’t sound, they would turn-on a red or green light on the alarm itself. At times, I would attempt to see how stealthy those alarms were, and I’d try to walk through them…if you didn’t move fast, and held yourself against a wall, you could get through an alarm without setting it off. However, other alarms covering the area would more than likely pick-up your movement. Then we had alarms that picked-up body heat, There was no way getting through them without setting them off.Continue reading“Budget Retreat Security, by Pat Cascio”