It is always exciting when Springfield Armory comes out with a new M1911 handgun. They never cease to amaze me, with the new and improved 1911s they are able to produce. It was with great anticipation, that I waited for the new Emissary. Unfortunately, Springfield closed down for two weeks, for inventory – and that was right at the time I placed my request for a sample of the Emissary. It was a long, long two week wait, for my sample to get shipped. Was it worth the wait? You know it was!
The Model 1911 has been around since, well…1911 – and the design shows no signs or becoming obsolete in any way, shape or form. If anything, this grand old gun design is more popular now, than it ever was. I can’t begin to count the different companies producing a M1911 – just a guesstimate, but I believe we probably have 50 or 60 different companies producing a 1911 in some form. In the Philippines alone, I believe there are at least 3 companies manufacturing 1911s, and my information says that the Philippines, produces more 1911s than any place else. And, to be sure, they are turning out some very good 1911s, at some competitive prices.
Back in the mid-1980s, I had an early M1911 from Springfield Armory – it was a Plain Jane model – basically a mil-spec version – nothing fancy about it at all. However, that gun just wouldn’t function out of the box – it had feeding problems, with all of the ammo I tired. Having been trained as a military armorer – one of my various MOSes, I knew how to make a 1911 run. In short order, I had that Springfield up and running like a champ. Over the years, I’ve owned almost all of the various 1911 models that Springfield has made – only a few I didn’t own – too expensive for my blood. However, they were all great guns.
Recently, I received the Springfield “Ronin Operator” model, and to me, it was the end all, do all 1911 I fell in love with it immediately – it’s a great Commander-sized, lightweight carry gun. I didn’t need any more 1911s. Well, I was wrong. When I received a press release on the new Emissary, I told my wife, I had to get one – even after I said I had “enough” handguns – and I do.
The Emissary .45 ACP is a full-sized, Government Model, that means it has a 5-inch barrel/slide and it is manufactured out of all-steel…it’s a heavy gun that comes in at 40-ounces unloaded. The slide is a bit different, in that, it has a triangle-type profile instead of rounded – I like it a lot. We have a front night sight that glows green during the daylight, and the rear is the new Springfield “U” shape white outline – not a night sight. The top of the slide is serrated, to reduce any daytime glare that can plays havoc with your sighting the gun. On either side of the slide – fore and aft, there are several deep and aggressive serrations, and you can get a great grip on these serrations when you need to chamber a round, to confirm a chambered round (“press check”), or unload the pistol. The slide is forged blue carbon steel and finished in a high luster blue.Continue reading“Springfield Armory Emissary 1911, by Pat Cascio”