Category: Review

Siege Stove Titanium Gen 4 Flat-Pack, By Tom Christianson

The appetizing aroma of roasting venison wafted enticingly from the twig stove in front of me. The sound of sizzling meat coming from the folding grill on the top of the stove reinforced the attraction. I rotated the grill from time to time to allow the venison steaks to cook evenly on each side. After about 20 minutes, the steaks appeared to be fully cooked. I removed the folding grill from the stove, opened it, and cut one of the steaks with my EDC knife to make sure it was fully cooked. It proved to be well-done. I used my …


DPx Gear HEST Framelock Urban OD Knife, by Thomas Christianson

With a CPM 154 martensitic stainless steel blade and a titanium alloy frame, the DPx Gear HEST Framelock Urban OD knife is made of some of the highest quality knife making materials known to mankind, and is designed for a lifetime of hard use. It takes an excellent edge and holds it well, but can be difficult to re-hone once it becomes dull. Designed and manufactured in these United States, the knife offers an excellent, albeit somewhat pricey option for everyday carry ($280 at the time of writing from dpxgear.com). The Backstory As a part of my ongoing quest to …


Valley Forge Damascus Bowie, by Pat Cascio

There was a time, some years ago, when many of the knives coming out of Pakistan were pure junk, and I mean junk! This has changed over the years, and now some high-quality knives are coming out of Pakistan, at very good prices. I previously covered another Damascus fighting knife, made in Pakistan, and it was a 100% winter in my opinion. Today, we’re looking at another selection from Pakistan and it is imported by Cutlery Corner Network. They have television shows daily on cable television. Many of their knives are not up to par, in my estimation. Then again, …


Gossner UHT Shelf Stable Milk, by Thomas Christianson

Icy gusts of January wind were driving sheets of snow relentlessly across the slick pavement. I was cautiously creeping along in my car, making my way home from work. The weather forecast for the coming night was threatening. As I drove past a grocery store, the gloomy winter twilight revealed a crowded parking lot. Shoppers were flocking to the store to buy the remaining stocks of bread, milk, and other supplies in anticipation of being snowed in. I was able to drive right on by the store without the need to stop. My wife, “Kari” had stocked our pantry well …


Bear Edge Model 61125 Folding Knife, by Thomas Christianson

A pair of eyes glowed brightly in the darkness of the woods beyond the reach of my headlamp. I was not concerned. The woods surrounding our home are filled with a host of furry creatures, most of them benign. A stroll around our property can resemble the meadow scene from Disney’s Bambi. Birds flit through the branches, and rabbits and squirrels leisurely hop off into the undergrowth. So it is not at all unusual to see eyes glowing in the darkness when I take the dog for a walk on a winter’s evening. Then the eyes started moving toward me. …


Maglite Flashlights, by Thomas Christianson

I am a flashlight junkie. I love flashlights. I love big flashlights and small flashlights. I love bright flashlights, and flashlights that project a gentle glow. I love flashlights with AAA, AA, C, D, or rechargeable batteries. I love flashlights with polymer cases, rubberized cases, wooden cases, bamboo cases, and metal cases. I love flashlights with standard incandescent, halogen, krypton, xenon, or LED bulbs. I just love flashlights. Sometimes my addiction causes strains in my relationship with my wife, “Kari.” She says things like, “Do you really need another flashlight?” or “How many flashlights does one man need anyway?” I …


Patching Seahorse Protective Cases, by Thomas Christianson

A number of months ago, I purchased two Seahorse protective cases at a thrift store. Someone had drilled and cut holes into them before making the donation. I recently patched the holes in the cases using J-B Weld and fiberglass fiber tape. I am very pleased with the outcome. Based upon these good results, I would recommend all of the products involved for their usefulness: Seahorse Protective Equipment Cases, J-B Weld Original Formula, and fiberglass fiber tape. Buying the Cases I bought the two Seahorse Protective Equipment Cases at a bin sale at a thrift store outlet. At a bin …


Keen American-Built Boots, by Thomas Christianson

I recently bought a pair of Keen American Built Boots at a consignment store. They cost me $44.99. These Braddock Waterproof Mid Soft Toe Boots run $220 per pair, new. The Keen Braddock mid-cut boots are very sturdy, though the soles are somewhat stiffer than I prefer. They are also extremely warm, making them most suitable for cool weather use. All in all, they are decent boots, and American-made. But they somehow lack that measure of comfort that gives a pair of boots a place of affection in my heart. It may just be that my feet are a funny …


Silver Stag Lion, by Thomas Christianson

The Silver Stag Lion is an heirloom quality, primarily handmade, semi-custom knife. It has a razor-sharp three-inch blade made of D2 tool steel and a handle made from naturally-shed deer or elk antler. It is 100% made in these United States. It is by far the finest knife I have ever carried. At the time of this writing, it was available for $169 from www.silverstag.com. The major drawback of the knife is that it is such a beautiful piece of craftsmanship that I am almost afraid to use it. It seems to deserve a place of honor in a display …


Magazine Pouches Are a Must, by Pat Cascio

I won’t mention any names, to protect the innocent. However, I have a long-time friend – he used to be one of my martial arts students more than 30+ years ago. He was a great guy. We consider ourselves brothers – and couldn’t be any closer if we were actual blood brothers. Every now and then, we butt heads on something, but always remain brothers. I no longer teach any martial arts classes or firearms classes – my beat up ol’ body just doesn’t allow it these days. Every now and then, I’ll take a friend out for some shooting …


Howell Arms Conversion Cylinder, by Thomas Christianson

I recently received a Howell Arms .45 Colt Conversion Cylinder for my Pietta M1858 cap and ball revolver. The conversion cylinder allows me to fire .45 Colt cartridges (also commonly but erroneously known as .45 Long Colt) through the revolver. After some fitting, it works extremely well, and is a lot of fun to shoot. The Backstory I have previously written a review in SurvivalBlog about the Pietta M1858 cap and ball revolver that I acquired from Elk Creek Company. Shooting a cap and ball revolver is a lot of fun, but loading one is somewhat time-consuming and cumbersome. A …


Pietta M1858 .44 Remington Replica, by Thomas Christianson

Last summer, I tested a Pietta Blackpowder M1858 .44 Remington replica that I acquired from the Elk Creek Company. It was fun to shoot, interesting from a historical perspective, and is not classed as a “firearm” under Federal law. If there were a long-term technological setback, it would be easier to manufacture ammo for this replica than it would be for my more modern firearms. Although shooting cap and ball revolvers is fun, loading them is a somewhat time-consuming process. It is easy to understand why most people select cartridge handguns over cap and ball revolvers if they have the …


Thyrm Pyrovault Lighter Armor, by Thomas Christianson

Thyrm Pyrovault Lighter Armor encloses a Zippo lighter insert in a sturdy waterproof polymer case. In addition to making the insert waterproof, the case slows fuel evaporation from classic liquid-fuel inserts, so that the time between fillings can be measured in weeks rather than in days. The case can be opened and the insert operated with one hand. It greatly enhances the usefulness of the Zippo lighter insert. At the time of this writing, the Pyrovault Lighter Armor was available from Thyrm for $29.99. The Backstory On October 10, 2021, SurvivalBlog published my article about using a sleeve cut from …


Cold Steel Range Boss, by Thomas Christianson

The Cold Steel Range Boss is a light, sharp, thin, and tough knife for everyday carry (EDC). With a manufacturer-suggested retail price at the date of this writing of $51.99 and available online for as low as $37.05, it represents a great value for the cost-conscious knife buyer. It is also a good, solid knife for the buyer for whom money is no object. Background I recently asked Cold Steel if I could review their four-inch Range Boss knife in black. They were kind enough to agree, and a few days later a package arrived via FedEx from GSM, LLC., …


RedHead Ultimate Work Pants, by Tom Christianson

RedHead Ultimate Work Pants have an appropriate name: they are a good pair of pants to wear while working. They are comfortable, durable, stain resistant, and well-cut. The pants, which are manufactured in Bangladesh, are made of a lightweight cotton canvas. They retailed for $39.99 at Bass Pro Shops at the time of this writing. The Backstory I recently decided that two of my pairs of work jeans had reached the end of their useful life. The holes had gotten large enough that I had a hard time getting my feet through the legs of the pants rather than through …