I took your advice and ordered some FN-FAL magazines from What-A-Country, and they were promptly delivered. However, I was surprised to find that the military surplus magazines were quite dirty with what appeared to be black sand, and slightly oily. Is that common for used magazines? As a first time battle rifle owner making my first military surplus purchase. I don’t know if this is common practice or not. If it is, what is the best way to properly clean the magazines so they can be used? Any advice or a link to a web site with additional information would be appreciated. – SteelerFan
JWR Replies: That isn’t very unusual. When buying military surplus, I’d much rather get oily or greasy mags, because that indicates that an effort was made to protect from rust in all those years of storage.What-A-Country imports most of their magazines from Israel. And the Israel Defense Forces (IDF) has almost always done a good job with storing weapons and accessories. (For example, I’ve seen Lee-Enfield rifles that had been in storage in an Israeli warehouse for 50 years that still looked arsenal-new, once the grease was removed.)
I once bought a large batch of Thompson SMG magazines that were practically pumped full of grease. Yeech! It took a lot of time to degrease those.
OBTW, if the magazines that you bought are grungy inside, it doesn’t take long to disassemble them. If there is a lot of grease, you’ll need to use a solvent (such as Birchwood Casey Gun Scrubber), otherwise just wiping them down with paper towels will usually suffice. But again, be sure to examine their interiors. (Needless to say, the usual safety provisos on avoiding skin contact and inhaling vapors of Tri-Chlor-based solvents apply!) One you’ve cleaned the magazines inside and out, wipe them down with a light coat of oil, or perhaps a heavy coat if you live in a region with high humidity. and for long-term storage in a damp climate, RIG is ideal. (But then, of course someday you’ll be back to square one–removing grease, before use.)