Prepping for Fishing in TEOTWAWKI, by W. in Atlanta

Much has been written in these pages and elsewhere about prepping for food: maintaining protein and caloric intake. Fish are an excellent source of protein, and will continue to be so under most post-SHTF scenarios. How does a person go about preparing to catch them, and convert them to food?

I write this as someone who has had the good luck to have fished over the last fifty plus years in every continent but Australia, and survived, and who has designed and built hundreds of rods in pursuit of every conceivable species of fish using a wide range of techniques. I prefer the anonymity that others on this blog use, but my articles on fishing have appeared in national and regional magazines over the years. I also happen to be a prepper. More correctly put, I have been a prepper for a while without realizing it, until I read Patriots and other writings by Mr. Rawles, and others!

I must qualify any recommendations I make:

• First of all, fishing gear is the subject of exhaustive discussions on every possible media. It’s the nature of things that fishermen and women get very detailed, and opinionated, in what works and doesn’t. By making recommendations, it is not my intent to stir the pot. I have tried to keep my comments as brief and as practical as possible.
• Secondly, name brands of gear. I happen to lean towards Penn and Abu reels with a preference for the older models, and make most of my own rods from blanks made by Calstar, Seeker, Loomis, Sage, Lamiglas, Amtak, Cabela’s, Tiger, and more. However, these preferences are meaningless for the purposes of this letter. There is a lot of other gear out there that is high quality, made by these manufacturers and others such as Shimano, Daiwa, Bass Pro shops and others. Instead my recommendations are based on line capacities, which drive size, weight and to some extent drag performance, and commonly available rod lengths and lure sizes. You must pick out the outfit(s) that fit your situation.
• Third, I am assuming in a TEOTWAWKI situation you will have no access to a boat (or if you do then you may lack a vehicle to pull it with) and will be on foot. In a boat, you can get by with a lot less casting, so the equipment recommendations may be different. What I present below is a set of opinions based on distillation of a lot of ideas and my experiences.
• So, this is addressed to those intrepid souls who have their wits about them, even if not a lot of fishing infrastructure, as they diligently prepare for scenarios they may be confronted with. I’ll start with outfit types then move to terminal tackle, then inexpensive alternatives.

The spinning outfit. If I were limited to a single outfit for a vast majority of the situations I would encounter anywhere in the Americas it would be a spinning outfit. The technology enables a user to cast and manipulate small and large lures and baited hooks efficiently across a wide spectrum of applications, and species of fish.

The actual size outfit will vary, however, depending on where one is located:

• For 80 percent of the applications in the Americas: that is where one may encounter fish up to, say, 20 lbs., in relatively unobstructed water, a rod in the 6 ½ – 7’ range designed to handle lures from ¼ to ½ ounce or so, with a reel having a line capacity of 200 yards of 10 lb. test line will handle things nicely.
• If in higher altitudes and latitudes where trout, small salmon and char predominate, I would lean toward a lighter outfit; something in the 6 – 6 ½’ length designed to handle lures from 1/8 to 3/8 ounce or so, with a reel capacity of 200 yards of so of six pound line.
• In lower altitudes and latitudes, in water full of trees and brush, as well as for light salt water use, I would go with a rod in the 7’ range designed to handle lures from 3/8-3/4 or so, sporting a reel having a capacity of around 200 yards of fifteen pound line.

A decent outfit meeting any of these descriptions can be had starting at about fifty bucks, and going upward from there (substantially upward!).

If you can, buy extra line for the reels in various line classes at, above and below the recommended ones, as these can be used as replacement lines or to quickly add a leader to the existing line of a smaller diameter to fool finicky fish, or larger diameter to prevent toothy fish such as pike (in fresh water) and mackerel (in salt water) from biting through your line.

The spin casting outfit. Also called “push button” “closed face spinning” and “under spin” reels, depending on whether they are mounted above or below the handle on a rod, these are instantly recognizable by their enclosed shroud inside which the line is stored. These are great outfits for kids to learn fishing with, but they have no place in a prepper’s set of tools, unless nothing else is available or as a backup.

I have a number of these reels, including some expensive models, and observe that drags are uniformly weak and the line pickups are poor. The line pickups for example are either a stationary – non-rolling – pin of steel or coated material, or are integral to the rotating head and have a serrated edge, not unlike like a bread knife, with a predictable impact on line wear. With these reels the line quickly twists and frays, as any dad with a fishing kid can attest. As a result, line life is very short compared to reels that have ball bearing line rollers such as spinning reels or reels where there is very little contact with the line as it is retrieved, such as bait casting reels.

Another factor: the design of these reels is utterly incompatible with saltwater because of its closed face which traps salt water, and quickly rusts the reel out unless you have the time and means to meticulously clean and air, re-lubricate and reassemble the reel after each use. So unless you have plenty of extra line and spare time to maintain the equipment, I wouldn’t bother with spin casting if prepping for a wide range of situations.

The fly outfit. These are far better suited to the gathering of fish protein than some would think, a fact which has been underlined by some well thought of outdoor writers such as HG Tapply of Tap’s Tips (Field and Stream) fame which I used to read avidly. In reality, the fly outfit is deadly at laying out not only flies and streamers, but also dangling worms from a distance, even flipping perch bellies for bass, pickerel and pike.

Once you figure out you are casting the line rather than the lure, things fall into place. Another plus is that, with a little practice, once you have made your first cast into an area it takes only a second or so to place a lure or bait into a productive fish zone if it has drifted away or if you are working a shoreline: there is no need to retrieve the line and cast it back out – you simply lift it off the water and with a flick move it to the next spot.

Simplicity is the key. For example, there is little need for a reel to do anything but hold line, so you can strip out the line you need when you start fishing, then wind it back on the reel when you are done (or need to move on to the next spot and don’t want to trail loops of line behind you on the ground). The fish is fought by stripping the line backward through your fingers. Thus, for most applications the typical “single action” fly reel is dirt simple: a spool with a 1:1 gear ratio which rotates on an axis mounted on a frame.

Some of the fancier reels for large fresh and salt water fish have serious drags so you can fight the fish “from the reel”. There are also “multiplier” reels where one turn of the handle generates more than one turn of the spool. But these are not a requirement for the vast majority of situations the prepper is planning for. The KISS principle applies here.

If I were to limit myself to a single fly rod, I would get something approximately 8 ½ – 9’ long that matches to a 7 or 8 weight line (with a preference for a “weight forward” or “bass bug” tapered line if I had either of those options over “level” or “double tapered” line) and a “single action” reel. I would attach a tapered leader to the fly line say 7 1/2 -9 feet long, and going down to as small as six pound test (10-12 lb. test for heavy situations such as farm ponds and larger fish).

For alpine lakes and rivers I would select an 8’ – 9’ rod that matches to a 4 or 5 weight line, with the shorter length rod being better suited to brushy streams, and the longer rod being for more open spaces. Leader would taper down to about 4 lb. test.

People ask, doesn’t one need an advanced degree in entomology (bug science) to be able to successfully fish a fly rod? Heck no! Here’s why: lots of bugs are “terrestrials” which is a fancy word for anything other than the genteel critters with the Latin names that “match the hatch”: Terrestrials are grasshoppers, bees, spiders, crickets and the like which occur pretty much everywhere. You can buy a pack of these flies at your local china-mart for a few bucks, and along with a few bare hooks (for garden worms, larvae, and strips of fish belly) are pretty much all you’ll need for terminal tackle for the fly rod. Tie one of those terrestrials on and the fish will hit it even if it does not match exactly their normal fare, because it will look like something that got blown into the water by the wind. By the time they taste it: too late!

You can buy a complete starter fly fishing setup including rod, line, reel and leader, with perhaps a few flies thrown in for about $80 at Wal-Mart or any reputable mail order catalog.

The bait casting outfit. This is a generic term for the revolving spool reel. This gear is most popular in the Americas in applications involving the casting of artificial lures and baits of 3/8 ounce and larger. They are by far the furthest casting reels in long distance casting competitions when a large weight of about 5 ounce is cast out three hundred yards and over (no kidding)! They are also excellent for trolling and bottom fishing, as quality models have the line capacity and the drags are able to tame very large fish. They happen to be my favorite category of reels.

For practical purposes, however, the minimum lure (or bait) size limitations will limit the usefulness of bait casting. In most fresh water applications the deadliest range of lures and baits for gathering fish protein is from about 1/16th to ½ ounce, and bait casting gear can comfortably accommodate only the upper end of that range. They are also more difficult to learn to use than, say, spinning gear.

Therefore, unless my retreat is on an ocean beach or a boat, I would not recommend this type of gear for the prepper except as a backup, especially when other choices are available.

Decent bait casting outfits can be had new for around seventy dollars and up.

Rod considerations. In the non-prepping world rod choices are generally lumped into one-piece (the best choice for most mainstream saltwater rods, and many bait casting rods), two-piece and “travel” (which may have three or more rod sections).

In the prepping world, where we are interested in addressing a wide range of applications with as little gear as possible, the choices narrow considerably (although they are still ample). First of all I would eliminate one piece rods, unless your plans call for staying in one place – they lack the portability of the multi-piece rods.

So the question becomes “am I better off with a two piece rod or a multi-piece “travel” rod?” The answer is not simple, because of a general rule that for the same amount of money, the quality generally goes down the more pieces your rod has. The best value is therefore a two-piece rod. However, if space and convenience is at a premium, a multi piece travel type rod may be the best alternative, even if more expensive. My advice would be not to scrimp, if you go the multi-piece route.

One option you may find very attractive is a combination travel fly and spin rod: one rod that can handle both fly and spinning applications. Eagle Claw and Fenwick came out with these in the sixties, and they were quite the ticket in those days, but the selection is greater now. This setup would be tailored for the lighter applications, however.

What about terminal tackle? For an extreme post-SHTF situation, you can get by with just some hooks, and perhaps an assortment of sinkers. One rule of thumb to follow is that – generally – you can catch a big fish on a small hook, but not a small fish on a big hook. Here’s a punch list since we have the luxury of shopping now. These are available from any Wal-Mart (“China mart”) or outdoor mail order business:

• Hook Assortment from about size 12 to about size 2. For saltwater, expand this hook size assortment to include hooks up to 4/0 (you’ll still want the small hooks for catching smaller fish and bait).
• Sinker assortment from split shot to 1 ounce.
• Bobbers or floats, from marble size through golf ball size.
• Pre-filled “Beginner tackle box” sets loaded with hooks and sinkers, as well as some assorted lures can be had for perhaps 10 bucks.
• Line – lots of spools in sizes ranging from 4-15 lb. test, as well as some 30-40 lb. test to use for leader material. This is inexpensive stuff. What you do not use will make excellent trading stock!
• Some wire leaders. For most purposes single strand “piano” wire of 27 or 36 lb. test is the best of the alternatives.

Selection of artificial lures, some staples of which are:

• Rapala floating minnows – silver in the 7 to 11 cm sizes
• Mepps spinners – size zero through size 3. Also buy small ball bearing swivels if you use spinners.
• Assortment of bucktail jigs.
• Assortment of jig heads (unpainted) in sized 1/32 through ¼ oz
• Assortment of “Curly tail” plastic lure bodies (which attach to the jig heads, above).
• Selection of “terrestrial” flies, if you plan to fly fish.
• A few “muddlers” “”black gnats” and “coachmen” (all purpose flies)

Tools:

• A couple fillet knives. These have a long, thin and flexible blade that allows you to separate the fish flesh from the bones.
• A sturdy knife that can be used to sever heads from fish, or to cut bait with.
• A simple knife sharpener. Can be a sharpening stone or steel.
• Pliers: at a minimum a pair of needle nose pliers for removing hooks from fish. If you are in catfish country I’d add a standard set of pliers (for breaking spines and skinning)

The $5 or less solution! There are millions of folks out there (particularly outside the industrial northern countries) who fish with nothing more than a piece of line with a hook on the end. Now, their technique may not be as productive as with fancier gear, but if you are either not able or not interested in investing in this aspect of your survival preparations, you can certainly pull a kit together that will do the job, inexpensively even if not perfectly.

Line – there’s really no substitute for monofilament line. You could use cord, but you’ll still need a section of clear leader, and the cord may fall apart when wet. If I were limited to only one piece of line, and space was limited, I’d select about a 100 foot section of 30 lb. test line. For alpine lakes and rivers, I’d drop that down to 10 lb. test line. You can buy a hundred yards of line at a discount store for a couple bucks, easily.

Reel – For storage, you can store line simply by wrapping it around a piece of cardboard with a v notch at each end to hold it securely. For a reel, you can use, literally, a beer can – lots of people do. The line is wrapped around the outside and the “cast” is made by holding the can in one hand and pointing the can at your intended destination, then whirling the baited hook on circles with your other hand and letting loose with the line peeling off the end of the can. The retrieve is made by holding the can in one hand and winding the line back on with the other.

A variant on this is a cleaned out tin can with a plastic lid on it. The line is wrapped around the outside as per the beer can example, above. The can itself can be your tackle box, containing hooks sinkers, lures, etc. held in place by the removable plastic lid.

Other economical substitutes:

• Small sinkers can be made from discarded metal nuts (as in nuts and bolts)
• Big sinkers can be made from old spark plugs that have the electrode squeezed down to form a closed loop you can tie your line to. Clean off the smelly oil and gas sludge before using, the odor may (will!) repel fish.
• Bobbers can be made from bottle corks. They can be attached to the line in a number of ways: a needle can thread the line through where it will be held under tension; or you can drill out a hole in the center then thread the line through, holding it in place with a match stick. Alternatively you can simply attach the line to the exterior of the cork with a rubber band, a twisty or a zip-tie.
• The Boy Scouts tout the many uses of paperclips, including for hooks, but do yourself a favor – just buy an assortment of hooks.

The bottom line is that prepping for fishing is like lots of other categories of prepping. You can get about as detailed as you want. Just cover the basics if you have to!