Letter Re: Sources for Fasteners for D.I.Y. Web Gear Fabrication

Good Morning, Jim!
I am a long-time regular reader here with a question. On your blog you’ve been recently posting about various web gear, etc. I have long desired to build some of my own gear using nylon straps and high strength plastic buckles, tensioners, and adjustment components typically found on outdoor gear. The problem has been finding a source/supplier for these components. Do you have any recommendations?
Thank You, – John Geerman

JWR Replies: In my experience, piece parts for Fastex buckles and similar parts are ridiculously expensive if bought new in small quantities in a “brick and mortar” retail store. Lower prices can be found in bulk online (for example, at eBay), REI (Fastex quick release buckles and “tri-glides”) and Reef Scuba (for nylon webbing material). But I’ve found that it is often best to simply find “trashed” military surplus backpacks and well-used older generation Load Bearing Vests (LBVs), and cannibalize them for their hardware. Check around at your local surplus stores to see what they have.

The Swiss Army surplus waterproof Alpine backpack extensions, for example, have a profusion of redundant hardware–including the hardware and straps such as the extraneous tie-down straps like those designed to hold down a Swiss “Darth Vader” helmet when stowed on the back of the pack. If you take half of these off, you still have a quite useful waterproof bag, plus a big pile of male and female Fastex type connectors, short length of straps, and tensioners.