Letter Re: Junk Silver Bags–No Need to Inspect and Count 10,000 Silver Dimes

Hello Jim,
I am hoping that you can verify something for me about the [U.S. circulated} 90% silver [coin] bags. I just received my order of a $1,000 face [value] bag from The Tulving Company of California. I believe that I saw their name [mentioned] on SurvivalBlog a number of months ago. They have great customer service and the product came faster than they had promised. What I received from them came shipped in a plastic paint pail and inside was a flour sack, cloth bag, full of dimes and the weight printed on the UPS sticker showed 57 pounds. Sounds good, I think, but the bag inside has no markings and wasn’t sealed or sewn shut. It was just closed with a zip tie plastic fastener. Is this right, or should I be concerned? I am considering purchasing additional bags from them and my wife brought up that maybe I should ask a few questions instead of just accepting this as being appropriate. I really want this to be fine because I don’t want to have to count out all these dimes! Your insight would be greatly appreciated by my family! – S.C. in Washington

JWR Replies: Yes, The Tulving Company has been mentioned several times on SurvivalBlog. Tulving is a reputable dealer, from all reports. Don’t worry that the bag wasn’t sealed. In fact, most $1K bags are NOT sold sealed or sewn. Typically, dealers run any pre-1965 silver coin orders that are large enough to be sold “loose” or bagged (rather than in rolls) through a mechanical coin counter. A quick visual inspection will show you that all of the coins are pre-1965. (Scan for any rims that show a copper streak–which would indicate that any post 1964 clad copper coins got mixed in.) There is certainly no need for you to count 10,000 dimes. As long as the bag weighs at least 52 pounds, then you got your full 715 troy ounces of silver. (BTW, that +/- 715 ounce figure also applies for circulated silver quarters and half dollars. But because of their different specifications, silver dollar $1,000 bags contain around 765 ounces of silver.)

BTW, the quick way to gauge the value of a $1,000 bag versus the spot price of silver on any given day is simply to multiply the spot price by 715. Thus, at yesterday’s spot silver price of $13.85 per ounce, your $1,000 bag of dimes is worth $9,902.75. (Or just think of it as 9.9 times face value.)



Letter Re: Recommendations on Compact .223 Rifles

Jim,

I came across this .223 rifle made by Kel-Tec that folds down to 25″ and would fit into some backpacks. Let me know what you think. – G.C.P.

JWR Replies: The Kel-Tec SU-16s are reportedly fairly reliable and accurate. It is nice that they use standard AR-15/M16 magazines, which have become ubiquitous in the U.S., the Philippines, and several other countries. However, I have heard that SU-16s have three significant detractors, the first two of which concern the stock:

1.) The stock is relatively fragile and hence not suited for vigorous field use. They might suffice for target shooting, but I have my doubts that they would not stand up to the vigors of a worst case survival situation where you might have to repeatedly jump to a prone position or perhaps even use the buttstock as a weapon. (“Buttstroking” an opponent.)

2.) It is difficult to get a consistent “cheek weld” on the stock to allow accurate shooting.

3.) As currently shipped from the factory, SU-16s do not come with a flash hider. Yes, they can be retrofitted, but that is a +/- $100 gunsmithing job.

If you want a compact .223, I would instead recommend a Rock River (or similar) M4 carbine clone with a 16″ barrel. (Commonly called an “M4gery.”) They are very compact when broken down into upper and lower halves for backpack carry. Re-assembly and loading takes less than 15 seconds. They are also relatively compact once assembled–that is if the stock is in the collapsed position.

If absolute compactness is a must (such as for vehicular defense), and you only expect short range shooting, then you might opt for an Olympic Arms AR-type pistol. (Note: for these pistols to be legal in the U.S., they must be assembled on a special “Pistol” designated AR-15 lower receiver. If you want both a short barrel and a buttstock, then in the U.S. such a gun must be federally registered as a Short-Barreled Rifle (SBR). For example, you could register an M4 receiver as an SBR and then re-assemble it with a 11.5 inch barreled upper receiver group. One captivating alternative for those of you that prefer HK designs, is getting one of the new semi-auto Vector V53.223 (HK-53) SBR clones with a collapsing stock. Sadly, these too must be registered as SBRs in the U.S.



Two Letters Re: Folding Fighting/Utility Knife Recommendations?

Mr. R.:
I read SurvivalBlog regularly – great site – and have been a contributor. It’s worth every penny. I would strongly encourage folks to check out Smokey Mountain Knife Works. I’ve gotten both CRKT and Cold Steel items there at very deep discounts. They’ve had both Kasper and Steve Ryan folders and fixed blades on sale at less than half their sale pricing elsewhere, both CRKT produced versions of those gentlemens’ customs. The Ryan Plan B fixed and the Model 7 folders are knives to have. They’ve had both full-size and compact Pendleton Hunters from Cold-Steel – not just a great knife but they come with adjustable Concealex sheaths, and once again, at prices almost too good.
Browse at Knives Plus for their Blade Clearinghouse. Spyderco has a new line of outsourced knives – the Byrd Line – and their Raven and Crows are the real deal; all metal folders that are very well-made, tight, and sharp. The Raven and Crow are less than $20, for what is essentially a $40 to $50 knife.
I’ve been “prepping” since ’97, filling in the edges as I go, and for “tools” these two sites are way ahead of the pack in choice and performance for price. Trust me – I’m a doctor, and there are no better prices to be found. – MurrDoc from NM

 

Dear Jim:
I carried a folder for years, but after taking a partial-contact knife class (with dull training blades) I am convinced that a fixed blade is much preferable Bottom line – have you ever tried to open a folder while being tackled or hit? Having done some well-padded half-contact sparring, I can testify how hard it is to pull off fine motor movements with an adrenaline dump, and under attack.

In a dynamic assault you just pull a fixed blade and go, not, “pull it, lever the folding blade open, and then make darn sure it’s locked before fighting, so you don’t cut your own fingers off!”

Just like gun fighting, to get a good idea of what really works you must do a realistic combat simulation – Gabe Suarez has some of the best insights here:
http://www.suarezinternational.com/igfdebriefing.html

It might even be legal in some of the semi-free states to carry a fixed blade!
http://pweb.netcom.com/~brlevine/sta-law.htm

Granted, a fixed blade is tougher to carry – but there are options. I like inside the waistband, appendix carry, clipped to the top of the pants, behind the belt.

Knife fighting is scary business! The more I learn about Close Quarter Combat, and how the bad guy who initiates has the advantage, the more I want to be well armed and trained. – OSOM – (Out of Sight, Out of Mind)

JWR Replies: I agree that fixed blade knives are definitely superior for self defense. The problem is that most people don’t have the discipline to carry a sheath knife daily. It is quick and easy to put a clip-back folding knife you trouser pocket every morning. I do just that, every day. (Except of course when I take a commercial airline flight.) But it takes far greater discipline to transfer a sheath knife every time your trousers go in the laundry, or every time that you switch from work jeans to “church” pants. There is the added complicating factor of societal acceptance. A clip-back folding knife elicits hardly more than a second glance–at least outside of big eastern cities. But a sheath knife is a whole ‘nother matter in many social situations. They are also banned from carry in many U.S. cities and counties. IMHO, the practical compromise between the two approaches is to carry a fairly large folder with a very positive automatic lock. (Such as found on most “liner” locks.)

BTW, training is crucial. Close quarter training is available from Front Sight and several other qualified training organizations.With the right training, drawing and opening a folder becomes a fluid, almost automatic reflex. Perfect practice makes perfect.



Odds ‘n Sods:

A web search turned up this old article by Grits Gresham about Idaho’s famous back country solitary “Buckskin Bill” (Sylvan Hart)

   o o o

The high bid is currently $110 in the SurvivalBlog Bandwidth Fund benefit Book Auction. Please e-mail your bids before May 30th. Thanks to Kurt and Angie Wilson of Survival Enterprises for sponsoring this fund raiser!

   o o o

A site that tracks the intrinsic (base metal) value of U.S. circulating coinage and circulated silver coinage.





Letter Re: Request for Advice on Backup Power for a Well Pump

Jim:
Can you or one of the gang offer some advice? We live in a nicely secluded area, but are all electric. We have a well. Our well man says it is impractical and very costly to install a hand pump on our present well setup.
What would be a practical procedure to utilize a small generator to power the water well when/if the power goes down for a week or so, for short
term use. Do we need an electrician to hook things up, and exactly what? I realize, long-term, greater expense will be needed, and it is in our priorities to so accomplish. However, a viable, practical short-term procedure is what we seek. Any and all input appreciated. – IcePick

JWR Replies: You need to make a couple of inquiries: First, ask your well/pump man if your pump is 120 VAC or 220 VAC. If it is a 220 volt model, then you will need a special generator or you will have to retrofit with a 120 VAC pump. Next, you need to call several local electricians, and get them to put in competitive bids for installing a proper bypass breaker panel and cabling it to your generator. I’ve seen people describe improvised”Jerry rigged” male-to-male extension cord generator hookups, but these do not meet NEMA code and are potentially hazardous–both for you and the hapless power company linemen attempting to restore power to your community. Perhaps some readers have some recommendations on a particular switch/circuit breaker arrangement that is safe, meets code, and is not overly expensive.



Letter Re: Advice of Shotgun Shells and Shot Sizes

Dear Mr. Rawles:
To amplify on some of your points is a recent reply to a reader letter, here is some data; Number 4 [bird] shot is .13 inch in diameter.
Number 4 buckshot (BK) is .24 inch in diameter and weighs 20.5 grains. (one pound avoirdupois is equal to 7,000 grains, 437.5 grains is equivalent to one ounce.)
OO BK is .33 inch in diameter and weighs 53 grains.
We have several levels of power in buckshot loads. Lets look at 12 gauge 2-3/4 and 3 inch shells.

2-3/4 inch standard OO BK has 9 pellets at 1,325 feet per second (FPS) at the muzzle.
Low Recoil 2-3/4 inch Magnum OO BK has 9 pellets at 1,125 FPS at the muzzle.
2-3/4 inch Magnum OO BK has 12 pellets at 1,290 FPS.
3 inch Magnum OO BK has 15 pellets at 1,210 FPS.

2-3/4 inch number 4 BK has 27 pellets at 1,325 FPS.
3 inch number 4 BK has 41 pellets at 1,210 FPS.

These velocities may very a little from one brand to another.

The 3 inch Magnums offer more pellets per load, but they recoil very heavily and reduce the magazine capacity. If I lived in an apartment, a mobile home or my exterior walls were thin or if I had other people living in my home, I would consider using no. 4 or no. 6 bird shot to reduce over penetration. You could always have the first and second shot to be bird shot and the last two or three shells buckshot. If I lived in a rural area and thought I might need more range and penetration then use OO BK or OOO BK and possibly shotgun slugs. Use the shotgun with buckshot at 30 yards and under, use shotgun slugs at 50 yards and under. There are specially choked and rifled barreled shotguns that will extend these ranges but the usual short barreled and bead front sight riot shotgun will be doing very good to achieve consistent hits at these ranges.

I load my 12 ga. house gun with (5) 2-3/4 inch Magnum OO BK (12 pellets) in the magazine with a empty chamber, and 5 more of the same shells in the buttstock shell holder. Close by I have a ammo belt with 20 shot shells (bird shot,buckshot and slugs).

As a comparison – if fired from a rifle the 22 long rifle with a 40 grain lead round nose has a muzzle velocity of 1,255 to 1,280 FPS.
Each number 4 BK pellet will have a little less energy than a 22 long rifle bullet and each OO BK pellet will have a little more energy than the 22 long rifle bullet at the muzzle. Consider several people with veering levels of skill firing at a target with a 22 long rifle all at the same time, at close range this buckshot ammunition is very effective. Thank you for your work. – Campfire



Letter Re: A Company That Advertises on SurvivalBlog–and One That Ought To

Mr. Rawles:
Concerning an advertiser on your site. I have done business with George over at The Pre-1899 Specialist and have had outstanding results.
Without getting into specifics I bought from him and the Post Office managed to damage my order severely.
I notified George and as always received a very swift and positive response.
All was made right and I couldn’t be more satisfied. All was sent as advertised and in perfect (except for the gorillas at the USPS) working order.
The prices were great too. I am looking forward to doing more business with George in the future.

I also found Don Stott at Colorado Gold in your investment page. Don is very straightforward, professional and his prices were reasonable as of when I placed my order.
He isn’t a paid advertiser but maybe with a little encouragement he might consider it.
Keep up the good work.- Bucc.



Odds ‘n Sods:

Mike R. recommended this site about Ancient Turf Homes

   o o o

The high bid is currently $98 in the SurvivalBlog Bandwidth Fund benefit Auction. Please e-mail your bids before May 30th. Thanks to Kurt and Angie Wilson of Survival Enterprises for sponsoring this fund raiser!

   o o o

I just added another 30+ U.S. Army manuals to my mail order catalog.

   o o o

The Bush administration has released its “National Strategy for Pandemic Influenza Implementation Plan



The Memsahib’s Quote of the Day:

“The three most important things to look for when searching for a church home are doctrine, doctrine, and doctrine. If your main criteria are ‘programs’ and ‘outreach’ to this or that niche group, then in my opinion you are starting your search the wrong way.” – James Wesley, Rawles



David in Israel Re: “Peak Oil” and North American Oil Reserves

James:
I have a reply to SurvivalBlog reader John Z.’s comment on Untapped North American Oil Reserves What many non-geoligist/chemist oil commentators forget (likely are fighting a political and economic panic) when they feel safe in our huge North American reserves is the problem of either extraction or processing.
Most of the light sweet crude (easy to extract transport and crack) has already been discovered I do not know of any new light sweets (of any size) in over 10 years.
Heavy sour requires different less efficient chemistry in the refining process (much more sulfur) and the USA only has a few refineries set up for heavy sour such as that which comes from Venezuela.
Oil and tar sands and shales are much more difficult to extract than a nice pressurized well in the desert it requires huge water and natural gas resources (natural gas is exceedingly difficult to liquefy and transport very few new discoveries North America is near peak) as they are extracted with steam.
Other areas may be very difficult to reach. For example, the Arctic National Wildlife Refuge (ANWR) is a long way in, and only accessible in the winter over an ice road.
Much of what you see in the rise of light sweet is just dollar inflation against gold backed oil nations coupled with Chinese/Indian oil demand matching US demand of 10 years ago. America just got used to getting oil for almost free and built an economy with this assumption, name anything else (even bottled water) that you can buy a gallon of for so cheap right now. Even a non-gas (nuclear?) tar/sand/shale refinery would need many mighty rivers to supply the US and Canada’s needs at the current level and a minimum of 20 years of crash investment in the needed refining infrastructure, not a free ride like pressurized light sweet crude.
I have done some work for a Canadian iron ore concern and the seasonal nature of transport up north (iced waters and snow) and the price of new rails and dredged bays is massive.
I believe that Divine Providence will provide what is right for individuals, families, and even many communities but I fear for the USA as a nation. – David



Letter Re: Vulnerability of Fish to Asian Avian Flu?

Hello Jim,
We now know that cats and dogs can contract the [Asian] bird flu from ingesting contaminated/infected meat. What about fish in open ponds with infected ducks and geese contaminating the water? I have not heard anything about it, but wonder what might happen. Food for thought? – Mike in Michigan

JWR Replies: Answering that goes far beyond my expertise. Perhaps some of our readers who are doctors (preferably with an epidemiology background) would care to comment.



Letter Re: Folding Fighting/Utility Knife Recommendations?

Jim,
I have read a couple of the posts regarding folding knives. As my grandmother once told me, “A man is never fully dressed without a pocket knife.” I own several different knives for several different occasions. Depending on my needs and dress, I can carry a variety of knives from the simple folder dress knife to some big mamba jamba tactical folder that would slice an elephant in half. Right now, I have a Benchmade Mel Pardue folder in my pocket and an Emerson LaGriff around my neck. Some of the other brands I own are Cold Steel, Columbia River Knife & Tool (CRKT), Camillus CUDA, KaBar, Schrade, SOG, Buck, Spyderco and some custom work from Dawson Knives in Colorado and Peter Atwood (www.atwoodknives.com). I don’t know if these have a place in the folder knife category, but I count my Leatherman tools as well.
As I mentioned, each knife serves its own purpose. Whenever I wear a suit, my Buck penknife goes with. My normal carry is either my Atwood Goblin or Emerson LaGriff on the neck and a Spyderco Delica or Mel Pardue in the pocket. I like to carry my CUDA whenever I work at the pistol range (too bad you can’t find them around anymore).
I say all that to say this, I have never been more satisfied with a general pocket folder such as the SPYDERCO brand of knives. I have owned several through the years and currently have about five scattered throughout the house (I’ve never been able to keep knives in one place!). The Endura and Delica models are the most popular, and they have the half-n-half blade, straight edge and full serration available. Most models are all ambidextrous clip and they have a big thumbhole on the blade for easy opening. That hole makes opening a snap with gloves on in cold weather. The handles are mostly high quality plastic, but there are custom handles of stainless steel and even zytel and Micarta. The handles are ergonomic and fit the hand very well. Spyderco is very popular with Military, Law Enforcement, and Fire/Rescue personnel. They hold an edge and take wear and tear very well.
I also recently discovered Peter Atwood’s creations in a gun magazine some time back. Back where they feature new products were a couple of his handmade gadgets. I could not find anything comparable to the tools he made so I bought a few. Needless to say, I am impressed with his craftsmanship, attention to detail, and his friendly personality and warm customer service. He makes a really nifty pocket tool called a PryBaby. It is a sort of Jack-of-all-Trades nail pulling, pry-tool, flathead screwdriver, bottle opener, ear cleaner, whatever all rolled into one. He has other tools in the catalog, too. My other personal favorite is the Bug Out Bar and the Goblin Neck Knife. The B-O-B is a bigger pry tool used for bigger tasks. I recommend checking his web site and drooling over the neat products he carries. These may or may not be the products for you, but if you’re a gadget geek like me, then you will want one, too. Now, if you’ll excuse me, I have to dig through the seat cushions for a missing knife. Peace, – Matt C.



Odds ‘n Sods:

Today is the U.S. National Day of Prayer.

   o o o

There have already been some bids in the auction that just started yesterday for last remaining autographed copy of my novel “Patriots: Surviving the Coming Collapse” from the inventory at Survival Enterprises. The proceeds of the auction will benefit the SurvivalBlog bandwidth fund. The high bid is currently $50. Please e-mail your bids before May 30th. Thanks to Kurt and Angie Wilson of Survival Enterprises for sponsoring this fund raiser!

   o o o

The silver market remains very volatile. Yesterday, there was a huge $1.20 per ounce mid-day swing in spot silver in New York trading.

I think that silver anywhere below $16 per ounce is still a relative bargain. The short squeeze is on, and the spot silver price will likely zoom up near $20 per ounce before the summer trading doldrums set in. Buy on the dips!



Jim’s Quote of the Day:

"The last duty of a central banker is to tell the public the truth." – Alan Blinder, Vice Chairman of the Federal Reserve, on the PBS Nightly Business Report, in 1994