(Continued from Part 1. This concludes the article.)
THE BLUETTI 180P
This brings us to a real-world solution: the Bluetti AC180. This is a charge controller/battery bank/inverter in a single, elegant package. The heart of the AC180 is a bank of Lithium Iron batteries with an advertised life of 3,500 charge/discharge cycles and is warranted for five years. Integrated into the package is a charge controller capable of charging from a number of sources: 120 VAC house supply, car charger, or solar panels. It then is capable of supplying that stored power in a number of ways: various USB connections, a 12 volt DC cigarette lighter plug, a cordless charging capability, and four 120 VAC receptacles. The inverter necessary to convert the direct current stored in the batteries to the alternating current at the 120 VAC receptacles is integrated into the package as well.
One of the most useful features I have found is the control panel: it displays a number of important parameters including charging power in, discharge power out, and remaining percent of stored charge. The AC180 has a maximum output current of 15 amps at 120 VAC for a total maximum power discharge of 1800 watts (AC180: get it?) and a power over time from a full charge of 1152 watt hours. There are a number of useful programmable features built in; however, I am using the default settings that came with the device.Continue reading“My Experience with a Bluetti AC180 – Part 2, by Rick S.”
