Pat’s Product Reviews: Springfield Armory’s Range Officer 1911

I still remember the very first Springfield Armory 1911 .45 ACP pistol I ever owned. I believe the year was 1987, and I purchased a brand-new, still in the box, mil-spec Springfield Armory pistol. The gun was nicely finished with an evenly applied parkerized finish, with the overall appearance being that of a standard mil-spec gun in all regards. However, the darn thing wouldn’t feed any type of ammo – I reworked the feed ramp and throated the barrel and adjusted the extractor – rather then sending it back to Springfield Armory. Every now and then, a lemon slips through no matter who the gun manufacturer might be.

Since my first Springfield Armory 1911, I’ve owned quite a few samples from Springfield Armory over the years. There’s only been a few models that I haven’t had, one being the “Professional Light Rail” which comes from the Springfield Armory Custom Shop, and the other being the “Trophy Match.” There’s a few other Custom Shop models that are being made, but the two I really wanted to own are the above two. I’ve owned two of the TRP (Tactical Response Pistols) over the past couple of years – and they are as close as you can come to owning a custom 1911 from some of the high end custom shops.

The latest offering from Springfield Armory is the new “Range Officer” and let me tell you, it is an absolute best-buy in a 1911 if you are looking to get into the competition game.  The Range Officer weighs in at 40-oz with it’s match-grade 5″ barrel, with stainless steel match-grade barrel bushing. At first glance, the Range Officer looks like a “Loaded” 1911 from Springfield Armory, sans the ambidextrous safety, and with an adjustable rear sight. Don’t let the looks fool you!

The Range Officer comes with a flared and lowered ejection port, match-grade trigger and extended beaver tail grip safety, with an extended thumb safety. Okay, no big deal thus far, lots of 1911s come with these features today. However, let me tell you, Springfield Armory did an outstanding job putting this gun together – on my sample, and others I’ve examined, the slide to frame to barrel fit is perfectly executed. There is no wobble up and down, side to side or front to rear on the slide, frame and barrel – they are mated together with the best custom 1911s I’ve seen, bar none!

The fad for a few years has been for a full-lenth recoil guide instead of the mil-spec guide and plug – the Range Officer does away with the ful-length guide – I’m happy to see this, as most full-length guide rods only complicate disassembly. The Range Officer comes standard with two 7-rd magazines, as well as a holster and mag pouch, in a nice blue hard carrying case.

Ok, so what sets the Range Officer from many other run of the mill 1911s? Well, as already mentioned, the slide, frame and barrel fit are without peer in a production 1911, and the fit is the equal, if not better, than that seen on some custom 1911s costing thousands of dollars. Dave Williams, who runs the Springfield Armory Custom Shop, did an outstanding job coming up with the concept for this 1911. The Bo-Mar style fully adjustable rear sight is extremely rugged – I’ve owned some other 1911s with adjustable sights that wouldn’t hold a zero. The Springfield Armory fully adjustable rear sight isn’t gonna lose it’s zero under recoil. I’ve read on some websites and blogs, that many people complain that the rear sight on the Range Officer has too many sharp edges. I couldn’t find ’em on my sample – for the most part, the edges are ever so slight melted on the sight.

Trigger pull is important on a 1911, you can have a well-fitted gun, but if the trigger pull isn’t up-to-par, you are still gonna have a hard time hitting your target. The pull on my Range Officer sample is right at 4.5-lbs and super smooth, and extremely crisp. I was tempted to work the trigger over, but I know when to leave well enough alone. The pull feels a lot lighter than it actually is, and with it being so smooth and crisp, I didn’t think I could improve upon it very much.

The Range Officer also comes with a beautiful set of hard wood checkered grips, with the Springfield Armory logo embedded in the center. Again, I was tempted to remove the grips and put a pair of my “Code Zero” 1911 designed grips (from: www.mil-tac.com)  on the Range Officer – I elected to leave the handsome wood grips on the gun. The flat mainspring housing is plastic – and while I’ve never seen a plastic mainspring housing break, I’d like to see this part replaced with an all-steel housing – just my preference on a superbly built 1911! The mainspring housing is checkered for a secure hold, and there is also the Springfield Armory integral lock on the housing – if you want to use it to lock you gun from unauthorized use.

The beaver tail grip safety was timed perfectly, and there was no need to adjust it – when the Range Officer is gripped properly, the beaver tail releases the trigger when it’s pulled. There was a hint of play between the beaver tail grip safety and the frame – but nothing to complain about in the least. I would have liked it if Springfield Armory would have installed a slightly extended combat mag release – but that’s something that I will take care of later on – it’s a quick and fairly cheap expense to replace later on – just something I’d like to see on this well-equipped 1911.

The concept of the Range Officer is to help you get started in competing in the many different types of handgun shooting sports out there. The Range Officer is designed to be affordable, and it’s made to the same high-quality specs as the TRP and Trophy Match models. The Range Officer isn’t a simple do-all 1911 for competition – rather, it opens the door for you to get started into shooting pistol competition. You can send the gun off to the Springfield Armory Custom Shop if you want something added or changed – say perhaps, you want the front strap checker, instead of being bare. I’m simply gonna add some skate board friction tape to the front strap on my sample – it accomplishes what I want, and it’s a lot cheaper than having the front strap checkered and then having the frame re-parkerized.

With my aged eyes, I find all-black sights a bit hard to pick-up rapidly. You can take care of this by using a drop of gold nail polish in the center of the front sight – it helps you see the front sight, it really does! If you want to add a Tritium night sight you can do that to the dove-tailed front sight that comes on the gun. You can also swap out the fully adjustable rear sight for a fixed sight if you desire. Personally, I’m not a big fan of full adjustable rear sights on most guns. However, the Springfield Armory rear sight will be staying in place on my sample – it works fine for competition or carry. I know, I know, a lot of gun writers have written thousands of words about adjustable rear sights tearing-up their shirt, side or jacket lining – this Springfield Armory fully adjustable rear sight isn’t gonna do that with the proper holster. I guess if I had one minor complaint, it would be that I’d like to see a little more daylight (side-to-side) between the front and rear sight – the sight picture is “tight” – and again, you can remedy this yourself if you want by opening up the rear sight picture a little bit with a file. I can live with the sight picture now that I’ve added the gold nail polish to the front sight.

I knew before I even took the Range Officer out to shoot it, that it was gonna be a great shooter – you can usually tell when a 1911 is put together this tightly, and with such care, and premium parts. I had a good selection of Black Hills Ammunition, Buffalo Bore Ammunition (www.buffalobore.com) and Winchester (www.winchester.com) ammo on-hand for testing. I fired several hundred rounds of the Winchester USA white box 230 grain FMJ ammo through the Range Officer to break it in – it didn’t need it! The gun functioned 100% without a single malfunction of bobble of any sort. I also fired a couple boxes of Black Hills 230 grain FMJ through the gun – again, no problems. I used the Black Hills 230 grain JHP and 185 grain JHP ammo without any problems, as well as their +P version of their 185 grain JHP. And, the newest load from Black Hills, their 185 grain Barnes Tac-XP +P load. This is a solid copper bullet – no lead core – again, no problems.  From Buffalo Bore, I tried their 230 grain JHP and 185 grain JHP loads – both are +P rated – no problems to report. However, you knew you had a hot load on your hands with the Buffalo Bore +P loads – they aren’t made for whimps! Tim Sundles, who operates Buffalo Bore recommends that if you are gonna feed your 1911 a steady diet of his +P loads, that you install a heavier recoil spring – I concur!

In all, I fired close to 800-rds of ammo through my Range Officer sample, with nothing that even hinted at being a malfunction or any type. As I mentioned above, I knew this gun was gonna be a great shooter even befor I shot it. I don’t do the Ransom Rest thing – I leave that to other gun writers. I do most of my test and evaluation shooting standing on two-legs at 25-yards – which gives me real world results. For accuracy testing, I usually have a rolled-up sleeping bag that I put on the hood of my SUV and I use that as a rest. There were no  poor accuracy results with the Range Officer – my worst groups were in the 2.5″ range – if you can call those bad groups (I don’t!). I got those results with the Winchester USA brand 230 gr FMJ loads and the Buffalo Bore 185 grain JHP+P loads – and if anyone thinks those aren’t good accuracy results, then they don’t know what they’re talking about…I’ll take those kinds of groups all day long from a factory 1911.

The most accurate load from the Range Officer was the Black Hills 230 grain JHP load – I had several groups that were slightly bigger than an inch – that’s 5-shots at 25-yards, over a rest. I think I could have gotten some groups right at one inch or less, if I did my part better. However, I’ve been shooting a lot of 1911s the past month or so – more shooting than I normally do – and fatigue does tend to set in after a while. I honestly, with all my heart, believe the Range Officer can shoot an inch or under with the right loads. I had one group that just ever so slightly was above the one inch mark…and there’s a lot of custom 1911s that can’t shoot that well. As with any gun, experiment to see what ammo your gun likes the best, and then go with it, if it’s a good defensive load.

The purpose of the Springfield Armory Range Officer is to give the consumer a read-to-go, out-of-the-box, 1911 that can get you going into one of the many shooting competition sports – and the Range Officer has achieved that in my humble opinion. I no longer shoot in handgun competitions – haven’t done so for a lot of years. However, were I to get involved in pistol shooting once again, I’d reach for the Range Officer in a New York Minute. Is the Range Officer perfect? No, then again, no gun is. Can Springfield Armory improve or add onto the Range Officer? Yes, but that would add to the suggested retail price of $939. I would like to see Springfield Armory add the slightly extended combat mag release (as standard)…any other changes, the purchaser can have done by the Springfield Armory Custom Shop, depending upon your own taste and preforences. As the Range Officer comes out of the box, it can handle anything you ask of it. 

If you’re in the market for a really top-notch 1911, that can handle just about any chores you can throw at it, then take a real close look at the Springfield Armory Range Officer. It won’t let you down, on the competition field or on the mean streets – it’ll get the job done, I have no doubts. And, while the Range Officer was introduced in Nov. 2010, they are still in very short supply. I checked Gunbroker.com and Gunsamerica.com and there are very few samples up for auction on those web sites. I knew from the beginning, that the Range Officer wasn’t gonna go back to Springfield Armory – it’s a keeper – now I just have to figure out how I’m gonna come up with the funds to purchase this sample. My guy at the gun shop offered to buy it if I didn’t want it. And he doesn’t buy a lot of guns for himself, so that said a lot! If you want custom 1911 performance and accuracy from a production 1911, at avery affordable price, then get yourself a Springfield Armory Range Officer.

I can honestly say, that I’ve had a couple big-name custom 1911s that didn’t shoot nearly as accurately as the Range Officer does – and they cost thousands of dollars more than the Range Officer does. Whenever I run across a 1911 that is priced fairly (and the Range Officer most certainly is), is well-built, with quailty parts,  and is more accurate than I can be with it and 100% reliable – I’m snapping it up! The concept behind the Range Officer is that of a 1911 ready for competition. However, I believe it is equally well-suited as a carry gun for self-defense, survival, law enforcement duty, military SpecOps or anything else you can think of. It really is “that” good!



Letter Re: Survival and Special Needs Loved Ones

Dear Editor:
That piece that you posted in April about caring for special needs people or old people that have Alzheimer’s during TEOTWAWKI really blessed me a lot. I saw a lot of practical information and reasoning that can be applied to everyday life dealing with people like that. Things that can effect the relationship between you, the person you care for and others can be as simple as unfettered gossip. I soon learned after my Dad’s death that having conversations with my mother about our business things that were before and still needed to be kept under wraps were parroted uncensored to the masses which created a lot of strife for me and my family even after warning Mom in advance it was only to be mentioned between me and her. I was accused of spreading stories about people all over town when in fact I had only mentioned it to one person in what I was assured would be complete confidence, confidence that was soon destroyed and replaced with resentment and frustration not to mention mountains of embarrassment.  

My mothers mind isn’t what it used to be and she can’t keep any of our conversations to herself anymore. Not from me or anyone else for that matter. If we talk about something private she parrots it to the rest of the world even when I’ve made it clear it’s to be kept completely private. At first I doubted her loyalty and even question if she might be out to get me or something, but I began to understand that her old mind wasn’t reasoning things properly anymore and she doesn’t calculate the consequences of her loose lips or the ramifications that go along with it. If she even remembers it’s a secret, I’ve questioned that even. Once I learned that she was “secrecy incompetent”  and unable to keep information private, things have gotten much better. That doesn’t mean the problem doesn’t still strike from time to time, but I don’t have people calling me accusing me of spreading vicious rumors about them or finding out my personal business is everyone’s knowledge in the community. What’s even worse the information would get altered and got worse as it was passed along.  

In a TEOTWAWKI situation it could have caused a complete melt down even compromised everyone’s safety. Sometimes a death in an organization or family can cause The end of the world as we knew it to be. It changed my world, I know that.  

I still love mom as always, but when she got old and came under my care, I had to learn and adapt to her behavior. My mom wasn’t like that when she was younger, so at first it caught me off guard. People are going to get old even after a TEOTWAWKI event.  

The article you posted on the SurvivalBlog was of real value to me. Thanks!  – Chris J.



Two Letters Re: Securing Windows With Plywood The Fast And Easy Way

James:
I learned this very important lesson from a building contractor. On his hunting trips to Alaska he would send his supplies ahead of him in small (20′) shipping containers. After the first shipment of containers were raided by thieves he decided to add security to his supplies with a sheet of plywood over [the center of] the doors. Here is the trick that he used: the plywood was well-secured at close intervals with a variety of Phillips screws, Reed & Prince screws, square drive screws, Torx head screws, and long 5/16″ self- tapping [flathead] screws. Thieves might be armed with a battery powered drill and a #2 Phillips bit, but none of them ever carried a wide selection of bits and so they left his containers untouched and went in search of easier prey.

It also appears that none ever carried saws, or at least didn’t want to attract the attention that comes with sawing the plywood covering.

The result was that he had no more thefts after using a variety of fasteners.

Thieves are opportunists, and usually lazy enough to search for easy targets. – R.B.

 

JWR:
Approximately 25 years ago I built a simple swinging target to use for target practice. This target consists of two 1/4″ thick 8″ x 8″ mild steel plates. These plates have been used predominately for handguns and .22 caliber rifle bullets. On two occasions I fired two high power rifle shots at each of these plates. The first two rounds were 5.56 Ball ammo fired from a Mini-14 at 100 yards, resulting a 1/4 inch hole in each plate. Next two rounds were 30.06, 165 grain boat tail soft point fired from a Winchester Model 70 from 200 yards, same results another slightly bigger hole in each plate. I still have and use this target with two holes in each plate. And since that day I absolutely know the penetrating ability of my standard loads.

I would hope you pass on this tidbit to your readers. Test any and all materials for bullet resistance, if that will be it’s primary function.

Just a thought- might be interesting to see how many field expedient types of bulletproof materials readers have come up with. – Mike H.



Economics and Investing:

Steven M. suggested: Three financial funnel clouds ahead Commentary: Fighting ‘F5’ financial disasters with ETFs

United States of Denial (James West)

John R. suggested a piece by Arnold Bock: Get Ready to be Financially Conscripted

Katie Benner: China’s Debt Bomb

From The Daily Bell: Greece: Frazzled Eurocrats Play for Time

Items from The Economatrix:

The Five Biggest Threats to US Economy

Celente Predicts Gold Standard Won’t Save US Economy

Consumers’ Confidence Down in June on Job Worries



Odds ‘n Sods:

The Day the Law Left Town: Texas City Sends Police Packing to Cut Costs; Sheriff Plays Catch as Catch Can. (Thanks to G.G. for the link.)

   o o o

I heard about a small company that makes inexpensive target retrieval systems, for shooting ranges: Rogue Six. If you know anyone that operates a small public or police range, please forward the link.

   o o o

Directive 21 (one of our advertisers) has anounced a special that runs from July 1st to July 15th: For every purchase of a Berkey Water Purification System on their site, you will receive a free Pelican Model 2360 LED Flashlight, a $40 value.

   o o o

Reese spotted this: Global Agriculture Supply Keeps Worsening

   o o o

Sometimes, progress on Open Carry requires the courts: Suit seeks to halt harassment of citizens carrying firearms in Wheeling. JWR Adds: As I’ve written before: Much like a muscle that atrophies with disuse, any right that goes unexercised for many years devolves into a privilege, and eventually can even be redefined as a crime.



Jim’s Quote of the Day:

“If investors chose not to purchase a sufficient volume of new Treasury securities, the United States would be required to pay the principal on maturing debt, and not merely the interest, out of available cash. Yet the Treasury would be unable to make these principal payments without the continued confidence of market participants willing to buy new Treasury securities.”  – Treasury Secretary Tim Geithner in a letter to Sen. Jim DeMint regarding raising the Federal debt ceiling. Translation: “The U.S. financial system is an enormous Ponzi scheme.”



Note from JWR:

Today we present another entry for Round 35 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:

First Prize: A.) A course certificate from onPoint Tactical. This certificate will be for the prize winner’s choice of three-day civilian courses. (Excluding those restricted for military or government teams.) Three day onPoint courses normally cost $795, and B.) Two cases of Alpine Aire freeze dried assorted entrees in #10 cans, courtesy of Ready Made Resources. (A $400 value.) C.) A 9-Tray Excalibur Food Dehydrator from Safecastle.com (a $275 value), D.) A $250 gift certificate from Sunflower Ammo , and E.) An M17 medical kit from JRH Enterprises (a $179.95 value).

Second Prize: A.) A Glock form factor SIRT laser training pistol. It is a $439 value courtesy of Next Level Training. B.) A “grab bag” of preparedness gear and books from Jim’s Amazing Secret Bunker of Redundant Redundancy (JASBORR) with a retail value of at least $300, C.) A $250 gift card from Emergency Essentials, and D.) two cases of Meals, Ready to Eat (MREs), courtesy of CampingSurvival.com (a $180 value).

Third Prize: A.) A Royal Berkey water filter, courtesy of Directive 21. (This filter system is a $275 value.) , and B.) Expanded sets of both washable feminine pads and liners, donated by Naturally Cozy. This is a $185 retail value.

Round 35 ends on July 31st, so get busy writing and e-mail us your entry. Remember that articles that relate practical “how to” skills for survival have an advantage in the judging.



Prepping From the Ground Up, by N.V.

As a newcomer to the survivalist game (and by newcomer, I mean that I haven’t planned for anything bad to happen in the future except for my daughter reaching dating age), I thought it would be interesting to detail how I came to be reading this web site at this point in my life and the steps I have taken so far as a “virgin” survivalist.
 
I became interested in it recently due to several factors. The first is I have always found literature regarding end of the world scenarios to be fascinating.  I have read everything from On the Beach to The Last Ship to science fiction stories about the end of times such as the Daybreak series. Second, while I am not politically active, I am politically observant, and there are telling signs in the global economy and in politics within the United States that are quite troubling.  The third, and perhaps most important, is that I am a planner and worrier by nature (both at home, and as my job) and I found myself thinking of various scenarios that could happen.  I then realized that, while many bad things could happen, I (and my family) was really prepared for none of it. Starting out I didn’t even know how much I didn’t know.
 
The final straw was my impending 40th birthday and the slight mid-life crisis I was experiencing.  As I don’t like fast cars and still like my wife (which rules out a girlfriend), I was in search of a hobby to occupy my time, and seeing the intersection of the necessity of survival preparation and my interest in scenarios for TEOTWAWKI I decided it was the perfect match.
 
My first baby steps towards worst case scenario planning involved reading.  As a voracious reader, I found SurvivalBlog.com, and have ordered numerous books on the subject.  After having read the books, I then performed a Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis.  As recently mentioned in SurvivalBlog, it is a method to analyze a certain subject (in this case my ability to survive given scenarios) to understand where you are at internally (strengths and weaknesses) and to predict what might happen externally (threats and opportunities).
 
My SWOT analysis for strengths was somewhat limited, as might be expected.  I listed overall health (I exercise 5 or 6 days / week, doing both cardio and weights), general intelligence (I have an engineering degree), available resources (while not rich I have a pretty good job and some disposable income) and childhood (I grew up on a farm, hunting, fishing and being outside).
 
My weakness list was obviously very long.  While I consider myself pretty healthy, I have an eye disease requiring the use of custom made hard contacts, as well as asthma.  I had no specific survival skills, no weapons, no tools, no medical training and no contingency plans.  One of my biggest weaknesses (as I saw it) was a general lack of useful knowledge on how to survive when the balloon goes up.  I mean, I can buy lots of stuff, but all that stuff can be taken away by somebody who is bigger / faster / better armed than me.  If I have a desirable skill then I would be “marketable” as they say in today’s world.
 
One of main opportunities I listed my older brother.  A “prepper” himself, he is a licensed gun dealer and owns a small business selling survivalist equipment.  Many of the items I would need he can obtain for wholesale pricing, and he is willing to sell them to me without any mark up.  Another opportunity that I saw was that my asthma was well under control, allowing me to take my medicine on alternate days and thus allowing me to create some safety stock.
 
For threats, I listed my proximity to a major city (I live about 40 miles from downtown Detroit), and my travel schedule (I am on the road for work about one week / month, and overseas twice / year).
 
I established a priority list as follows based on my current finances and knowledge.  I have decided first to concentrate on short term situations (natural disasters, terrorist attacks), and then once my short term needs are settled then begin planning for some longer term potentials (it didn’t make much sense to me to buy a grain mill when I didn’t have any food socked away in the first place to eat while waiting for my wheat to grow).  The list is as follows:

  • Survivalist resources (books)
  • Water purification
  • Medicine / contact lenses
  • Fire starting tools
  • First Aid kid
  • Food (short term/backpacking)
  • Miscellaneous tools (knives, compass, rain gear, etc)
  • Weapons / ammo
  • Food storage / preparation
  • Power generation / storage
  • Silver

To date I have purchased supplies for two different methods of water purification (tablets and filter straws) and three methods of starting fires.  Thanks to my wife’s obsession with buying bottled water (and then drinking diet coke instead) I have about 30 gallons of bottled water available as well (don’t ask, I don’t understand it either).  I have purchased supplies to start my own (somewhat limited) first aid kit. As mentioned I have begun alternating the days on which I take my medicine and have ordered extra contacts for an emergency reserve.  I have started bug out bags for me and my family, with various items (in addition to the ones above), and also including a hatchet, knife, cable saw, Gerber multi-tool, rope, energy bars, compass, fishing line, emergency blanket, and spare clothes) and stored 10 gallons of gasoline. (This is a trifling quantity, but the extra 150 miles could get me some places that other people might not make it to.
 
The next steps for me (in the next three months) are to begin the research and purchase of weapons and food storage / water filtration, and to begin categorizing the supplies and budget I will need for longer term situations.  Based on the research on have seen so far I am planning on purchasing a Remington 870, a Ruger 10/22 (the rimfire rifle from my youth), and some type of pistol (I have not yet determined the type yet.)  To help with my research I have scheduled firing sessions with my brother, where I will test an AR-15, a .308 battle rifle, and various pistols.   If I have additional money available I will later go big for some type of assault weapon.
 
I also want to do some research into the area I am in (while somewhat close to Detroit, I am surrounded by lakes and farmlands) to determine if I should plan on staying in my current house, or if I should head somewhere else if the stuff hits the fan.  I will also get a minimum of 30 days of food on hand for my family and me.
 
In the long term (six months to a year) my main goal is to become better prepared for long term survival situations.  This will require upgrading my house or finding a suitable bug out location, obtaining more “bean, bullets and band-aids” and developing a skill that would be essential in a post-apocalyptic scenario. I am smart enough to realize that I don’t everything that I will need to know or to own everything I will need to own to survive if something major happens.  Therefore the best chance for me and my family is to somehow be taken on by a more organized group by having a skill that would be desirable.  After some research the main thing I am considering is blacksmithing (every book I read mentions the need for these) and at 225 pounds I am probably big enough to do it.
 
My biggest open question is what to do with my pop up camper. While at first the idea of using a pop up camper in the event of an emergency seems ludicrous (and maybe it is), if I do have to bug out I will likely (hopefully) be driving, and if I am driving why would I not take a self contained, waterproof, heated tent, which allows me to carry more gear farther (including mounts for bicycles)?  It has the added advantage in that I already keep all of my essential supplies locked in the camper, so theoretically we can hook up and be on the road in a matter of minutes. 
 
Of course, a pop up camper limits where you can go (no off road routes would be possible), is totally indefensible, and supplies to live without it (tents, sleeping bags, etc) are still required but for my given scenario (short term emergencies) I am currently planning on utilizing it.
 
In all just thinking about things and taking baby-steps so far has made me feel a little better as far as my preparation and the next steps required.



Letter Re: Securing Windows With Plywood The Fast And Easy Way

Sir:
I’ve been researching ways to secure windows in a SHTF scenario and it seems that one of the best ways to do this is by screwing pre-cut sheets of plywood to the window frame.  This will take many screws and it will leave screw holes in your window frame if/when it comes time to take down the plywood.  It also takes precious time to put a lot of screws in even with a powered screwdriver and depending on the size of the window, you might need several people to hold the plywood in place while you put the screws in.

The French cleat method involves securing a strip of wood with a 45 degree bevel to the wall, and then securing an opposing beveled strip on the back the object you want to hang.  This is often used to hang cabinets and is very strong.  If you add French cleats to to top (and to the bottom if you want it really strong) of your plywood and windows, one person should be able to hang each piece of plywood very quickly.  If you build it into the existing trim, provided it is strong enough wood, it will be almost undetectable unless you are looking specifically for it. 

When the SHTF, just grab your plywood with the opposing 45 degree bevel and hang it.  Maybe put one of two screws in when you have time if it makes you feel better. This system should save a lot of time and window frames for people that need to G.O.O.D. or hunker down when a natural disaster such as a hurricane or tornado is approaching and they want to save their windows.  It is also a good addition for security since the connection is very strong, but you’ll still have to add screws since the plywood can be literally lifted off the French cleat and set aside, providing access to the window. 

You can also add another French cleat to the bottom of the plywood and window for additional strength and just have screws on the sides. This method can also be used with any material you can securely attach a cleat to if you want to use something other than plywood. 

1/4″ metal window covers with a welded cleat would be able to stop most rounds and therefore offer the most security.  Since the connection is so strong, you might be able to attach a few sandbags to your plywood if needed.  I do not know exactly how much weight this will hold (most sites just say “very heavy”) and it depends on the materials you use anyway so use common sense if you decide to use this method. – Jonathan J.

JWR Replies: The weight of sheet steel adds up in hurry. Here is a useful quote from my novel Patriots:

Originally, Dan had suggested either one-inch thick mild plate steel, or half-inch thick hardened steel to go over the windows and doors. That was before he realized how much they would weigh. When he got back to Chicago, he consulted one of his books of engineering tables and found the formula for figuring the weight of plate steel: Length (in inches) x width (inches) x thickness (inches) x .2560 = weight (pounds)

Thus, for instance, a 1″ thick piece of of plate steel that measures 36″ x 36″ weighs at least 331 pounds. That is what you would need to stop .308 or .30-06 AP. Even .308 ball with a 90-degree hit will go right through 1/4″ steel plate if it isn’t hardened.

After I first posted this, Reader G.C. added this clarification: “The math presented is for a 1″ thick 36″ x 36″ plate, though most mil spec sheets will suggest that plate will weigh in between 360 and 370 lbs. (I came up with 367.56 lbs from the spec sheet I used.”

The weight of 1″ plate steel (or several stacked layers to achieve comparable thickness) requires special handling precautions. Safety first when handling plate steel, folks. Some of the following might sound slightly paranoid, but I’ve “been there, don’t that” and have accumulated a couple of little scars:

  • Get plenty of assistance.
  • Over-engineer all attachment points.
  • Be sure that everyone wears safety (steel toe) boots.
  • Don’t use flimsy or tippy supports. Use an engine hoist for pieces that weigh more than 120 pounds. Lift with youg legs, not your back.
  • Measure twice and cut once.
  • Have fire extinguishers handy.
  • If at all possible, do all your cutting and welding before you lift.
  • Keep kids and pets at a safe distance.
  • Move slowly and deliberately, and don’t lose control of a plate. Remember… acceleration: “32 feet per second…”
  • Have a cell phone close at hand. (And if you are out in the boonies beyond cellular coverage, then be extra careful.)
  • Have some bandages, a CAT, several packets of Quik-Clot (or Celox), and Betadine close at hand.
  • Put car keys in their slots so that vehicles are ready to go, if needed.
  • Most importantly: There should only be one person in charge. Thoroughly talk through the expected actions of everyone on your crew before you lift anything. (Namely: A.) Who will hold what, where, and how, and for how long, B.) Exactly what maneuvers/transitions will be used, and C.) What to do if X, Y, or Z happens.

I wish you success and safety with your project!



Guest Article: The Screaming Fundamentals for Owning Gold and Silver, by Chris Martenson

This report lays out an investment thesis for gold and one for silver.  Various factors lead me to conclude that gold is one investment that you can park for the next ten or twenty years, confident that it will perform well. My timing and logic for both entering and finally exiting gold (and silver) as investments are laid out in the full report.

The punch line is this: Gold and silver are not (yet) in bubble territory, and large gains remain, especially if monetary, fiscal, and fundamental supply-and-demand trends remain in play.

Introduction

In 2001, as the painful end of the long stock bull market finally seeped into my consciousness, I began to grow quite concerned about my traditional stock and bond holdings. Other than a house with 27 years left on a 30 year mortgage, these holdings represented 100% of my investing portfolio. So I dug into the economic data to see what I could discover. What I found shocked me. It’s all in the Crash Course in both video and book form, so I won’t go into that data here.

By 2002, I had investigated enough about our monetary, economic, and political systems that I decided that holding gold and silver would be a very good idea, poured 50% of my liquid net worth into precious metals, and sat back and watched.

Since then, my appreciation for and understanding of the role of gold as a monetary asset and silver as an indispensable industrial metal have deepened considerably.

Investing in gold and silver is still a good idea. Here’s why.

Why own gold and silver?

The reasons to hold gold and silver, and I mean physical gold and silver, are pretty straightforward. So let’s begin with the primary reasons to own gold.

  1. To protect against monetary recklessness
  2. As insulation against fiscal foolishness
  3. As insurance against the possibility of a major calamity in the banking/financial system
  4. For the embedded ‘option value’ that will pay out if and when gold is remonetized

By ‘monetary recklessness,’ I mean the creation of money out of thin air and the application of more liquidity than the productive economy actually needs. The central banks of the world have been doing this for decades, not just since the onset of the great financial crisis. In gold terms, the supply of above-ground gold is growing at roughly 3% per year, while money supply has been growing at nearly three times that yearly rate since 1980.

See this chart from the St. Louis Fed.

Now this is admittedly an unfair view, because the economy has been growing, too, but money and credit growth have handily outpaced even the upwardly distorted GDP measurements by a wide margin.  As the economy stagnates under this too-large debt load while the credit system continues to operate as if perpetual expansion were possible, look for all the resulting extra dollars to show up in prices of goods and services.    

Real interest rates are deeply negative (meaning that the rate of inflation is higher than Treasury bond yields). This is a forced, manipulated outcome courtesy of central banks that are buying bonds with thin-air money. Historically, periods of negative real interest rates are nearly always associated with outsized returns for commodities, especially precious metals. If and when real interest rates turn positive, I will reconsider my holdings in gold and silver, but not until then. That is as close to an absolute requirement as I have in this business.

Monetary policies across the developed world remain as accommodating as they’ve ever been. Even Greenspan’s 1% blow-out special in 2003 was not as steeply negative in real terms as what Bernanke has recently engineered. But it is the highly aggressive and ‘alternative’ use of the Federal Reserve balance sheet to prop up insolvent banks and to sop up extra Treasury debt that really has me worried. There seems to be no way to end these ever-expanding programs, and they seem to have become a permanent feature of the economic and financial landscape.  In Europe, the equivalent would be the sovereign debt now found on the European Central Bank (ECB) balance sheet.  

Federal deficits are seemingly out of control and are now stuck in the -$1.5 trillion range. Massive deficit spending has always been inflationary, and inflation is usually gold/silver friendly. Although not always, mind you, as the correlation is not strong, especially during mild inflation (less than 5%). Note, for example, that gold fell from its high in 1980 all the way to its low in 1998, an 18 year period with plenty of mild inflation along the way. Sooner or later I expect extraordinary budget deficits to translate into extraordinary inflation.

Reason #3, insurance against a major calamity in the banking system, is an important part of my rationale for holding gold. I’m not referring to “paper gold” either, which includes the various tradable vehicles (like the “GLD” ETF) that you can buy like stocks through your broker. I’m talking about physical gold and silver because of their unusual ability to sit outside of the banking/monetary system and act as monetary assets.

Literally everything else financial, including your paper US money, is simultaneously somebody else’s liability, but gold and silver are not. They are simply, boringly, just assets. This is a highly desirable characteristic that is not easily replicated.

Should the banking system suffer a systemic breakdown, to which I ascribe a reasonably high probability of greater than 1-in-4 over the next 5 years, I expect banks to close for some period of time. Whether it’s 2 weeks or 6 months is unimportant; no matter the length of time, I’d prefer to be holding gold than bank deposits.

During a banking holiday, your money will be frozen and left just sitting there, even as everything priced in money (especially imported items) rocket up in price. By the time your money is again available to you, you may find that a large portion of it has been looted by the effects of a collapsing currency. How do you avoid this? Easy; keep some ‘money’ out of the system to spend during an emergency. I always advocate three months of living expenses in cash, but you owe it to yourself to have gold and silver in your possession as well.

The final reason for holding gold, because it may be remonetized, is actually a very big draw for me. While the probability of this coming to pass may be low, the rewards would be very high.

Here are some numbers:  The total amount of ‘official gold,’ or that held by central banks around the world, is 30,684 tonnes, or 987 million troy ounces (MOz). In 2008 the total amount of money stock in the world was roughly $60 trillion.

If the world wanted 100% gold backing of all existing money, then the implied price for an ounce of gold is ($60T/987MOz) = $60,790 per troy ounce.

Clearly that’s a silly number (or is it?), but even a 10% partial backing of money yields $6,000 per ounce. The point here is not to bandy about outlandish numbers, but merely to point out that unless a great deal of the world’s money stock is destroyed somehow, or a lot more official gold is bought from the market and placed into official hands, backing even a fraction of the world’s money supply by gold will result in a far higher number than today’s ~$1,500/Oz.

The Difference Between Silver and Gold

Often people ask me if I hold “goldandsilver” as if it were one word. I do own both, but for almost entirely different reasons. Gold, to me, is a monetary substance. It has money-like qualities and it has been used as money by diverse cultures throughout history. I expect that to continue.

There is a chance, growing by the week, that gold will be remonetized on the international stage due to a failure of the current all-fiat regime. If or when the fiat regime fails, there will have to be some form of replacement, and the only one that we know works for sure is a gold standard. Therefore, a renewed gold standard has the best chance of being the ‘new’ system selected during the next bout of difficulties.

Silver is an industrial metal with a host of enviable and irreplaceable attributes. It is the most conductive metal known, and therefore it is widely used in the electronics industry. It is used to plate critical bearings in jet engines and as an antimicrobial additive to everything from wall paints to clothing fibers. In nearly all of these uses, plus a thousand others, it is used in such vanishingly small quantities that it is hardly worth recovering at the end of the product lifecycle — and often isn’t.

Because of this dispersion effect, above-ground silver is actually at something of a historical low point. When silver was used primarily for monetary and ornamentation purposes, the amount of above-ground, refined silver grew with every passing year. After industrial uses cropped up, that trend reversed, and today there are perhaps 1 billion ounces above ground, when in 1980 there were roughly 4 billion ounces.  

Because of this consumption dynamic,  it’s entirely possible that over the next twenty years not one single net new ounce of above ground silver will be added to inventories, while in contrast, a few billion ounces of gold will be added.

I hold gold as a monetary metal. I own silver because of its residual monetary qualities, but more importantly because I believe it will continue to be in demand for industrial uses for a very long time, and it will become a scarce and rare item.

Scarcity

If we cast our minds forward ten years and think about a world with oil costing 2x to maybe 8x more than today, we have to ask how many of our currently-operating gold and silver mines, or the base metal mines from which gold and silver are by-products, will still be in operation, and how many will close because their energy costs will have exceeded their marginal economic benefits.

After just 100 years of modern, machine-powered mining, nearly all of the good ores are gone. By the time you are reading stories like this next one, you should be thinking, ‘Why are they going to all that trouble unless that’s the best option left?’

South African Miners Dig Deeper to Extend Gold Veins’ Life Spans

Feb. 17, 2011

JOHANNESBURG–With few new gold strikes around the world that can be turned into profitable mines, South Africa’s gold miners are planning to dig deeper than ever before to get access to rich veins.

The plans raise questions about how to safely and profitably mine several miles below the surface. Success would mean overcoming problems such as possible rock falls, flooding and ventilation challenges and designing technology to overcome the threats.

Mark Cutifani, chief executive officer of AngloGold Ashanti Ltd., has a picture in his office of himself at one of the deepest points in Africa, roughly 4,000 meters, or 13,200 feet, down in the company’s Mponeng mine south of Johannesburg. Mr. Cutifani sees no reason why Mponeng, already the deepest mining complex in the world, shouldn’t in time operate an additional 3,000-plus feet deeper.

“The most critical challenges for all of us in South Africa are depths and depletion of reserves,” Mr. Cutifani said in an interview.

The above article is just a different version of the story that led to the Deepwater Horizon incident.  By the time exceptional engineering challenges are being pondered to scrape a little deeper, it tells the alert observer everything they need to know about where we are in the depletion cycle.  We are closer to the end than the beginning.

We are at the point in history where we can easily look forward and make the case for declining per capita production of numerous important elements just on the basis of constantly falling ore purities and gold and silver fit into that category rather handily. Depletion of reserves is a very real dynamic and it is not one that future generations will have to worry about; it is one with which people alive today will have to come to terms.

The issue of Peak Oil only exacerbates the reserve depletion dynamic by adding steadily rising energy input costs to mix. Should oil get to the point of actual scarcity where we have to ration by something other than price, then we must ask where operating marginal mines fits into the priority list. Not very high would be my guess.

Supply and Demand – Gold

Not surprisingly, the high prices for gold and silver have stimulated quite a bit of exploration and new mine production. With over decade of steadily rising prices, there has been ample time to bring on new production. Which leads to a real surprise: in the case of gold, relatively little incremental mine production has occurred.

The analytical firm Standard Chartered has calculated  a rather subdued 3.6% gold production growth over the next five years:

Most market commentary on gold centres on the direction of US dollar movements or inflation/deflation issues – we go beyond this to examine future mine supply, which we regard as an equally important driver. In our study of 375 global gold mines and projects, we note that after 10 years of a bull market, the gold mining industry has done little to bring on new supply. Our base-case scenario puts gold production growth at only 3.6% CAGR over the next five years.

(Source – Standard Chartered)

Of course none of this is actually surprising to anyone who understands where we are in the depletion cycle but it’s probably quite a shock to many an economist. The quoted report goes on to calculate that existing projects just coming on-line need an average gold price of $1,400 to justify the capital costs while greenfield, or brand-new, projects require a gold price of $2,000 an ounce.

This enormous increase in required gold prices to justify the investment is precisely the same dynamic that we are seeing with every other depleting resource: energy costs run smack-dab into declining ore yields to produce an exponential increase in operating costs. And it’s not as simple as the fuel that goes into the Caterpillar D-9s; it’s the embodied energy in the steel and all the other energy-intensive mining components all along the entire supply chain.

Just as is the case with oil shales that always seem to need an oil price $10 higher than whatever it currently is to break even, the law of receding horizons (where rising input costs constantly place a resource just out of economic reach) will prevent many an interesting, but dilute, ore body from being developed. Given declining net energy, that’s forever as far as I am concerned.

The punch line of the Standard Chartered gold report is that they think $5,000 gold is a realistic target and go on to note the most important shift in gold accumulation of the past 30 years:

The limited new supply comes at a time when central banks have turned from being net sellers to significant net buyers of gold. The result, in our view, will be a gold market in deficit, even assuming flat growth in demand.

With the supply-demand balance so out of kilter, we see the gold price potentially going to US$5,000/oz. (Source)

The emergence of central banks being net acquirers of gold is actually a pretty big deal. Over the past few decades central banks have been actively reducing their gold holdings preferring paper assets over the ‘barbarous relic.’ Famously, Canada and Switzerland vastly reduced their official gold holdings during this period, a decision that many citizens of those countries have openly and actively questioned.

The World Gold Council out of the UK is the primary firm that aggregates and reports on gold supply and demand statistics. Their most recent data on official (i.e. central bank) gold holdings shows that in 2008 they switched from being net sellers to being net buyers. (Source)

Note that the 2009 data is lowered by slightly more than 450 tonnes in this chart to remove the one-time announcement by China that it had secretly acquired 454 tonnes over the prior six years, so this data may differ from other representations you might see. I thought it best to remove that blip from the data. Also the data for 2011 is for the first four months only, so we might expect 2011 to be a record-setter if the current pace continues.

Overall, world supply and demand are a bit out of alignment right now with supply increasing by 2% last year and non-official demand increasing by 10%.

The summary of the fundamental analysis is that with mine production seriously lagging the price increases for gold, coupled to increased central bank and investment demand, we have set the stage for some hefty prices increases irrespective of any fiscal or monetary shenanigans.

However, once we put those back into the mix, I forecast a quite volatile but upwardly sloping price for gold over the coming years. Possibly a very steep upward slope at points.

Supply and Demand – Silver

Silver demand is growing by double-digit percentages, being led primarily by industrial uses and investment demand. The Silver Institute does a fine job of tracking and reporting on these matters.

First, Demand:

Total fabrication demand grew by 12.8 percent to a 10-year high of 878.8 Moz in 2010; this surge was led by the industrial demand category. Last year, silver’s use in industrial applications grew by 20.7 percent to 487.4 Moz, nearly recovering all the recession-induced losses in 2009, and is now seeing pronounced advances in 2011.

Jewelry posted a gain of 5.1 percent, the first substantial rise since 2003, primarily due to strong GDP gains in emerging markets and the industrialized world’s improving economic picture. Photography fell by 6.6 Moz, realizing its smallest loss in nine years, as medical centers deferred conversion to digital systems. Silverware demand fell to 50.3 Moz from 58.2 Moz in 2009, essentially due to lower demand in India. (Source)

Now, Supply:

Silver Production 2010

Silver mine production rose by 2.5 percent to 735.9 Moz in 2010 aided by new projects in Mexico and Argentina. Gains came from primary silver mines and as a by-product of lead/zinc mining activity, whereas silver volumes produced as a by-product of gold fell 4 percent last year.

Mexico eclipsed Peru as the world’s largest silver producing country in 2010, and Peru is followed by China, Australia and Chile. Global primary silver supply recorded a 5 percent increase to account for 30 percent of total mine production in 2010.

(See chart: Demand and Supply in 2010)

Again, we are comparing double digit demand increases against low single digit supply increases.  After a decade of rather dramatic price increases for silver, the alert observer should be asking exactly why this is the case.

In table form, we can clearly see that the silver balance for the world requires both dis-hoarding from government stockpiles and from the recycling of scrap silver. That is, shortfalls from mining have to be made up from above ground stocks.

There’s only so long that such an imbalance can continue before the shortfalls require much higher prices to cool off demand.

One of the reasons that I originally invested quite heavily in silver is precisely because I came to the conclusion that the price was far too low, artificially so, and that it would therefore be a great investment. So far so good.

Given the aforementioned fundamentals, I project that prices for the precious metals will be many multiples higher – in today’s dollar terms – by the end of the decade.

Part II of this report: How to Play The Greatest Gold & Silver Bull Market Of Our Lifetime (by subscription) delves into the specifics of how much of your net worth to invest and in what forms, what price targets gold and silver are likely to reach, and what indicators to look for that will indicate it’s time to sell out of your precious metal investments.



Economics and Investing:

F.J. suggested the tax infornmation from Kiplinger’s, for helping to select reterat locales: Retiree Tax Heavens (and Hells)

Reuter’s reports: S&P to deeply cut U.S. ratings if debt payment missed

Kostas sent this: Greece faces general strike, more cuts planned. This article includes a quote from deputy prime minister, Theodoros Pangalos: “A return to the drachma would mean that the next day banks would be surrounded by people trying to get their money out. The army would have to use tanks to protect [the banks] because there wouldn’t be enough police to do it.”

Alexander in Germany flagged this one for us: ‘The German Government Will Pay Up’. Here is a omimous quote: “Sooner or later, this much is certain, the system will be blown apart by political and economic factors. And, unfortunately, there is a great danger that, when this happens, it is not only the euro that will fall apart, but also the entire EU.”

Sig Kriegsman suggested this blog post by Bruce Krasting: Obama, Democrats, Republicans AND Bernanke All in a Bind – What they will do and when

Economist Carmen Reinhart Shares Her Grim Outlook for the U.S. Economy

Michael Pollaro, in Forbes: Monetary Watch June 2011, Inflation prospects post QE II

Items from The Economatrix:

Enter The Dragon “To Save The Euro”

Consumer Spending Breaks 10-Month Rising Streak

Economy Expected to Have Major Slide

Drivers Catch a Break as Gasoline Prices Fall

National Debt Time Bomb Ticks Toward Crisis

Greek Army Threatens Military Coup; Sparks Fear of Military Uprisings and Civil War Breaking Out All Over Europe



Odds ‘n Sods:

Several readers mentioned this: President Obama’s Executive Order 13575: Rural Council.

   o o o

Veteran SurvivalBlog contributor K.T. wrote to mention that someone recently scanned and posted Jeff Cooper’s article on Defensive Architecture from the first year of P.S. Newsletter. Note that, to the best of my knowledge, this was posted in violation of copyright. I believe that the copyright shifted from Mel Tappan to his widow Nancy Tappan, then to Karl Hess (who subsequently renamed the newsletter Survival Tomorrow), and then presumably to Karl’s heirs and assigns when he passed away. BTW, I wish that someone would republish the first three years of P.S. Newsletter. My original blue, yellow, and pink binder copies of P.S. Newsletter (that I bought from Bill Pier back in the mid-1980s when he sold licensed reprints) are some of my prized possessions.

   o o o

Senegal deploys extra troops as power cuts enrage. (Thanks to Steven M. for the link.)

   o o o

Asian ‘megapest’ is chomping up US orchards

   o o o

Pierre M. sent us a news article to file under “Legal Absurdities”: Vet Checks Wrong Box, Faces Charges



Jim’s Quote of the Day:

Bryan Prescot:  “When all you have is a hammer, every problem looks like a nail.”

Agent Alex Marlow:  “Conversely, sir, when you have a nail, you can bang at it all day with a screwdriver, a shoe or your hand and get nothing except hurt.  Whereas one good blow with the hammer makes the problem go away for good.”  – From Do Unto Others by Michael Z. Williamson. (Mass market paperback edition available August, 2011 from Baen Books.)



Note from JWR:

Today we present another entry for Round 35 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:

First Prize: A.) A course certificate from onPoint Tactical. This certificate will be for the prize winner’s choice of three-day civilian courses. (Excluding those restricted for military or government teams.) Three day onPoint courses normally cost $795, and B.) Two cases of Alpine Aire freeze dried assorted entrees in #10 cans, courtesy of Ready Made Resources. (A $400 value.) C.) A 9-Tray Excalibur Food Dehydrator from Safecastle.com (a $275 value), D.) A $250 gift certificate from Sunflower Ammo , and E.) An M17 medical kit from JRH Enterprises (a $179.95 value).

Second Prize: A.) A Glock form factor SIRT laser training pistol. It is a $439 value courtesy of Next Level Training. B.) A “grab bag” of preparedness gear and books from Jim’s Amazing Secret Bunker of Redundant Redundancy (JASBORR) with a retail value of at least $300, C.) A $250 gift card from Emergency Essentials, and D.) two cases of Meals, Ready to Eat (MREs), courtesy of CampingSurvival.com (a $180 value).

Third Prize: A.) A Royal Berkey water filter, courtesy of Directive 21. (This filter system is a $275 value.) , and B.) Expanded sets of both washable feminine pads and liners, donated by Naturally Cozy. This is a $185 retail value.

Round 35 ends on July 31st, so get busy writing and e-mail us your entry. Remember that articles that relate practical “how to” skills for survival have an advantage in the judging.     



Electronics for Mobile Self Sufficiency, by Blue Sun

I believe that the ultimate survival strategy for the ultimate collapse of civilization goes far beyond simply fortifying and stocking a retreat and locking yourself into a potential box canyon, I believe that the last resort for survivors is to develop the skills and knowledge to exist for years, or even for the rest of your life, in the most extreme and remote areas as a hunter-gatherer with nothing in terms of equipment except what you can carry on your back.

So, here I will present part one of my must-haves for total self-sufficiency: self-contained electronic tools that can be run indefinitely on inexpensive photovoltaic panel roll-ups and [hard] panels that can be folded into pocket-sized packets.

All of my power and interface connector cords are broken down into two pieces, with red and black Anderson Power Pole connectors.  That way, I can mate any [matching voltage] device-specific plug to any energy charging plug.  So, for instance, I don’t need separate miniUSB to USB, miniUSB to cigarette lighter,  miniUSB to AC-to-DC power cube, and miniUSB to gel cell battery cords.  All I really need is a  particular jack on one end of a cord, and Power Poles on the other. I have a variety of cords for specific devices and for specific power sources, like USB, cigarette lighter, gel-cells, and so on, each ending in the Power Poles.  I simply mate any device-specific power cord to any power supplier cord.  Keep two of each and you have the optimal capability with minimum weight and size.

[JWR Adds: I’m also a committed user and evangelist for Anderson Power Poleconnectors. Keep in mind that the specification for USB is 4.4 to 5.25 Volts, DC. The unit load was specified at 100 mA in USB 2.0, but increased to 150 mA in USB 3.0. To avoid any confusion, I recommend using different color Power Pole connectors for different voltage ranges. For example, you can use an odd color combination for the 15 Amp connectors for the 4.4–5.25 VDC USB voltages and red and black 30 Amp connectors for 11 to 16 VDC (car battery) voltage. Oh, and remember, in-line fuses are inexpensive insurance for your valuable electronic gear.]

Any items in my kit that run off of internal, external, or rechargeable AA or AAA NiMH batteriescan be charged with light, small, relatively inexpensive roll-up or foldable PV panels.  At the very least, the USB Charging 4 Watt Solar Pane should be included (available for about $100 from Ready Made Resources.)  Since it has a USB port, it can be used directly with any device that can charge through USB, and my Power Pole arrangement allows me to mate any of my [4.4–5.25 VDC USB voltage range] devices to the solar panel’s USB port. It weighs just over 6 ounces and folds up small enough to put in a pocket.  It puts out a voltage just slightly less than a powered USB port and can charge anything from cell phones to [a pair of] NiMH AA or AAA batteries.  It is also rainproof.  In peak sun, it produces not only enough power to charge batteries, but, simultaneously generate enough power to act as an active power supply directly connected to most devices. This model has been in use for a decade and has proven its reliability.  I carry two of them and, whenever possible, a larger and more powerful roll-up. (I own several variations.)

So, given my simple, but lightweight and efficient power sources, what battery-operated devices do I include as must-haves?

First and foremost, a Kindle ebook reader with wi-fi for my unit, depending on whether you care or not about the screen savers and a homepage banner showing ads, or prefer the artwork screen savers.  Note that the less expensive ad-based Kindle is the same as the other, and that none of the ads show when you are actually reading a book.  My Kindle weighs only 8.5 ounces, can store up to 3,500 books. With the wi-fi turned off, it will run for a month on a charge if you read an hour each day (Two months if you only use it a half-hour a day).  It has a 6″ (diagonal) screen and displays pages that are virtually identical to printed material (they refer to this as E Ink). It is only a third of an inch thick and height and width are 4.8″ x 7.5″. I can easily carry it in a back pocket of my jeans and still have room for my passport and a notebook.    It can let you carry around a massive library of books covering every facet of survival as well as a lifetime worth of books for enjoyment while adding negligible weight and taking up practically no space.

Second, I include my Samsung Charge 4G Android phone (I’m due for an upgrade to one of the anticipated second-gen 4Gs in the fall).  I leave the battery out when not actively using it to be absolutely, positively, belt-and-suspenders sure that I can’t be tracked through it.  It can provide a wide number of functions besides phoning (which will be impossible anyway if the power to cell towers go off).   However, it has full GPS capabilities, including maps equivalent to my car-mounted Garmins. BTW, I recommend using GPS in very small doses, whenever necessary, and only while you are on the move.  The GPS satellites will probably be functioning long after the grid goes down, because they are self-powered and probably will not be destroyed by an EMP attack. 

The second major function I use the phone for is that it will accept microSD cards.  I have a number of 32 MB microSD cards that I use to store additional books, as well as music, audio books, and other audio and video entertainment.  The third advantage is that it is capable of acting as a wi-fi hot spot, so I can use it to transfer books from my microSD cards to the Kindle via wi-fi.  This is a ‘force multiplier’ in that it gives me the ability to carry a very large library of reference and resource books.  The entire package is lighter and smaller than a single paperback book.  If you don’ have a GPS-enabled cell phone, then at least get the Garmin eTrex handheld for less than $75. It doesn’t let you be traced, since there is no identifying information included in the transmission.  This is a powerful waterproof unit with WAAS (which gives you accuracy to less than 10 feet), but it doesn’t have maps – just compass and GPS readings, though it is easily programmed for destinations and waypoints, and leads you to them via the compass and distance-to-travel indicator.  If you want a map, the Garmin Legend H has all-terrain four-color grayscale maps in storage for only $50 more.  Color maps are available in higher-priced models, but IMHO are not worth the extra bucks except when driving on the highway.  Both models are just over 5 ounces with two of my NiMH AA batteries, and are waterproof. I carry a Legend H as a backup to my cell phone GPS.

Next comes my communications gear.   I carry a portable Yaesu FT-817 QRP (low power) transceiver that can handle USB, LSB, AM, CW, VHF, UHF, PSK31 and a number of other operating modes.  It covers every ham band from 160m to 10m in the HF region excepting the newer 30 and 60 meter bands, which are really not necessary (a newer model includes at least the 60m band, and possibly the 30m band if you absolutely, positively  have to have them), as well as covering 6m, 2m, and 70 cm on VHF and UHF FM bands.  It runs on an internal NiMH battery which I upgraded to an after-market NiMH battery with a higher mAh rating and can also be powered by external AA batteries and an available Ni-Cd pack as well as from one of my solar packs.  I also installed a 500 Hz bandwidth Collins filter for CW operation.  It also has an internal keyer that can handle CW speeds from 4 WPM to 60 WPM. (I usually copy about 30 WPM – 35 WPM if I’m working CW regularly).  I carry around two keys. One old navy-style Bencher hand key, and a Kent single-lever paddle key (having first learned Morse in the mid 1960’s using hand keys and ‘bugs,’  I have never felt comfortable with dual paddle iambic keys, but YMMV).  In extremis, the up and down buttons on the mike can be used to transmit Morse code. The FT-817 has a maximum output of 5 watts, but can also dial that back dramatically.  The ham rule has always been to use enough power to make the QSO – but no more.   Given the right antenna, I’ve had CW QSOs with hams all over the world – including in Antarctica, as well as several shuttle crews and the International space station using only 500mW output.   You don’t need 1,500 W PEP to work the world. Though the lower the power, the more you have to rely on skill, experience, knowledge of propagation characteristics of each band at any given time of day or stage in the sun spot cycle, and antenna-craft.

Today, you can get any grade of ham license with either no Morse requirement or the old novice requirement of 5 WPM (which anybody with an IQ above room temperature should be able to master inside of three weeks if they use the Farnsworth learning technique).  Still, given that Morse is the most efficient means of post-SHTF communications, allowing communication at greater distances, with lower power, and much narrower bandwidth usage that any other mode that will still be operating, it would be of advantage to at least develop 13 to 15 WPM abilities. PSK31 and other digital modes are even better in all respects and are primarily why the ARRL has stopped requiring a trained emergency backup collection of hams with CW skills up to 20 WPM, however, digital modes require a computer and an interface box, and are only usable if you and the people you are trying to contact have similar gear.  Even the smallest laptop is too heavy to cart around in a backpack solely to run a PSK31 program.  Morse will be the best bang for the buck and has the advantage of requiring that anybody monitoring your radio transmissions must be at least as skilled and as fast as you – unlike voice communications that anybody can understand.  For use with other survivalists you are associated with, you might want to decide on an encryption scheme and then encrypt your messages before sending them.  Try to reach the Amateur Extra grade as soon as you can, since only the top grade of license gives you legal rights to operate on any legal ham frequency.  Lower grades have significant restrictions.

Another critical feature of the FT-817 is that it has an expanded frequency receiver that covers both of the major VHF and UHF public safety bands used by police, fire departments, EMTs, etc. as well as AM coverage of the entire civilian and military air bands, and even the commercial FM radio band.

I also have two HTs (handy-talkies or handheld radios) for myself and two matching ones for my wife.  One can fit into a shirt pocket and covers 6m, 2m, and 70cm – along with a wide-frequency receiver capability.  The other is a bit larger and only covers 2m and 70cm, but it does have APRS capabilities.  Both can run on a variety of power sources.  I have a mobile 50w dual-band unit in each car covering the same two bands with dual-frequency mag-mount antennas as close to the ground plane center as I can get them.   All of my handheld and mobile radios are capable of functioning as cross-band repeaters, and, in fact, one of my mobiles was parked at the Red Cross tent at Ground Zero, cross-banding both the police and fire bands so they could communicate despite their very different frequency ranges, for the first month after the attack.   Also, all of my emergency ham transceivers are ‘freebanded’ to provide two-way coverage of the VHF and UHF public safety bands.  Note that, in order to do this legally, you must have a very good justification.  I have worked as a volunteer communications first responder for 30 years with ARES, RACES, the state Office of Emergency Services (OEM) [in my state] run by the State Police and the American Red Cross, so I can freeband legally as long as I only transmit on public service frequencies in a dire emergency.

I carry two kinds of antennas for the FT-817.  The first is a batch of extremely light-weight homemade dipoles.  I carry two for each band I expect to be using, with one tuned for resonance in the CW portion of a band, and the other tuned for the SSB portion (except for VHF and UHF, which are FM voice – where my dipoles and small vertically polarized ‘sticks’ are tuned to the middle of the band.) I also have what IMHO is an ingenious modular kit for creating a long-wire antenna on any frequency the 817 supports.  It consists of a number of different length antenna wires, each terminated with a different color of Power Pole connector. I believe they come in 11 or 12 colors, so they can be color-coded.  The shortest one is resonant at 70 cm and all of them plugged together make an antenna resonant on 160m.  Various single wires and combinations of wires cover all of the other bands.  I use the colors to match the configurations to a laminated pocket chart that I created years ago.  It is easy to put them up in the trees if you use a string tied to a rock you can throw, and even easier if you have a slingshot.

When I want a radio scanner with wide reception coverage, I use a Yupiteru MVT-9000.  The Yupi is sometimes referred to as a “DC-to-Daylight” receiver since it receives on a continuous range from 0.1 MHz to 2,000 MHz with no gaps.  This means that, while the radio is legal to buy in every other country of the world, it is illegal in the United States because it does not block the cell phone frequencies. I bought mine when working on a consulting job in Europe and ‘forgot’ to leave it behind when I returned. Oops! The customs officer was clueless about its capabilities and passed it right through. (BTW, it is a good idea to select an FM radio frequency on each receiver or transceiver before going through US customs or TSA checks.  They will often ask you to turn on the device, and there is nothing more harmless and non-threatening than discovering that it is just a fancy FM radio. 

The Yupi has an external BNC connector and there are literally a thousand different antennas you can use with it, including single and multi-band.  It has everything one can want in a hand-held scanner, except for several recent capabilities: it has no PL/CTCSS and it has no trunk-tracking.  It does support decoding voice inversion, but doesn’t have support for Motorola APCO digital trunked systems or any of the analog trunking systems (Motorola type 1, type 2 and type 1/2 hybrid as well as EDACS and LTR).  If continuous unblocked coverage is not important to you, but trunking, CTCSS, and/or digital capabilities are, then I suggest something like the Uniden Bearcat BCD396XT, which covers all analog trunking systems, both 3600 and 9600 baud digital trunk tracking, CTCSS and DCS decode. I use both in different contexts.  Note that the 800 MHz systems were ‘rebanded’ in 2008, so it is far better to buy this or similar radios produced after the rebanding, so you don’t have to modify and reprogram the unit. If there is radio transmission going on anywhere after TSHTF, I truly believe that it is of inestimable value to be able to monitor it.

Proviso: Anybody putting a radio or scanner capable of receiving the VHF and/or UHF public service frequencies in a vehicle should check with the laws in their state (as well as any other state they will be driving through).  Some states have varied restrictions, and at least one (Minnesota) bans them outright.  This is another reason to get a ham license, as hams are licensed by the FCC and are exempt from [some] state regulations.  Keep a copy of your operator’s license in your wallet and be prepared for a trip to the police station when you encounter local yokels who are clueless about the Federal communications laws. You might want to keep a copy of the pertinent FCC regulations in your glove compartment as well.