Note from JWR:

Today we present another entry for Round 46 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:

First Prize: A.) Gunsite Academy Three Day Course Certificate, good for any one, two, or three course. (A $1,195 value.) B.) A course certificate from onPoint Tactical. This certificate will be for the prize winner’s choice of three-day civilian courses. (Excluding those restricted for military or government teams.) Three day onPoint courses normally cost $795, and C.) Two cases of Mountain House freeze dried assorted entrees in #10 cans, courtesy of Ready Made Resources. (A $350 value.) D.) a $300 gift certificate from CJL Enterprize, for any of their military surplus gear, E.) A 9-Tray Excalibur Food Dehydrator from Safecastle.com (a $300 value), and F.) A $250 gift certificate from Sunflower Ammo. and G.) A roll of $10 face value in pre-1965 U.S. 90% silver quarters, courtesy of GoldAndSilverOnline.com. The current value of this roll is at least $225.

Second Prize: A.) A gift certificate worth $1,000, courtesy of Spec Ops Brand, B.) A Glock form factor SIRT laser training pistol and a SIRT AR-15/M4 Laser Training Bolt, courtesy of Next Level Training. Together, these have a retail value of $589. C.) A FloJak FP-50 stainless steel hand well pump (a $600 value), courtesy of FloJak.com. D.) A “grab bag” of preparedness gear and books from Jim’s Amazing Secret Bunker of Redundant Redundancy (JASBORR) with a retail value of at least $300 and 10 TAPCO polymer magazines (5 AR and 5 AK) courtesy of Armageddon Armory, E.) A $250 gift card from Emergency Essentials and F.) Two cases of Meals, Ready to Eat (MREs), courtesy of CampingSurvival.com (a $180 value).

Third Prize: A.) A Royal Berkey water filter, courtesy of Directive 21. (This filter system is a $275 value.), B.) A large handmade clothes drying rack, a washboard and a Homesteading for Beginners DVD, all courtesy of The Homestead Store, with a combined value of $206, C.) Expanded sets of both washable feminine pads and liners, donated by Naturally Cozy. This is a $185 retail value, D.) A Commence Fire! emergency stove with three tinder refill kits. (A $160 value. E.) A Tactical Trauma Bag #3 from JRH Enterprises (a $200 value), and F.) Two Super Survival Pack seed collections, a $150 value, courtesy of Seed for Security.

Round 46 ends on May 31st so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how to” skills for survival have an advantage in the judging.



Silver Thoughts For The Beginner, by Jay in Missouri

One doesn’t have to look far in the news today to catch a conundrum in any article talking about precious metals. If you read the news shops you will have noticed articles crowing titles like “Silver and Gold Have Lost Their Shine!” and “The Precious Metals Market Tanks!”. The strange thing is if you are to walk into any coin or jewelry shop tomorrow and ask to buy a few coins, you will most likely be told the wait time is several weeks, and you’ll be paying prices above the current silver price. While the news outlets are singing the death knell of precious metals, truth is the demand for physical is higher than it has ever been, and is far outstripping the market prices. This happens when people remember their history lessons from school and determine to not get Weimared into trading a wheelbarrow of greenbacks for a sack of ‘taters. My article hopes to inspire you be a canny investor, and buy on the dips to create a shield for yourself. 

Well, perhaps I am getting ahead of myself. I will reel things back a bit and go over a some goodies I have leveraged in order to stack a little more argentum, and to be a little more prepared in the task of saving a portion of my family’s hard earned money.

First of all, the web is your best friend. What better resource available to you, short of the library, where you may research any given topic and educate yourself. You are on the right path in checking out Survival Blog. In addition to Survival Blog, there exists a ton (troy, not avoirdupois; ha-ha) of other resources out there, so much so that it all can be a bit intimidating. Before one simply throws their hands up in frustration, or is afraid to start something new, I’d like to flatten out some of the bell in your learning curve and link you up by and by to a few resources (as well as offer a few ‘why’s’).

First things first. Let’s turn to the Good Book:

I take great comfort in Luke 12:32: “Fear not, little flock; for it is your Father’s good pleasure to give you the kingdom.”

And in 2 Timothy 1:7: “For God hath not given us the spirit of fear; but of power, and of love, and of a sound mind.”

Acknowledging God, I believe we should move forward in faith.

Here are those web sites I mentioned earlier. I check these on a daily basis:

The first resource I check is one called Coinflation. It is an easy-to-read site which strictly talks coin values. They have an up to the minute feed on US coins, and you will see later why this comes in handy. They list each denomination, list it’s face value, it’s silver value, and the silver % against face value. Right here you need to know a couple of things; these coins are called ‘junk silver’, not because they are junk, but because they aren’t desirable from a collectable aspect. The ‘junk coins’ are the normal run of the mill coins our grandfathers used to to pay the shoe shine guy, to buy a slice of pie and a cup of coffee, and to lend to the fella who asked “Hey brother can you spare a dime?” This old pocket change was in circulation before someone set it aside realizing the silver content made it worth more than the .05/.10/.25/.50/1.00 stamped on the reverse. You see, in the US, nearly all minted coins (except for pennies and nickels) prior to 1965 had silver content in them. Congress in 1964 passed an act taking silver out of all the coins except for a few. We’ll get to that in a wee bit. If you’d like to do a bit of light reading, you can read the address from President Johnson. (Please note he calls the material ‘valuable’ in his address). 

As you can imagine the value of these pre-1965 coins far exceeds their face value, meaning that a 1964 quarter is worth far more than the .25 marked on it. These coins are made of 90% silver. The other key date to keep in mind here relates to half-dollars (a.k.a. fifty cent pieces). The next time you are in line at the grocery store, ask for your change in any ‘odd coins’ if they’ve got them. The cashiers count their till before and after their shifts, and know when they get a ‘weird one’. In looking at halves, certainly look for pre-1964 dates, but don’t forget the 1965 to 1970 dates either. Those years of Kennedy’s are 40% silver and still fetch far more than fifty cents at the coin shop (presently the 40% ones are going for $3.58). Now, armed with the numbers from the Conflation calculations, it is easy to do a little math in your head before you go into your brick and mortar coin shop. If you have a cell phone with a data plan, check it right before going in; as silver and gold are a commodity and can fluctuate. If you are still a bit nervous, ask for a print out of current prices. The good shops will accommodate you, because they want your business. The shady ones will pan out real quick; they want to turn a quick buck on the desperate folks. They don’t typically stick to current market prices, or accommodate you in a printout of current prices. Spend your hard earned federal reserve notes at the place that wants your business. 

The next web site falls in the category of ‘read up, student’. It is Zero Hedge. The comments section can be quite coarse and rough in language, but the owner (Tyler Durden, an obvious nom de plume) will publish stories and guest posts with a bent to telling the truth. They speak heavily of the markets. Go, read, and educate yourself. 

The third recommendation I make is for you to find the web site of your local coin shop – The ones who do a lot of business will also have an up-to-date price list. This comes handy to see what they are charging over spot, if they have a lag to the current market, and what their inventory is; saving you gas money before you drive over there. My local coin shop even lists the past several years worth of their auctions on their more rare/collectable stuff; helping me further by building my case history on my next purchases. If your local shop has such a resource, use it and arm yourself with knowledge. In my experience, fair business means letting your customer know what the current prices are, by providing a safe place to buy and sell, and by running an honest shop. The coin community will quickly oust unjust or dishonest businesses (and FYI, the ‘We Buy Gold” places do not sell, they only buy, and only at reduced prices). If you have a friend who collects coins, ask them what stores they go to, I guarantee they will have an opinion on the shops in your area. 

My next web site recommendation is to point you to a forum for numismatists (in simple terms, numismatists are folks who collect coins.) If you get into the collectible aspect of things (called numismatics), you will want to know more about grades, dates, mint marks, fakes, if one cleans a coin versus not cleaning it, coins in holders (called ‘slabbed’) or coins loose (called ‘raw’). Once you sign up to participate in the web site, don’t be afraid to ask questions; I recommend the CoinCommunity site due to the culture of courtesy and sharing there. I further recommend it as the site has a whole passel of folks who are the real deal. Not only will you see some beautiful coins, but exonumia (items other than coins; the medals, tokens, and scrip) and also ephemera (the boxes, holders, news ads and other various ‘throw away’ stuffs the coins came with way back when). Some of these folks just have to be of the museum curator ilk.

The final recommendation I will make is for you to buy yourself a Red Book. This spiral bound yearly publication talks about history, rarity, collectibility, and mintages of coins. Start with a section you are interested in (say Morgan dollars) and read it. Mark the interesting bits. Refer back to it. If you are truly abstemious in spending any money on printed materials (my father comes to mind here), or simply want to start this on the cheap, Whitman has a web site with an electronic edition.

I am in no way associated with any of these companies, and stand in no way of profiting from these recommendations. I instead pen this article in hopes of reaching the reader who is much like the very kind/very confused approximately 80 year old lady I met last week at my local coin store. Her husband had cashed out a sizable chunk of their retirement to take delivery on a ‘monster box’ (a 500-count case of 1 oz silver coins, a.k.a. American Silver Eagles, .999 pure silver rounds) and some fractional gold coins (called fractional because they come in various denominations; $50/$25/$10/$5, effectively a tenth oz, fifth oz, half oz and 1 oz coin; a.k.a. Gold American Eagles, .916 pure gold rounds). She was supportive of her husband, but had a bunch of questions, and was too timid to ask the sales guy. I struck up a conversation with her and talked about what I was looking at that day (so happened to be looking at commemorative slabbed coins; I saw an amazing MS65 Lafayette dollar!). Her interest was piqued, she was polite, and though I may sound like an apologist here, the people behind the counter were way too busy to do anything but fill orders (the line was something like four people deep when I was there). My only regret, looking back, is I never got to tell her how impressed I was was that she and her husband were trying to hedge themselves against the craziness in the investment markets. 

Okay, lets shift gears here a bit. If you, as a potential silver stacker, have stuck with me this far, perhaps I am almost convincing you to try some of these suggestions. Read on then, and lets talk a bit more about some helps.

Before you rush off to the coin store, begin to keep a close eye on silver spot price against what your local coin shops are asking per/oz. As of about 13:00 central time, when I began this article, there is a lot of stuff going for ‘over spot’ depending on what you are trying to buy. When I started stacking coin (at Mr Rawles’ suggestion), prices were a bit lower than now, and the ‘over spot’ margin was significantly smaller. The huge surge in demand of physical (instead of paper; like all the other physical commodity markets from pork bellies to sweet light crude oil), has combined with the present lower prices, and the resulting action is that dealers have raised their prices. 

As of today, according to my local coin shop’s web site, ASEs (American Silver Eagles) are about $5.80/oz over spot, “About Good” condition Morgan or Peace dollars (.773 pure silver) are $4.22/coin over spot, and ‘junk silver’ is going for $4.34 over spot/for $1.00 worth of ‘face value’. The smallest ‘over spot’ margins (on coins minted by the United States mint) I have found are the 5 oz America The Beautiful bullion coins. Bullion, for simplicity of explanation, is for precious metal content, and is not typically collected for numismatic factor. There are however some limited strike, proof strike, or limited release bullion coins. I state this as it can be confusing to see a bullion America The Beautiful coin and a slabbed America The Beautiful coin. The slabbed one will cost more because it is graded, and collectible. Yes, we numismatists can be a wee bit zany. s

I am not even going to start into Canadian, Mexican, Australian, Chinese, or other mintage coins, be they bullion (.91 and higher) or even numismatic. This article today is just for US Mint products to help the starting investor, as they are recognizable by everyone in the event of a Schumer/Oscillation Device occurrence. Ideally you can position yourself to not have to explain to your neighbor why your Peso from 1943 is 90% silver. As my late grandmother use to say,”K.I.S.S. stands for ‘Keep It Simple, Son'”.

I also tend to shy away from the odd weight/off-brand/hand poured stuff due to the influence of Chinese fakes out in the market. Fears over fakes is an entire other conversation (there is at present some noise out across the wire that regular ‘junk silver’ is the next target; Morgan and Peace dollars have been faked for years), but to arm yourself against them keep three ‘M’s’ in mind.  Measurements: the weight, thickness, diameter of coins (there are accepted dimensions), Magnetism: a silver coin when held at an angle will let a small strong rare earth magnet slide slowly across it’s face, and Melody: when you flip a silver coin on a hard surface , it should ‘sing’ or ring. 

The only other thing I can suggest with regards to fakes is to buy from a reputable dealer. Craigslist may have some mighty tempting ads, but you are truly on your own, and if you are just starting out, Caveat Emptor, buyer beware! Learn what to look for before you spend a passel on comparatively worthless plated copper fakes.

In closing, let me reassure the folks who feel like they are ‘too late’ to start. Fear not! I started in 2010 (as I mentioned, at the recommendation of Mr. Rawles), and have taken many small steps since then. While it is true that many people started pulling silver coins out of circulation back in 1965 (45 years before I started, mind you), I am still moving forward with my plan. Stock up on beans, bullets, and Band-Aids, and then (only after all the other bills are paid) pick up any bullion in small denominations. For the folks who feel it is too late, don’t let hindsight poison your faith. Take the small steps and God will bless you. 

I hope these thoughts help. In parting, I quote Mother Theresa; “We can do no great things, only small things with great love.” God Bless, – Jay in Missouri



Letter Re: Sewing, Mending and Altering Your Clothing After the Ball Drops

James Wesley,
I have a few comments on the recent clothing article:
 
Good heavy work clothing is around, if you know where to look. Carhartt, Prison Blues, Roundhouse, Wild Ass jeans and Dickies to name just a few of the better known names. Treat this clothing as an investment and buy it even if its expensive as it’s worth every penny.
 
Buttons.  Lay in a store of metal buttons.  I can’t tell you how many plastic, conventional buttons I’ve smashed working on something.  Metal shirt and pant buttons don’t break and wear for years. Plan on making clothes using buttons, including suspender buttons.  Zippers break, jam and are far harder to replace than good metal buttons. 
 
Lay in a pattern for overalls.  Sure, they look dorky but there isn’t a better piece of clothing for hard work.  You can get them with double knees, all of them have the metal buttons, and the well made ones are made with 12 ounce denim, so they wear well for years.  Lots of pockets for tools, easy to layer up under them in cold weather, it’s no wonder they’ve been in use for decades. – Bill S.



Economics and Investing:

Check Out These Insane Levels of Youth Unemployment In Europe

Fed Money Printing Games Out of Gas – Karl Denninger. (Thanks to Jim W. for the link.)

Bob in Virginia recommended this by Bill Gross: Here Are The Four Big Ways That The Government Will Steal Money From Bondholders

While the paper market is in the doldrums, the physical metals market is searing hot: U.S. Mint Sales of Gold Coins Jump to Highest in Three Years. (Thanks to G.G. for the link.)

Items from The Economatrix:

Internet Sales Tax: What You Need to Know

Online Sales Tax Overwhelming Passes Cloture Vote

Sand Castles in the Midst of an Economic Tsunami

US Mint Suspends Sales of Small Gold Coins–Premiums Rising



Odds ‘n Sods:

Ready Made Resources is in the middle of a 25% off sale on Mountain House canned long term storage foods. The sale ends on May 6th, so order soon.

   o o o

S. 336, the Internet Sales Tax bill, can still be stopped. So can the Illegal Immigrant Amnesty Bill. Please contact your U.S. Senators.

   o o o

Diana suggested this by former congressman Dr. Ron Paul: Liberty Was Also Attacked in Boston.

   o o o

Reader Mark A. mentioned that Widener’s has D&H mil-spec AR-15 magazines back in stock for as little as $14 each. Oh, and speaking of AR magazines: Magpul begins making ammunition magazines outside Colorado. (Thanks to F.G. for the latter link.)

   o o o

Despite its abundant lame-iosity that makes it just marginally watchable, the television series Revolution has been renewed for a second season. I hope that eventually a much more realistic post-collapse television show will be produced. (Jericho came closer, but it was still short of the mark.)



Jim’s Quote of the Day:

“Therefore do not let our princes accuse fortune for the loss of their principalities after so many years’ possession, but rather their own sloth, because in quiet times they never thought there could be a change (it is a common defect in man not to make any provision in the calm against the tempest.)” – Niccolo Machiavelli, The Prince



Notes from JWR:

Reminder: There is a “silver strike” on the banks planned for today, May 1, 2013. Send the banksters a message and withdraw your extra cash today and use it to buy physical silver!

May 1st is also the birthday of Louis Cukela, a Croatian-born American Marine, born 1888, died March 19, 1956. He was one of only 19 two-time recipients of the Medal of Honor.

Today we present another entry for Round 46 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:

First Prize: A.) Gunsite Academy Three Day Course Certificate, good for any one, two, or three course. (A $1,195 value.) B.) A course certificate from onPoint Tactical. This certificate will be for the prize winner’s choice of three-day civilian courses. (Excluding those restricted for military or government teams.) Three day onPoint courses normally cost $795, and C.) Two cases of Mountain House freeze dried assorted entrees in #10 cans, courtesy of Ready Made Resources. (A $350 value.) D.) a $300 gift certificate from CJL Enterprize, for any of their military surplus gear, E.) A 9-Tray Excalibur Food Dehydrator from Safecastle.com (a $300 value), and F.) A $250 gift certificate from Sunflower Ammo. and G.) A roll of $10 face value in pre-1965 U.S. 90% silver quarters, courtesy of GoldAndSilverOnline.com. The current value of this roll is at least $225.

Second Prize: A.) A gift certificate worth $1,000, courtesy of Spec Ops Brand, B.) A Glock form factor SIRT laser training pistol and a SIRT AR-15/M4 Laser Training Bolt, courtesy of Next Level Training. Together, these have a retail value of $589. C.) A FloJak FP-50 stainless steel hand well pump (a $600 value), courtesy of FloJak.com. D.) A “grab bag” of preparedness gear and books from Jim’s Amazing Secret Bunker of Redundant Redundancy (JASBORR) with a retail value of at least $300 and 10 TAPCO polymer magazines (5 AR and 5 AK) courtesy of Armageddon Armory, E.) A $250 gift card from Emergency Essentials and F.) Two cases of Meals, Ready to Eat (MREs), courtesy of CampingSurvival.com (a $180 value).

Third Prize: A.) A Royal Berkey water filter, courtesy of Directive 21. (This filter system is a $275 value.), B.) A large handmade clothes drying rack, a washboard and a Homesteading for Beginners DVD, all courtesy of The Homestead Store, with a combined value of $206, C.) Expanded sets of both washable feminine pads and liners, donated by Naturally Cozy. This is a $185 retail value, D.) A Commence Fire! emergency stove with three tinder refill kits. (A $160 value. E.) A Tactical Trauma Bag #3 from JRH Enterprises (a $200 value), and F.) Two Super Survival Pack seed collections, a $150 value, courtesy of Seed for Security.

Round 46 ends on May 31st so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how to” skills for survival have an advantage in the judging.



Make Your Own Inexpensive Frangible Slugs, by Sailor Frank

]Editor’s Note: See my warning about this technique, below!]

With the current ammo shortages that have been plaguing the country and seem to have no end in sight, having a way to stock up on a key caliber for your preps is vital. Hindsight being 20/20 many of us now wish we would have put more of our valuable prepping budget towards stocking up on ballistic wampum. I believe I’ve found a way to still stock up on some very useful ammo while still making your valuable prepping dollars stretch just a bit farther.

The shotgun is universality accepted as being a part of almost every prepared person’s arms locker due to its flexibility and firepower. Of course the ammo shortage has also reached into the shotgun gauges, trying to find a box of 00 buck or slugs is almost impossible, and if you do their price has significantly increased in the last year. On the other hand a box of bird shot can be found relatively easily and for less than ten dollars ($8.99 at our local Wal-Mart.) While I wouldn’t want to be hit with bird shot its use as a self defense round is very limited. I’d like to discuss how to turn readily accessible bird shot into a formidable self defense frangible slug.                 

The “Waxer Slug” is a simple but great idea in my humble opinion. By removing the shot from a bird shot shell and mixing it with melted wax and putting it back you have made a frangible slug. The benefits of a waxer slug are pretty impressive. First and foremost is cost, they are dirt cheap to make, giving us the ability to stock up. Another benefit is that the effective range of the birdshot is actually increased, but it still has the low recoil of a bird shot load. Another benefit the waxer slug has is its slug like penetrating power, along with its unbelievable stopping power. This is due to the high transfer of energy into the target that frangible rounds are famous for. Basically when a wax slug hits something it penetrates a bit then shatters (fragments) back into its original shot form which can create massive wounds and unreal destruction to tissue and bone. You have to see these in use to really appreciate their destructive power. Of course there is always a downside to consider. High temperature can affect these so desert climate users beware.  Taking into consideration the melt temperature of wax, I would never uses these shells in Temperatures over 95 degrees. Also range is less than a real factory slug. A wax slug just isn’t very aerodynamic and has been known to tumble, so the optimal range is 50 yards, with 65 yards being the limit that I’ve been able to hit a torso target with six out of seven shots. Please balance the pros and cons to decide if this is for you.

Okay if you’re still interested… the first step you need to do is gather a few low cost materials. Of course Bird shot shells are the first item to procure. I’ve found the best success using shot ranging from 7.5 to 9. The larger size pellets tends to tear apart the slug while these smaller sizes cost less and work better (Win-Win). There are some other very basic materials that are needed and as you become familiar with the process you can add or substitute a few of them. One item that you will need will be a small pot (that your wife will not want back) this will be used to melt the wax. A larger pot that the small pot can fit into is optional but this you can borrow from your wife as you won’t mess it up. You’ll also need a cheap soup spoon (that your wife won’t miss). I suggest using a vice or a pair of pliers to bend the spoons end into more of a scoop to approximately fit the diameter of a shot shell. This will significantly cut down on the mess. The next item you will need will be a pair of scissors or a box cutting knife. Gloves also might come in handy as you will be dealing with hot items and lead.

Of course you will need some wax. The wax can be found in any number of places. Focusing on keeping this process as cheap as possible I have used broken crayons which of course are free if you have children. Another supply source of course is candle wax. My candle wax is also free because I recycle the last ½ inch that seems to never be used from my wife’s scented candles. Yes I have to put up with scented shells but I keep them in a separate ammo can so I don’t take them into the field by mistake. I don’t want to chase away game or give away a position because I saved a few pennies on wax. Another source of wax is of course is gulf wax. For only a few bucks a block of Gulf wax will make a couple hundred shells easily with none of the afore mentioned scent problem to mess with.
A side note, if are a organizational freak like me, you can color code your wax for different shot sizes to be different colors or you can color code all the scented shells are red while the unscented shells are blue. Pick which ever colors work for you. My good friend has mixed up a “Zombie Green” color just to look cool. No one said you can’t have fun while getting prepared.  

After you have gathered all of your materials, the first step is to trim off the top 16th of an inch off of the shot gun shell. If possible just remove the crimped edge of the shell so that you can remove the top. You can use scissors, a sharp knife, or a box cutter whichever you are more comfortable with. Please be careful as it is easy to slip and trim your thumb instead of the plastic shell using a box cutter.  Something to keep in mind before you trim your first shell is that your goal is to remove (and retain) the shot pellets and leave as much of the shell intact as possible, so the wad doesn’t become loose. It only takes 1-2 shells to get the amount to trim right. After the top is open pour the shot (small ball bearings) into a small container as we will need it again in a few minutes.
If you wife will let you play in her kitchen, it will save some additional money, if not a single eye hot plate for your work bench is the answer. At around twenty dollars it might be worth it if you plan on making a lot of wax slugs. Either way take your large pot and fill it 1/3 full of hot water. Place your chosen wax supply in the smaller pot and then put the smaller pot inside the larger pot.  Then turn up the heat to bring the water to a boil.  This will melt the wax while reducing the risk of overheating it. The melt temperature of wax differs but 125 to 175 degrees is a good target.  Be careful as wax can combust. The flash point is different for different waxes but the rule to follow is “If the wax begins to smoke lower the temperature!”  Practice vigilance when you melt wax, don’t leave it unattended while heating.  If it does combust DO NOT pour water over it, remain calm turn off the heat and put a lid over the pot to smother the flame.  I have never had this problem but we are supposed to be prepared aren’t we?

After the wax has liquefied pour in the shot from the prior step. Mix them with the wax and let them warm up a bit so the wax infuses the shot.  Take your shells from the first step and place them on a paper plate or a pie pan. This is to contain the mess, no matter how steady your hand is you will spill some shot.  Slowly spoon the shot into the shell directly onto the wad. You can use the bent spoon as I do, a small funnel, or I’ve even used a folded piece of paper for this step. Whatever works best for you. As you fill the shell with the shot mix, wax will leak through the cuts in the plastic wad but this is fine as it will keep your slug from falling out on accident. The goal is to fill the shell with mostly shot–not all wax. Some wax is fine, but you want as much shot as possible up to the top of the wad. Do not have shot past the top of the wad.

After the shell is full of shot (within a 16th of an inch of the top) top it off with a bit of liquid wax to make a sort of smooth top seal. This is an important step as you do not want any shot sticking out on top. There is a very slim chance of a pellet that does protrude striking another shell’s primer in a loading tube thus ruining your weapon and possibly ruining you. Plan for the worst and make sure that never happens by having strict quality control.                 

Set the shells to the side for a few minutes to cool. After about two or three minutes the wax will have cooled and hardened enough to clean off the outside of the shell. I use the knife from the first step to lightly scrape off the excess wax that tends to drip down the side of the shell.  This is a tedious final step but vital to ensure proper feeding in pump shotguns.

Now to answer two questions before they are asked:

1. I’ve shot a few hundred wax slug rounds and have found no noticeable wax build up in the barrel. Of course I still clean my weapon after each use, but I’ve found no additional cleaning was needed above what I do when I shoot normal factory rounds.

2. How is adjusting the weight of shot sent downrange safe? The truth is that you’ll actually end up loading slightly less shot following this procedure and the weight of the wax is insufficient to change the weight of the shot in any significant way. So the power load is still well within the safe range.          
       
One other thing to consider, adding some extra flexibility to this process is another option.  Instead of using wax try using hot glue. Hot glue will increase your cost but it will make a much harder slug which will not fragment as easily thus ensuring greater penetration, also using hot glue instead of wax will significantly reduce the temperature limitation of wax. Depending on your needs this option might be useful to you, but as always YMMV.

I realize this isn’t for everyone but with the proper safety checks in place, I do believe that the ability to turn an inexpensive, readily available round into a formidable defense round is worth sharing.

JWR Adds This Important Safety Warning: Reader Ken S. wrote:

“Making slugs using wax is VERY DANGEROUS!!!!  It is an old idea from the past that got some traction in the old timers myth telling.  On the second or third shot you can have enough wax build-up in the barrel to cause the next shot to stick [part way down the barrel] resulting in a blown up shotgun [when a subsequent shell is fired.]  I know.  It happened to me about 50 years ago.   I totally destroyed a Remington pump gun and am very lucky I escaped with some minor cuts and bruises.  [The usefulness of wax-filled shells] is a rural myth.  Do not try it.  I have heard this story re-surfacing every few years and everyone I ever heard of that tried it ended up blowing up their gun.  Sometimes with serious injury.  Please alert your readers.”

Based on Ken’s experience, clearly the wax shell technique would only be suitable for a single-shot shotgun, and only then if the gun’s bore were inspected and thoroughly cleaned between shots. Therefore, I cannot recommend using “waxers” for self defense, or anything beyond single shot use, in absolutely desperate situations. (And I mean truly desperate, such as: You have ONLY a handful of birdshot shells, yet you must kill a deer or face starvation for the coming winter.)

As previously mentioned in SurvivalBlog, a much more safe technique that yields similar results is making cut shells, but this is not advised for repeating (pump or auto) shotguns. As with any other ammunition modification, use great caution. If a cut shell were to come apart inside your gun’s magazine tube, it would create a horrible mess and probably result in a jam that might take a long time to clear. Therefore, I cannot recommend using cut shells for self defense either. (That is, where someone is returning fire–unless you are desperate and have no other alternative.) But cut shells might suffice for hunting or for culling large garden raiders like deer or feral pigs.



Penny and Nickel Debasement Bill Introduced in U.S. Congress

Reader Joe K. sent this news link: Bill Seeks Steel Cents, Nickels, Dimes, and Quarters. Note that the bill’s main sponsors are from Ohio, which is a steel manufacturing state. But this legislation is more than just grandstanding. Unlike similar legislation in previous sessions of congress, this new bill will probably gain traction in the current congress, since the government has now been losing money with the seigniorage costs of pennies and nickels for many years. Well, I’ve been warning you since 2009, folks. While this bill is still in committee, I suspect that a coinage composition change will take place before the end of 2013. The ravages of inflation made the change inevitable. The Coinflation web site presently lists the scrap value of the base metal content of the current U.S. zinc penny at $0.021192 (211.92% of face value) and the cupronickel five cent piece at $0.045671 (91.34% of face value), and their actual minting and distribution costs are actually much higher. According to Coin Update, it cost the US Mint $0.1009 to produce and distribute each nickel, as of fiscal year 2013. They can’t go on spending 10 cents producing each five cent coin much longer.

You gave been warned. I strongly urge you to go to your local bank or credit union and ask them to order you some $200 U.S. Mint Boxes of nickels. In just a few years, after the debasement is completed and the rational self interest of Gresham’s Law psychology purges all of the real cupronickel nickels from circulation, rolls of pre-2013 nickels will sell at a substantial premium. Because nickel is a base metal, this premium will never be as high as that for silver coins, but at least you’ll know that you possess some genuine money that will hold its value, even if the Quantitative Easing monetization process continues indefinitely. (Quantitative Easing is debasement of the dollar, writ large.)

In addition to hedging against gradual inflation, holding nickels will also provide you insurance against the less likely sudden revaluation of the Dollar. As I’ve explained previously, if a zero is ever lopped off the Dollar, new paper currency will be issued, but the old coinage will probably still circulate. (Since it would be too expensive to replace.) This will make anyone holding coins the beneficiaries of an overnight 10X gain.

This may be your last chance to stock up on nickels at face value, and without any sorting, folks! If you don’t already have four or five .30 caliber ammo cans full of rolls of nickels, then you are behind the power curve. Don’t dawdle any longer. – J.W.R.



Letter Re: Prepping, World-Wide?

Mr. Rawles;
I had a conversation with a friend and the question came up: “I wonder how the rest of the world is on prepping or is it mostly just the US?”

Can you shed some light on that by any chance? Thanks, – P.W.

JWR Replies: Preparedness is indeed catching on, globally. Just look at the visits map for SurvivalBlog. (We have had visits from 200 countries!) Granted, survivalism is primarily a phenomenon of the English-speaking world, but there is also considerable interest in France, Germany, Russia, Japan, and in the Scandinavian countries. And there probably would be greater interest in the Third World, if not that income levels are so low that it is difficult for most families to get beyond a subsistence level of Hamsterungen. But I have heard from some American travelers that wealthy families in India, Pakistan, Panama, Honduras and several other countries have also been seen stocking up.



Economics and Investing:

Reader C.D.V. suggested this article: Spain Is Beyond Doomed: The Two Scariest Unemployment Charts Ever

M.E.W. sent: Run on Guns: AR-15s Sales Soar. JWR’s Comment: A modern battle rifle is a great example of a practical, barterable tangible investment. You can only shoot a bad guy with a Krugerrand with the aid of a sling shot, and that constitutes a very inefficient use of resources.

M.M. sent this ominous news from Canada: Conservative 2013 Budget May Allow Banks to Confiscate Customer’s Deposits

Items from The Economatrix:

Jim Rogers:  Every Government Debasing Their Currency, Gold Going Much Higher

The Global Economy Is Losing Steam

Irish Savers & Pensioners Just Got Cyprus’d

Home Sales Slip In March



Odds ‘n Sods:

Reader C.W. forwarded some very scary news: Perhaps just one mutation away from fast transmission human to human transmission? H7N9 Carries Genes from Rare H9N2, H7N3, H4N9, H11N9 Bird Flu Viruses. Here is a quote: “This finding implies that H7N9 viruses have partially acquired human receptor-binding specificity. All of the H7N9 human isolates examined contained a lysine residue at position 627 in the PB2 protein. It is well known that this lysine residue contributes to the replication and transmission of avian influenza viruses in mammalian hosts. It is likely that the acquisition of this lysine in H7N9 viruses during their replication in human hosts has significantly contributed to their virulence and lethality in humans.”

   o o o

Just ten years left, Larry! Former Birmingham, Alabama Mayor Larry Langford will be eligible for parole on May 1, 2023. Perhaps Mayors Against Illegal Guns (MAIG) should start a “Graybar Hotel Pen Pal Page” for their many members that are in prison, or that were convicted but somehow weaseled their way out of prison terms. Oh, BTW, there is even closer light at the end of the tunnel for former mayor Eddie Perez. He had faced a maximum sentence of 55 years, but was sentenced to just eight years, suspended after three years, with three years in prison, followed by three years of probation.

   o o o

F.G. sent: NeighborhoodScout’s Top 25 Most Dangerous Neighborhoods in America. Needless to say, the American Redoubt’s few cities are at the opposite end of their lists.

   o o o

For just the month of May, Freeze Dry Guy is offering Freeze Dried Pineapple by the case: six # 10 cans yielding 114 servings, with free shipping in CONUS. The special introductory price is good until May 31st . For more information, visit their web site or phone 866 404-3663

   o o o

G.G. flagged this one: Government Uses Color Laser Printer Technology to Track Documents





Notes from JWR:

Today is the birthday of science fiction novelist Larry Niven. (Born, 1938.) Along with Jerry Pournelle, he co-authored the survivalist classic Lucifer’s Hammer.

April 30th is also the birthday of futurist and computer industry writer Ed Yourdon. (Born, 1944.)

Today we present another entry for Round 46 of the SurvivalBlog non-fiction writing contest. The prizes for this round include:

First Prize: A.) Gunsite Academy Three Day Course Certificate, good for any one, two, or three course. (A $1,195 value.) B.) A course certificate from onPoint Tactical. This certificate will be for the prize winner’s choice of three-day civilian courses. (Excluding those restricted for military or government teams.) Three day onPoint courses normally cost $795, and C.) Two cases of Mountain House freeze dried assorted entrees in #10 cans, courtesy of Ready Made Resources. (A $350 value.) D.) a $300 gift certificate from CJL Enterprize, for any of their military surplus gear, E.) A 9-Tray Excalibur Food Dehydrator from Safecastle.com (a $300 value), and F.) A $250 gift certificate from Sunflower Ammo. and G.) A roll of $10 face value in pre-1965 U.S. 90% silver quarters, courtesy of GoldAndSilverOnline.com. The current value of this roll is at least $225.

Second Prize: A.) A gift certificate worth $1,000, courtesy of Spec Ops Brand, B.) A Glock form factor SIRT laser training pistol and a SIRT AR-15/M4 Laser Training Bolt, courtesy of Next Level Training. Together, these have a retail value of $589. C.) A FloJak FP-50 stainless steel hand well pump (a $600 value), courtesy of FloJak.com. D.) A “grab bag” of preparedness gear and books from Jim’s Amazing Secret Bunker of Redundant Redundancy (JASBORR) with a retail value of at least $300 and 10 TAPCO polymer magazines (5 AR and 5 AK) courtesy of Armageddon Armory, E.) A $250 gift card from Emergency Essentials and F.) Two cases of Meals, Ready to Eat (MREs), courtesy of CampingSurvival.com (a $180 value).

Third Prize: A.) A Royal Berkey water filter, courtesy of Directive 21. (This filter system is a $275 value.), B.) A large handmade clothes drying rack, a washboard and a Homesteading for Beginners DVD, all courtesy of The Homestead Store, with a combined value of $206, C.) Expanded sets of both washable feminine pads and liners, donated by Naturally Cozy. This is a $185 retail value, D.) A Commence Fire! emergency stove with three tinder refill kits. (A $160 value. E.) A Tactical Trauma Bag #3 from JRH Enterprises (a $200 value), and F.) Two Super Survival Pack seed collections, a $150 value, courtesy of Seed for Security.

Round 46 ends on May 31st so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how to” skills for survival have an advantage in the judging.



Sewing, Mending and Altering Your Clothing After the Ball Drops, by Belle

My husband, children and I live in a largely off-grid community in the desert southwest.  We live on forty acres with solar power, a water well and water catchment.  We garden and live with chickens and are adding skills to our new life style all of the time.  My husband does not like for me to be too specific, but I outlined some of our lifestyle changes in an article on trash in July 2012.
This article is about clothing.  It is about sewing and mending and altering.  I know you’d rather read about AR-15’s, but IMHO, clothing is going to be a big deal in a TEOTWAWKI situation.  Before radically changing our lifestyle two years ago, I was the typical American mother.  I bought new clothing when the old became too small or too worn.  I bought when the seasons changed, and worse, I bought when the fashions changed.  Another thing I steadfastly did was to donate clothing by the tub and box full.  I worked very hard at keeping our closets clean and clutter free.  This is something that every home management book, blog, and article tell American moms to do. 

Whether you shop in charitable thrift stores or big box discount stores or big name fashion stores, the quality available to most Americans is pathetic.  But, while we still have shopping opportunities, look for quality clothing, for yourself and every member of your family.  Buy it whether you need it or not.  And once you own it, where ever you got it, you need to hang on to the quality stuff and learn to repair it.  I advocate charitable giving, but I also advocate the discontinuation of consumerist disposal of the old to make way for the new because of fashion dictates and other materialistic mindsets.
Have you taken an inventory of your closet lately?  Is it 90% professional clothing?  Do you have suits and ties for weekdays?  Is it chinos and button down Oxfords for the weekends?  Or do you have heavy duty work-type seasonal clothing that is suitable for your climate?  Do you have enough to layer in a cold climate with no household heating?  Can you protect yourself from the sun in the heat of the summer?  What about work boots?  Do you have a pair or two mixed in with your dress loafers?  Women, how many of you have heavy denim jeans?  I say this because women’s jeans are usually thin stretch denim and it is flimsy.  I know because I repair it!  Ladies, those high heels and flirty flip-flops that we all love are not going to serve you well in most TEOTWAWKI situations.  Neither are the flimsy tank tops that are so popular in summer.  Most of us do not wear them in the desert.  What is in your closet?  If you can’t imagine what you’d need, there are books, like Mr. Rawles’, that have fictionalized accounts of what a TEOTWAWKI scenario would be like.  Look around for people who work outdoors or farm; go into GEBO’s or whatever your farm supply store is.

I’d like to add one last thing before I begin my main topic.  I have no idea what I’m preparing for.  We, those of us who have a certain mindset about future possibilities, don’t know what the future holds.  We all have an opinion.  We think it may go this way or that way, but really, we don’t know.  Our job is to prepare, as best we can, for many different scenarios.  There are plenty of scenarios where we will all be blessed to just get out alive, never mind our extended wardrobe. There are others, like a long slow economic decline, where we simply have to roll up our shirtsleeves and do more with less.  There are plenty of TEOTWAWKI scenarios in the middle of those two.  If you are preparing, though, you need to prepare to have no new and maybe no new-to-you clothing options in the foreseeable future.

New clothing construction.  This usually begins with a pattern.  There are a few points to think about with patterns.  First, what kind do you want?  Well, IMHO, you want basic patterns for clothing that suits your area.  Pants, shirts, coats, jackets, hats, gloves, vests, the list could go on and on.  You can find a sewing pattern for just about everything, so if you’ve got an interest, look through the books and pick out patterns for additional items like luggage, organizers, tea cozies, etc., whatever suits your interests.  Just make sure you cover the basics first.  Also, if you are young, starting a family, think you may continue to add to your family, you need to consider the different stages of that child’s growth when looking at patterns.  Second, if I were you, after searching out the patterns that I like and want, then I would wait for a pattern sale.  Patterns can cost $10 to $15 these days, but most stores put patterns on sale regularly.  These sales used to be across the board, come in and get it sales.  These days, they have restrictions here and there.  Just educate yourself.  They all eventually go on sale.  Also, you can find many free patterns on the internet.  Granted, most of these are craft patterns, but you can find basic patterns too.

| Quick side note.  While tissue paper patterns have been around for a long time, they haven’t always been available. So what was the process before tissue patterns?  You can use newspaper, butcher paper, freezer paper (smaller items), muslin, or light colored sheets to make a pattern.  It is always easier to have a deconstructed item of clothing for this, but simpler garments can be traced without deconstructing.  You lay the garment pieces out on the fabric you are using and you trace around it.  You need to make sure that you leave enough for a seam allowance, usually 5/8 inch.  A basic understanding of clothing construction is helpful here.  Let me admit right here that the only time I’ve done this was in college.  Several of us in the dorm made matching sleep pants.  Two hours and lots of giggling later, we were done.  We used shoe strings for the waist, so I’m pretty sure that experience doesn’t qualify as “making my own pattern”.  So, I haven’t done this before.  If it interests you, research it.  However, one of my roommates could draw a basic dress on the fabric, cut it out and sew it up.  Many people can do this and they don’t all live in large cities.  Maybe you can find someone with this skill who is like minded enough to join your group.  Wouldn’t that be a great asset? 

Back to store bought patterns.  Patterns come in a range of sizes.  For example, women’s pants can include sizes 8, 10, 12, and 14.  You simply cut the pattern along the line that corresponds to your measurements.  And you need to have accurate measurements.  Sewing patterns do not always correspond to store sizes.  This is mostly a problem with women’s clothing, not men’s.  And, IMHO, you should buy a range of sizes from the smallest through at least extra-large in a range of patterns.  Example: my youngest son was tiny until the age of 14.  He is now the size of The Hulk.  Many women are different sizes from top to bottom.  A range of sizes is good. If you don’t want to have that many patterns, then just get the most basic clothing patterns in the widest variety of sizes.  For the more specialized patterns, you can be more size specific.  You might be able to barter with extra patterns, though, you never know.  Patterns are meant to be cut.  I don’t cut mine.  I trace them onto paper.  Besides having an aversion to cutting that pristine pattern, I don’t cut mine because I can be different sizes at different times.  I gain, I lose, I add pockets.  If you cut the pattern, it is cut.  I don’t cut mine. 
If you are going to sew new clothing, then fabric is the next step.  Useful fabric is probably another article all together.  I came from a small city of just over 200,000 and if you want to make a prom dress, no problem.  Most fabric stores sell craft fabric, home decoration fabric, and fabric for special occasion clothing.  Professional suiting (for women), fabric for Sunday dresses can be had, but the everyday hard wearing fabric is harder to find.  You can find home dec denim or denim for dressy skirts, but not hard wearing, “play outside” denim.  Since I haven’t lived in a really large city, I can’t speak to what is available there, but I don’t think it could be too different.  If I’m wrong and you live in a large city and can find good thick denim, canvas, thick flannels, strong thick cottons, then stock up and learn to sew.  Let’s not forget all of the other necessary sewing notions, either.  Thread, buttons, zippers, slacks closures, hooks and eyes, the list could be long, but it doesn’t have to be.  Stock the basics.  Now, here is the kicker, after four paragraphs, I say to you that, right now, new clothing construction is not cost effective.  I think in some scenarios, it could be…again, but right now, it isn’t.  There are just too many lower cost and more efficient ways to find clothing, such as thrift shopping.  I still stand behind what I just wrote, though.

So what were the previous paragraphs for?  You’ve got store bought patterns and sewing notions, now what?  Well, I haven’t sent you down the rabbit hole; I simply do not know what role clothing manufacturers or cloth manufactures will have in certain end times scenarios.  So you take those patterns and you read them.  This is how you learn about basic clothing construction and then, in turn, you learn about alterations and repair.  I find these two topics to be more useful for my continued efforts in prepping.  If what is ahead is a severe, deep depression similar to the 30’s, then it could be that fabric is affordable and store bought is not.  Sewing in any form will be a fundamental and much needed skill.

As I’ve stated before, I live in a small community.  I often work in a small quilting shop.  The owner will take in repairs and small, easy alterations.  We repair a lot of clothing here.  We sew up pockets, we hem new jeans, and we repair rips, tears, and wears.  For many in our community, they have no concern whatsoever about how a repaired item “looks”.  We can repair holes with a patch and the heavy and liberal use of the zigzag stitch.  If a pocket is ripped, most don’t mind if we put on a different colored pocket.  In my family of men, there are so many tiny holes in underwear and socks that can be easily repaired with a darning stitch or a zigzag stitch on the machine.  My daughter’s things have to be handled more carefully, but all in all, she’s not that picky.  My point is, when you find a rip, or a tear, fix it right then.  Don’t wait for it to get worse.  Sew it together with a strong stitch and be as neat as you can with it.  Don’t throw it away if the main part of the garment is still useful.  If you cannot wear it in public, then wear it at home or store it.  If the repair is major, get out a pattern and cut a new sleeve, or a new collar.  Use the patterns to fashion new pockets or cuffs.  I don’t know about you, but I cannot just wing something like that on the fly.  I need a pattern. 

Patterns will be very useful when altering clothing.  In any end-time scenario where people actually survive, you can pretty much count on losing weight.  Regardless of how much food you’ve stored, your supply is limited. You’ll ration your food.  Pair that with the absence of processed foods and you’ve probably got a significant loss of excess pounds.  What you also have is a closet full of clothing sized for your pre-TEOTWAWKI self.  Now, you can prep for weight loss and buy clothing in smaller sizes and store it.  You could go ahead and lose the weight now and that way you’d only have minor changes to make.  Still, your clothing is going to need alteration at some point.

I’ve thought about this portion of this article for a while now.  There is no way that I can write, describe, or illustrate all of the ways to alter clothing in this article.  So, what follows is a simple start to a much larger learned skill. 

The very best way to alter clothing because of weight loss is to deconstruct the item, cut them down and reconstruct them.  This is where those sewing patterns come in handy. Not many people will to want to do that. I wouldn’t do it unless the item of clothing needed to be severely cut down. 
So, if we are not going to deconstruct the item, then what?  Starting at the top, most shirts can be altered by simply taking in the side seams.  If the shirt has sleeves, then you probably will need to take in the seam of the sleeve as well. The seam is usually on the underside of the sleeve.  You can use pattern pieces to keep the shape of your garment.  Pattern pieces also will have the seam allowance already marked.  If you are a complete novice, break out the patterns.  Or, if you have some basic knowledge of sewing, then put the shirt on inside out and have a friend or family member pin (straight pins) the seams to the contour of your body.  You don’t want to do this too tightly.  Most clothing seams have a 5/8” seam allowance, meaning you sew your seam 5/8” from the edge.  You’ll need to consider that allowance as you pin.  If you need to take in the sleeves, pin the sleeve as well.  Take the time to mark it.  Any writing instrument will do, it doesn’t have to be a sewing marker.  These two seams will meet at the sleeve hole and will have taken up the necessary excess fabric in the sleeve hole.  Sew it up with a straight stitch.  I would suggest you try the garment on before you cut away the excess fabric.  If it isn’t right, that is okay. A straight stitch is easy to rip out.  Rip the seam and make any corrections needed.  Once you are satisfied, then I suggest you use a narrow zigzag stitch just inside the straight stitch to make the whole seam stronger.  Then you cut away the excess fabric.  It probably took me longer to type and edit this paragraph than the process actually takes, so don’t be intimidated. 

To make a small shirt larger, say for children who are growing, you could cut the side seams and add fabric to each side to the seam. Sew it up with a narrow zigzag stitch or a straight stitch.  Add fabric to the bottom of the shirt; add more fabric to the underside of the sleeve and you have a larger shirt that can see some more wear.  You can probably get at least another season of wear out of a shirt by using this technique.  Actually, since adding fabric at the seams is a style statement at the moment, you can find examples of this on the internet if you look.

Sleeves deserve a little extra attention.  Shortening sleeves? Not a problem. Most people can easily cut sleeves off and hem either what is left of the sleeve or hem the sleeve hole.  Pretty obvious and pretty easy.  Can you lengthen sleeves?  Well, if you don’t mind fabric that doesn’t match, then sure, you can lengthen sleeves.  You can add extra material at the shoulder seam or at the wrist.  Here is another time you can use the patterns that you’ve stored.  You can make a whole new sleeve by using the sleeve from a shirt pattern similar to what you are altering. If it needs to be lengthened, most patterns have a line where you can cut the pattern to lengthen it or fold it to shorten it.  Cut it out and sew it up.  Or, at the shoulder, use the upper part of the sleeve to make a pattern for the sleeve hole.  I’d use an inch or so in addition to your seam allowance of complimentary fabric and not even try to match the fabric of the sleeve.  Use a straight seam to sew the sleeve on to the new fabric. Pin your whole sleeve into the sleeve hole. If you have a pattern, follow those instructions. If you don’t have pattern instructions, then find the side seam of the shirt and pin to the seam on the underside of the sleeve. Do the same with the top of the sleeve. Once those two pins are in place, ease the rest of the fabric in on the curve.

You could also take the cuff off, if there is a cuff, and add fabric there.  Same procedure, you simply make a pattern from the end of the sleeve with the cuff off.  Sew the new fabric on and then reattach the cuff.   If there is no cuff, add one for extra length.  This is probably something that you would only do in a TEOTWAWKI situation.

The next obvious item of clothing that might need altering is pants or slacks.  If the waist needs to come in just a bit, then add darts.  Basically, to make a dart, you put your index finger in the back waist band and then using your thumb and third finger, press excess material to the front of your index finger.  You’ve done this a million times, so you know how to do it.  Pin it.  Once you have the clothing off again, pull the material together and smooth it into a long triangle on the wrong side of the fabric.  This is a dart.  Pin it and sew it up.  Make another dart on the opposite side in a similar place.  If you have a lot of material to take in, you may have to take the waistband off, take in the extra from the center seam in the butt. You’d also have to take in the waistband and that will involve removing a belt loop or two and the pockets as well.  This may be worth it if you have nothing else to wear, but it is a pain otherwise.  For general resizing in the hips and thighs use the inseam. If you are sizing jeans and the inseam is a double hem, then I’d just cut that off and make a flat seam.

After all of that, hemming the length of the pant leg is a breeze. Get a friend or a family member to pin them and sew with a straight stitch. If you need to hem more than an inch, consider cutting the material off leaving enough for a 5/8” seam.  You’ll want to turn the raw edge and then turn it again for the best results.

That is a very basic description of alteration for basic clothing. I didn’t cover altering a suit or a prom dress or any other kind of dress for that matter.  I don’t really consider those items important after the ball drops. I don’t think any of the readers on this site would either. If the world is truly gone, then I’d cut up those wool suits and make quilts out of them (you can’t wash them, but they are WARM). I’d use the softer prom dress type material for sleepwear or underwear for women or children.  You also may need to cut adult clothing down to child size.  Another good reason to have patterns on hand.
I have a final observation about Americans and clothing.  I said above that I do believe in charity and I do not advocate discontinuing that practice.  I don’t know about you, though, but the images of the mountains of clothing dumped on Sri Lanka and other areas affected by the Christmas tsunami in 2004 was eye-opening for me.  As Americans we have SO MUCH that we sent it to those people by the container full.  I think it was a wonderful testament to the giving hearts of most American people.  But!  Most of it was not usable in their tropical climate.  I read that much of it was destroyed.  The people there could not use it and they could not deal with the onslaught of all of that clothing.  So, I urge you to look at clothing that you might give away with a more discerning eye.  Absolutely donate your professional clothing!  If an item is in pristine condition, someone will be thankful to receive it.  But I know that in our little church clothing room, I receive far more articles of clothing that are stained and ripped than those that are pristine.  Many organizations will not put these clothes out at all.  They destroy them.  But, if you do not donate them; if you mine those clothes for zippers, buttons, collars, cuffs and any number of embellishments that clothing companies use, then that clothing won’t be wasted.  You can either deconstruct the garment completely and keep the pieces organized, or just store the shirt.  You can also use the deconstructed garment to make a pattern if you missed those pattern sales that I told you about.  You’ll be tempted to say that you cannot possibly store one more thing.  I agree.  Storage is a problem for all of us, but buttons and zippers don’t take that much room.  Find a way to store at least some items because you will need them.  And before you throw away the body of the garment, could you use it for a blanket or quilt?  Could you use it for cleaning rags or even bandages if it comes to that?
So, my suggestions are:

  • Learn about sewing or better yet, learn to sew.
  • Stock up on patterns, material, and sewing notions that will be useful in a survival situation.
  • Learn to keep your basic wardrobe in good repair.  Learn to alter clothing.
  • When going through your closet, keep in mind emergency/survival scenarios.  Do you have the clothing necessary to keep you covered, cool and/or warm enough in any type of situation?
  • If the clothing that you seek to remove from your closet would be useful in a survival situation, do not throw it out or donate it.  If it is too small, it won’t be after the ball drops.  It may be something that you could barter with.   Good, heavy duty clothing will be a gold mine.  If it is not in good repair, repair it yourself or have it repaired while you still have professionals who can and will repair and alter.
  • Lose the bulk of the extra weight now.  It is just easier that way.
  • By all means, donate your professional clothing to charitable organizations, but the items that are too ripped, or worn, or stained to donate should be mined for usable parts.
  • On February 8th, 2013 Mr. Rawles posted an article to Survivalblog called “Industrial Sewing Machines for Prepared Families”, by Lockstich.  This is really an excellent article.  Obviously, if you don’t have a sewing machine, then that article is the place to start.  Get a good machine.  And then learn to use it!