Edgebrook Bank, IL, Closed by Regulators – Fifth Bank Failure of 2015. – G.G.
o o o
AIIB, SDRs, and the Yuan – Latest Developments. – JMC
o o o
By a 2-to-1 margin, Americans are more worried about economic mobility than the income gap
Record number of Americans abroad giving up citizenship. – G.G.
o o o
What could possibly go wrong? “Most Of The Existing Workers In The Saudi Oil Fields Are Yemenese. And There Are Over 4 Million Yemenese In Saudi Arabia”. – H.L.
o o o
An excellent post on Ron’s outdoor blog about gun care products. – TMG
o o o
SurvivalBlog reader T.J. sent in this reminder about the safety of your storm shelter: Woman Drowned In Her Storm Shelter
o o o
Bills Will Shield Police Officers From Their Own Body Camera Recordings. – T.P.
“And it came to pass, as he went into the house of one of the chief Pharisees to eat bread on the sabbath day, that they watched him. And, behold, there was a certain man before him which had the dropsy. And Jesus answering spake unto the lawyers and Pharisees, saying, Is it lawful to heal on the sabbath day? And they held their peace. And he took him, and healed him, and let him go; and answered them, saying, Which of you shall have an ass or an ox fallen into a pit, and will not straightway pull him out on the sabbath day? And they could not answer him again to these things.” Luke 14:1-6 (KJV)
Today, we present another entry for Round 58 of the SurvivalBlog non-fiction writing contest. The $12,000+ worth of prizes for this round include:
First Prize:
Second Prize:
Third Prize:
Round 58 ends on May 31st, so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how to” skills for survival have an advantage in the judging.
After looking at various sources for deep well hand pumps for use in an emergency and noting that the price (some being over $1,000) was out of line for me, I decided to make my own unit. My static water level is about 65 feet, yet I was able to construct a workable unit using schedule 40 PVC plastic that cost me about $80. It’s amazingly easy to build and will pump a five-gallon bucket of water in about three minutes. So, if you decide to make one, here’s how I did it.
Your well casing should be 5” or more, or you may not be able to get past the pitless adapter with the pipe. I recommend disconnecting the electrical source to the pump by tripping the breaker before continuing.
Take off the well cap to find how far it is from there to the water level below. (This is the static level; see the note below.) If it’s no more than 70 feet, then this pump will work for you. Beyond that, it may work for another 10 feet or so, but more effort is needed to obtain water when you pump.
Using a flash light, look at the pitless adapter, which is a few feet down. You will need to determine if you can get a 1¼-inch schedule 40 PVC pipe, with a coupling and foot valve on the end, past the adapter. Just use an eight foot piece of the PVC with a male threaded coupling glued on the end to which you will attach a brass foot valve. You will need to file or grind off the hex nuts on the coupling. If it goes past the adapter, you’re on your way.
Next, you will need to bore, or drill, a hole in the well casing cap for the pipe to go through. Hold a short piece of the 1¼-inch pipe on the cap where you want the hole to be. (It should be above where the pipe will pass the pitless adapter.) Then, scribe a line around that. Remove just to the line. We do not want a coupling to pass through this hole; only the pipe! Check that the piece of 1¼-inch pipe will just go through the hole. A pipe coupling will sit on top of the well cap and hold the entire unit in place when installed, which is why the hole has to be accurate.
When installed the foot valve should be submerged about six feet in the water, so you will need enough 1¼-inch schedule 40 PVC pipe for that length, plus the static level of the water, plus about four feet extra. For example, if your static level is 50 feet, you will need to purchase 50 + 6 + 4 feet of schedule 40 PVC pipe. I used 10 foot sections of pipe, and that worked well. Get the same amount of ¾-inch schedule 40 PVC pipe, which will form the piston. Figure how many couplings you’ll need for each size of pipe, and buy extra ones in case you need them.
I sanitized each piece by putting the foot valve, all couplings, T’s, and elbows in a bucket of bleach solution, and soaking them for awhile. Then, I placed them on a clean towel to dry and covered them until they were needed. The inside of the 1¼-inch pipe and the outside of the ¾-inch will be sanitized after installation, as I will explain later.
For your layout, place the piece of 1¼-inch pipe (with the foot valve attached) near the well casing so that it is pointing out in the direction you want the layout to go. Keep it all off the ground using saw horses, ladders, chairs, or whatever. Be sure to use the proper primer and glue for PVC, and then glue all the 1¼-inch pipes together, EXCEPT (pay attention, as this is a Very Important Point) do not put glue on the end of the pipe that will come up through the well cap (the last pipe from the well on your layout)! Hold off on putting glue on the top coupling yet!! First, slide the well cap through the hole you made, with its bottom toward the well, and THEN glue on the last coupling– the one that will sit on the well cap when it’s in place.
An hour or so after the glue has set, you can sanitize the outside of the pipe with a solution of bleach water and a clean rag. Use clean hot water to rinse off the bleach residue on the part that will be submerged, if you want. Anyone who will touch the pipe now should thoroughly wash their hands first. Slowly begin feeding the pipe down the well. In order to keep it off the ground, about three people should walk with the pipe as it advances. (Watch that the well cap doesn’t slide down and hit your hand or head!) Attach the well cap to the casing, and trip the breaker if you want.
Look at the enclosed diagram for the 1¼-inch above well cap set up. Glue this up, except item 1 & 2, and install it in the coupling on the well cap. Allow the glue time to set.
Now, for the ¾-inch piston. (See notes below) Glue on a flat type cap on one of the 10-foot sections. Then, glue up the remaining sections, keeping it all off of the ground. You can wash this layout with a little soapy water. On the top piece of pipe, drill a 1/8 inch weep hole about seven feet down on it so water will drain and not freeze in winter. Allow the glue to set for an hour and insert this layout into the 1¼-inch pipe. Let this pipe to rest on top of the foot valve, and extended about a foot out the top of the unit for now. We’ll cut it off to proper length in a minute or so.
Insert a plug in the water outlet elbow but don’t glue it, and carefully pour a bleach solution in the 1¼ inch pipe untill it’s full. Let this remain for at least a couple of hours, in order to sanitize the unit. Now pour the ¾-inch pipe to about ½ full with the solution, as this will make it easier to pump up and down.
Pull the ¾-inch pipe up another three inches, and mark a line on it level with the 1¼-inch pipe opening. Pull it up a few more inches, and cut it off at the line. Don’t let go, or it will drop below the opening and you may have to remove both pipes to get it out. Make sure it’s dry, and then glue on the handle. Keep the pipe up so that the handle isn’t supporting the entire piston for at least 45 inches. You can then remove the plug and pump out the bleach solution. When doing the pumping action, try to go as straight up and down as possible.
In the layout of the pipes, make sure your ¾-inch pipe couplings will not be coming through any 1¼ connectors on the upswing to eliminate a possibility of a snag. I actually laid out the 1¼-inch pipe on the ground butted together, then laid the ¾-inch pipe beside it to visualize the up stroke of the ¾-inch pipe, usually 1-3 feet. Also, If the weather is very cold, the pipes may not be very flexible; pick a day of say 60 degrees or so. Keep the well casing covered while the cap is off to prevent insects or debris from dropping in. Static level can be determined by using fishing line with a steel nut tied on the end and a bobber tied about two inches above the nut. Lower the nut until you feel the slack, and then mark the line. Pull out and measure from the nut to the mark.
### – The Hex nuts on the male coupling that holds the foot valve will need to be removed so it will go past the pitless adapter. Grind or file them off.
*** – This bushing will need to be filed out with a round rasp file to the point where a ¾ inch pipe will slide in and out easily, but not sloppily.
HJL,
I want to point out one thing J.B. might have overlooked. Part 97 of the FCC’s rules governing Amateur Radio allow the government to suspend privileges in an emergency. While they can’t turn off the airwaves, there are things they can do:
Also remember that Amateur Radio is NOT private. Anyone can legally own and operate a receiver, and coded transmissions are forbidden except on designated frequencies and for Morse code only.
What you might choose to do after WROL is up to you, but depending on the circumstances the above might still be possible. – F.K.
Gardening season is upon us already and SurvivalBlog would like to hear from you. What percentage of household food do you produce from your own garden? Let us know this weekend and we’ll post the results on Tuesday.
This is a Major Buy Signal for Gold
o o o
o o o
Items from Mr. Econocobas:
Oil Price Recovery May Be Too Much Too Soon – This is an interesting read for sure.
Part-Time Jobs Soar By 437,000; Full-Time Jobs Tumble, Stay Firmly Under Pre-Recession Highs
Video: How Will Fed React to Jobs Data? – Rick Santelli puts it all in perspective here at the end.
A useful map for those considering moving: Here’s Where in the Country You’re Most Likely to Become a Victim of Violent Crime. – JBG
o o o
After Nearly Claiming His Life, Ebola Lurked in a Doctor’s Eye. – D.S.
o o o
Tracking kids via microchip ‘can’t be far off,’ says expert. – G.M.
o o o
Bedtime Reading to Kids “Unfairly Disadvantages” Others . – S.D.
o o o
Battle erupts over censorship of 3D-printer gun plans. – H.L.
“If they confess their iniquity and the iniquity of their forefathers, in their unfaithfulness which they committed against Me, and also in their acting with hostility against Me— I also was acting with hostility against them, to bring them into the land of their enemies—or if their uncircumcised heart becomes humbled so that they then make amends for their iniquity, then I will remember My covenant with Jacob, and I will remember also My covenant with Isaac, and My covenant with Abraham as well, and I will remember the land.” Leviticus 26:40-42 (KJV)
May 8th is the birthday of missionary and U.S. military intelligence officer John Birch (born 1918, died August 25, 1945). He is considered by many to be the first American casualty of the Cold War.
o o o
Seed for Security is running a great sale. Their Super Survival Pack is now 20% off. It’s a total of four pounds of survival seeds and two pints of healthful grains, all packaged for long-term storage. Their seed is heirloom, non GMO, and none is hybrid. This offer is for a limited time.
o o o
Today, we present another entry for Round 58 of the SurvivalBlog non-fiction writing contest. The $12,000+ worth of prizes for this round include:
First Prize:
Second Prize:
Third Prize:
Round 58 ends on May 31st, so get busy writing and e-mail us your entry. Remember that there is a 1,500-word minimum, and that articles on practical “how to” skills for survival have an advantage in the judging.
My experience in survival preparedness has spanned roughly a decade now, from my early 20’s into my early 30’s. I have learned a lot along the way and would like to share my experiences, varied as they are, on many subjects. These are only my opinions. Your individual circumstances will vary; you can take from this what you will and ignore the rest.
The number one most important survival consideration is that NOW, while money is worth something, you had better get HOT on MAKING MORE MONEY. Ten years ago, I was absolutely convinced that the financial system was imminently going to implode. Therefore, instead of investing money and time into being able to expand my own financial growth, I poured every spare penny into weapons, ammunition, equipment, et cetera. These are all things that are useful, but in the long run I did more harm than good.
Although we all know that one day the reckoning for this world will come, the game can go on much longer than anyone can imagine. It is their system, and they will keep it going as long as they can keep looting this country and destroying it from within. This could take another 10-20 years. We just don’t know. So always invest in yourself, in new skills, in new businesses, and in your capability to generate money. Have a second job, learn a trade, and just increase your income somehow. Preparedness becomes so much easier when you are making $10,000 a month instead of $3,000. Spend a year or two right now creating that larger income stream for yourself and you will suddenly be able to afford the best weaponry, optics, free dried foods, gear, and more. Skills can always defeat equipment, but when you have enough money to buy the best equipment and also go take excellent training, you are going to be an order of magnitude better off. Money opens up a lot of doors.
Most of the people reading this blog are probably men. Guys, survival is not just about having an arsenal that the terminator would be envious of; it is also about having a life that you love. This means having companionship, a wife, kids, and a legacy. Our individual lives are not that important in the grand scheme of things. This is going to sound like it has nothing to do with survival, but hear me out. Go take dancing lessons. Yes, dancing lessons are imperative to your survival situation. A man who can dance salsa is going to be able to attract a woman ten times easier than a man who can’t dance. Good luck finding a mate by preaching about Austrian economics and derivatives. This can come later, once she knows you are a fun and happy go lucky person who keeps her laughing. (Save the Rambo persona for the cannibal raiders down the road.) Ensuring the survival of our way of life means having children to pass our values and culture on to, and you need a woman to have your children.
So, do yourself a favor and find out where you can learn salsa. Then, go find yourself a mate. Absolutely do not bring up guns, politics, or preparedness until you can ease her gently into it. Women are wired differently than men, and it behooves you to approach these topics very cautiously, as not to upset her idea of what the future might be. Women fall in love with an idea. If her idea of life with you is nothing more than living in an underground storage container and eating beans while repelling cannibals, well guess what, she is going to pass that idea up for another idea.
If you think that working out at the gym a couple of times each week is going to be the same as living off the land and building a community, you are absolutely going to be in for a physical and mental shock. I have personally gone from working a construction job and going to the gym five times a week to working on an oil rig for 28 straight days with 12-hour shifts every day. I thought that I was in shape and strong, but what 95% of the population considers to be hard work is a walk in the park. I realized this when I went to work on the oil rig.
Our ancestors would spend all day long tilling the earth, day after day. They would swing an ax, swing sledge hammers, split wood, haul heavy equipment, and do this from sun up to sun down. Their bodies were conditioned from a young age to work for the entire day. This probably prevented them from a lot of injury, but for all the rest of you who work regular office jobs, your body will be prone to injury when you make this transition. I wanted to tell you about different types of pain, because you are going to become familiar with pain, and it is good to have an idea about what is serious pain and what is not.
You will deal with muscle soreness, naturally, being the most mild pain of them all. After the soreness will come aching joints, from your fingers to your wrists, and especially your knees. Aches can get pretty uncomfortable, but you should never worry about aches, because they will go away with some good food and rest. The harder you work, the more you must eat. You absolutely must follow that rule. The body can withstand a tremendous workload as long as you are fueling it with plenty of calories and nutrition! That cannot be emphasized enough. You will begin to fall apart if you do not heed this advice.
Stabbing pain is something more serious, and it is likely from some kind of injury. I can only assume you will not have a doctor around or access to any real medical care. So you have to be able to function-test your body. This means that you basically check for range of motion, and if something is giving you stabbing pains, then you just need to stop aggravating it or you will run the risk of truly injuring yourself. Restricting movement or supporting it somehow with improvised braces or supports can help.
What you must be in the habit of is the proper and safe way to use common tools. For example, you must be in the habit of properly positioning your body so that when you swing that sledge hammer and it glances off whatever you were trying to hit, it doesn’t clip your knee cap on the way down and cause an actual injury. I cannot tell you how many times I have seen people do exactly that. Just imagine you are on your retreat, where you have been splitting wood for eight hours straight, your hands are aching terribly, your muscles are exhausted, and you are mentally about to quit, and your ax slips out of your hands and cuts your foot wide open. Toughening up for hard labor is not a fun thing to do, but get in the habit of using your tools safely, at a minimum!
With the best intentions I have pretty much tried every method of food storage that you can think of. I have settled on freeze-dried food stoage. The other methods I have found to not work for me for a few reasons:
There are a thousand idiots out there giving advice for every real professional you might find. Do yourself a favor in the beginning and read the book On Combat. This will drive home the importance of reality-based, stress-inducing training. Weapons are secondary to training and tactics, period. As long as you have a reliable weapon that you will be mentally prepared to aggressively use, then you will do better than all the arm chair commandos who only ever shoot at stationary paper targets on a flat range on a nice sunny day. I own a non-standard rifle– the Steyr AUG– and all my friends always tell me that if I get into a SHTF situation I won’t be able to find parts or whatever else. That’s not true. There will be so many corpses with AR15s laying around that if I need another gun, I will pick one up. I have met countless morons with weapons, zero training, and zero combat mindset. The ground will be littered with unfired rifles.
For hand-to-hand fighting, just go right to www.scars.com and subscribe. Practice it with your team. My good friend is an expert in the system, has been in hundreds of real life fights on the street as a cop, and never lost a single fight, period. I am skilled at an intermediate level and still surprise others trained in the more well-known systems, with the simplicity and effectiveness of SCARS. You will find a lot of negative stuff about it online, but that comes from ignorance. It has the fastest learning curve, most scientifically-developed concepts, and trains the mind and not just the body. To give one sentence that sums up why SCARS is the best: There are no defensive moves in SCARS, only offensive movements.
So, to sum it up, make more money, dance yourself into the arms of a good woman, work hard like your ancestors, train for reality, and study combat.
HJL,
It looks like there is a differing view that counters the story you linked to… Facts matter!. – D.S.
HJL Responds: There is always more than one side to any argument; this one is no exception. However, the author of the “Facts matter!” article that you are referencing, while making the accusation that the original author is twisting “the facts” to suit his purpose, does the exact same thing. Given both articles, here are my concerns:
If it’s not obvious here, I’m having trouble with the idea that Sorenson tells its clients that they will hold their client’s data confidential and then releases enough information to law enforcement to suggest that a warrant may be authorized or that they would run the test in the first place without a warrant.
Denmark moves closer to a cashless society. – G.G.
o o o
Why The Student Debt Bubble Is About To Get A Lot Larger
o o o
Items from Mr. Econocobas:
PETER SCHIFF: We’re Not Headed for a Fed Rate Hike — QE4 Instead
Layoffs Hit 3-Year High in April as Energy Cuts Surge
Hold Precious Metals As Banks Try To Criminalize The Use Of Cash
The modern paramilitary police and how we got here: SurvivalBlog reader D.C. blames FLETC for turning our nation’s local level police forces into paramilitary death squads after seeing them first-hand on flights in and out of Roswell, NM heading to and from training in Artesia, and hearing the chatter amongst themselves. “The .gov folks talked amongst themselves at the airport of actively recruiting local agencies to send police officers to receive the training. The trainee officers seem very boosted in morale by the training, and their chatter is confident and not unlike that seen among school team athletes.” – D.C.
o o o
SurvivalBlog reader D.B. sent in the link to this website with many useful online books that look like they are from the early 1900’s on many subjects like “Agriculture for the beginner”, “Practical blacksmithing”, and many others like this. You just have to scroll down past the construction tutorials to get the online books.
o o o
Homeschoolers interrogated on guns, vaccines. – D.S.
o o o
Mapped: One-in-five murder victims in world is Brazilian, Colombian or Venezuelan. – JBG
o o o
War is coming. – P.M.