Category: Weapons

Letter Re: Soda Vending Machines as Gun Vaults

James Wesley: For use as an unobtrusive and inexpensive alternative to purpose-built weapons safes, I recommend finding an old, non-functional soda vending machine. Remove the guts (we call it the ‘stack’) and refrigeration system, but leave the lights in the door. (Be careful, the light ballast wiring will bite: 5,000 volts).   Tap into the 110 Volt AC wiring on the vending machine to power your Goldenrod Dehumidifier.   Store your valuables inside where the guts used to be.  Lock the door and keep the key.  [If it will be at your private business but in a location that might …


Introduction To Multi-Caliber Guns by J.S.

There have been dozens of articles on survival firearms on SurvivalBlog, and many of them focus on the “bare minimum” and/or doing the most with the fewest firearms.  None of us wants to fall into the trap of over-emphasizing firearms at the expense of food, water, arable land, and other supplies for balanced preparation.  We all know of “that guy” with 100 guns and a case of MREs who considers himself prepared for anything.  This is especially important when you’re looking to bug out WTSHTF; it’s very difficult to reconcile leaving firearms behind and, say, 50 long guns + 50 …


Melting Lead for the Meltdown, by Charles J.

As an avid competitor in IPSC and local pistol competitions, a number of years ago I decided to reload ammunition on my own.  I felt this would pay for itself over the long haul as well as allow me to work up loads that would have the correct power factor, accuracy, and excellent feeding for competitions, not to mention self-defense.  In addition, after the passing of the Brady Bill, I took on another task of casting my own bullets with the possible specter of either the government removal of ammunition from store shelves or some other legislative means of taking …


Letter From Mike Williamson Re: No-Name AR-15s

Dear Jim, To add to Pat Cascio’s comments on AR rifle construction, I thought I’d share the following: This document explains the criteria. This chart puts them all together One of the very critical components is the buffer tube on carbines.  The aftermarket tubes are of 6061 aluminum, versus 7075, and are milled, rather than being hammer-extruded.  They are about half as strong as mil-spec, and have less gripping surface on the threads.  This is probably one of the most critical areas of failure on the rifle. Please note that Knight’s Armament is not mentioned on this chart, but they …


Mike Williamson’s Product Review: Triple Eight Professional SurvivIt Tool

SurvivalBlog readers may recall that I’ve previously tested the Triple Eight Professional SOL Knife.  The 888 SurvivIt Tool is more versatile, and a bit more robust. The blade is AUS8 steel, and the handle is epoxy-painted steel.  It’s assembled with machine screws and good quality pivot and fittings, so maintenance and repair is easy, though I don’t expect it will need much. The edge was not quite as sharp as I like, and I had some trouble cutting leather thong with the hook.  The serrated section, however, as short as it is, zips through heavy nylon, leather and plastic easily. …


Four Letters Re: Homemade Powder Solvent For Gun Cleaning

JWR: There is a great reference for barrel cleaning and break-in procedures that is available free on web, courtesy of Krieger–a well known barrel maker. It is a reference worth printing out. – J. McW. Jim, Just a quick note on the letter about home made gun solvent. He mentions that “All of these solvents comes in colored glass to keep out sunlight.” He goes on to mention hard liquor bottles as a possibility. My problem with them is their size. You can get the “pocket flask” but most often you see 750 ML and 1.5L bottles. Common old beer …


Letter Re: Homemade Powder Solvent For Gun Cleaning

Sir: I’m a benchrest shooter and gunsmith, and I use quite a bit of cleaning solvent. When I used to buy it, I would buy it by the pint bottles. While not terribly expensive, it was still a cost. I asked fellow shooters what they used and most did as I did, buy it. Then I asked a very successful shooter what he used and he said “my own brew”! Just what I wanted to hear. He was nice enough to share his brew mixture, and that is all I’ve used since. There are a couple main things you’re trying …


Jim’s Product Review: Bed Bunker Gun Vaults

One of my consulting clients recently bought several Bed Bunker gun vaults and I had the chance to examine them. This product is an unusual horizontal home gun vault design that replaces your bed’s box springs. These vaults have two major advantages: 1.) They don’t take up any more floor space than your current furniture, and 2.) They will probably be overlooked by most burglars that are in a hurry. (And statistics show that most burglars are in a hurry. Typically, they are in a house for less than five minutes. The bad guys can’t attack a safe if they …


Understanding Metric and Inch Bore Dimensions

I often have blog readers and consulting clients send me questions about firearms calibers. They are often confused, but this not always their fault. It is a confusing, complex, and often arcane topic. A lot of the facts that you will find are mere trivia, but since safety is an issue–(we mustn’t fire the incorrect ammo in our guns!)–it is important to study. To begin: Metric caliber designations are usually written with an “x” in the middle to distinguish the bore diameter and case length. For example, the 6.5×55 designation tells us that the cartridge uses a 6.5 mm bullet, …


Two Letters Re: Assuring M1911-Series Autopistol Safety

Mr. Rawles, While I agree, of course, with Steve V.’s assertion that firearms need to be handled safely, people should be familiar with their firearms, and training is a good thing; I very much disagree with the assertion that operating the slide of an automatic pistol the correct way is “an extremely bad habit”. First, his complaints about what happens when racking a slide with thumbs on opposite sides of the slide and facing opposite directions aren’t very valid in my opinion. The notion that a shooter’s hand and arm conceal the pistol making it “hard to see exactly where …


Letter Re: Seeking Advice on Household Moves with Firearms and Ammunition

Sir, What advice could you give for moving one’s store of firearms and ammo a considerable distance in a relocation within the continental Unites States?  I am in one of the reasonably free northern New England states and figure that if I can make it through New York state without being stopped I can breathe a relative sigh of relief.  Still, I envision a scenario where the vehicle with the supplies is never left unattended.  And if I had to make this move alone I would consider doing so in a motor home so that I would only have to …


Letter Re: Cold Weather Patrol Tactics and Techniques

Dear JWR: Regarding the recent Cold Weather Patrol Tactics and Techniques article, just one note about condensation prevention from bringing a cold weapon indoors. Packing or leaving a heavy duty garbage or similar bag outside and placing your weapon inside the bag can greatly reduce condensation from the indoor climate. Just place your weapon completely inside the bag. I like to compress the opening in my hand like a balloon opening and instead of blowing into this opening, I suck as much air out as I can with my lungs. If two or more deep inhalations are required to remove …


Letter Re: Advice on Obtaining an FFL

Dear James,   Thank you for all that you have done for millions of us who were once asleep and unprepared!   I had a question for you regarding obtaining a Federal Firearms License (FFL).  I am in the process of starting some home businesses as a backstop to my “office job.”  I have considered getting a FFL and Class 3 license to generate income from gun and ammo sales out of my home.  Is this advisable or does this make me too “high profile?”  I remember the movie Red Dawn!   Thanks and I wish you and your family a Merry …


A Rookie on the Range, by Lew B.

Greetings fellow SurvivalBloggers.  Any of you who read my piece “How I Woke Up” may recall that I started my awareness and prepping in August of 2009.  Today I wanted to touch on my limited knowledge of firearms, and what I’ve done to start firming up that area.  Up until six years ago, I had never owned or fired any kind of weapon other than slingshots and pellet rifles as a child.  I dabbled in archery as a young adult, but wasn’t the guy splitting arrows on the bulls-eye.  But then something happened six years ago that changed that.  I …


Hunting Rifle Selection for Big Game: Plain and Simple Basics, by SplitHoof

Recently I have been asked by a number of friends and associates for specific recommendations on the selection of suitable rifles for hunting big game (including feral hogs, deer, problematic black bears, etc.). Rather than spending considerable time conversing with everyone on an individual basis through a whole bunch of e-mail messages, I will offer some of my own brief personal observations as a starting point, and then will be glad to answer any additional questions for those who may be so inclined to ask.  I must make it perfectly clear from the start that I do not consider myself …