Letter RE: Some Points About Pistol and Rifle Magazines and Their Springs

Sir: Over the years I, like all shooters, have heard theories on magazine springs and how to treat them. A few years back I took a tour of the Sandia National Laboratories and I spoke with a metallurgist who was also a shooter and he had some noteworthy insight on the issue. As he said, “if the spring was made of the right materials and heat treated properly, leaving it loaded will not cause the spring to weaken.” Leaving a spring compressed will not weaken it, it is compressing and relieving the spring a lot that causes them to weaken …




Letter Re: Assessment of Coach Guns?

Mr. Rawles; What do you think of the double-barrel coach gun as a weapon for less-frequent shooters? I’m thinking this might be a good choice to give to the older lady next door, or the wife who doesn’t shoot as a hobby. It’s easy to use (few controls), intimidating, and has manageable recoil, when used with the right buckshot loads and possibly a quality recoil pad. – John in California JWR Replies:  Coach Guns (a.k.a. side-by-side double-barreled shotguns or “luparas“) are an antiquated design, but they do fill a couple of useful roles in a retreat firearms battery. Their greatest …




Letter Re: Some Points About Pistol and Rifle Magazines and Their Springs

JWR – Recently had a few realizations about magazines (the weakest link in any semi-auto firearm): Even though I regularly rotate my magazines, I have discovered that the Glock G30 [compact .45 ACP] magazines have taken a set. [Their springs became weakened, under compression.] They are 10 round magazines, which I was only loading to 9 rounds and rotating every 30 days. While I ALWAYS download magazines to preclude the maximum compression of the spring from overwhelming the loading energy of the slide/bolt going forward, the extreme compactness of the G30 magazines is apparently more than the springs can take. …




Letter Re: What is The Big Deal About Pre-1899s and 80% Complete Receivers?

Jim – I guess I am thickheaded and missing something here. What difference does a pre-1899 or a 80% finished firearm make? Are you trying to tell me that the jackbooted thugs of the ATF will stop, examine the rifle, determine that it is legally not a firearm, and not steal/confiscate it from you? Got it, no 4473/record of it, but neither is there one between private individuals either, so why pay $120 for a pre ’98 barreled receiver, when I can get a complete working Mauser for that? I’m not trying to be ugly here – just really don’t …




Letter Re: Survival Gun Selection

JWR: As to your post on “Survival Gun Selection” in reference to having spare parts. If you have one or two of the same “tool” and have spare parts, it would be best to check that the spare parts fit. Make sure they both fit and function. It would be best to do your fitting beforehand whenever possible. Richard, KT Ordnance JWR Replies: If any of you readers have not yet visited the KT Ordnance web site, then you should.  Richard sells gunsmithing goodies with an interesting angle: He makes 80% finished rifle and pistol receivers, as well as jigs, …




Survival Gun Selection

In my survivalist novel “Patriots”, I included lots of descriptions of firearms used in various situations in order to illustrate that there is no single “perfect survival gun.” Different situations are best handled by using different firearms. There are several requirements that must be considered in selecting guns for use on a farm, ranch, or survival retreat. First, and foremost, they must be versatile. A single gun might be pressed into service for shooting crows or starlings at 10 yards, rabbits or coyotes at 100 yards, or rattlesnakes at five feet. While there is no single gun that can handle …




Letter Re: Finnish Mosin Nagant 7.62x54R Rifles

Jim: Regarding the Finnish Model 1939 Mosin Nagant 7.62x54R Rifles being sold by AIM Surplus (See: http://www.aimsurplus.com/acatalog/copy_of_Finnish_Model_1939_Mosin_Nagant_7.62x54R_Rifle.html) I was wondering what you thought of this rifle? Thanks, – Straightblast JWR Replies: Those are fine rifles, and the Russian 7.62×54 Rimmed cartridges (the same rounds used for the Dragunov) are cheap, fairly plentiful (mainly corrosively primed military surplus loads, however) and it hits about as hard as .30-06. The biggest detractor is that sporterizing parts for Mosins are much more limited than for Mausers. Rechambering is also more difficult. Quite a few of the Finnish M1939s were re-arsenalized using pre-1899 actions. …




The Best Pre-1899 Bolt Action?

I strongly believe that every prepared family ought to have one or two Federally exempt pre-1899 guns. Why? There may come a time in the near future when legislation will dictate nationwide gun registration.  But pre-1899s will presumably be exempt. To explain: Guns made in or before 1898 aren’t classified as “firearms” under the Federal law. They haven’t been, ever since 1968.  They are outside of Federal jurisdiction. Because of their very small numbers, in the eyes of legislators they are a trivial “non-issue.”  In the envisioned era that you are forced to either bury or register the rest of the …




Letter Re: Publication Recommendations?

Dear Sir, I caught your blog via www.savvysurvivor.com and saw some interesting comments. I am a metro-area person with family, and have interest in personal protection issues. We have a moderate supply of food, numerous firearms (I’m focusing on .22 [Long Rifle], .30-06, .30-30, and .45 [ACP]. I am a concealed carry permit holder in Minnesota. I think I am moderately capable in firearms (a Minnesota Department of Natural Resources instructor) and have two sites that I could move to. Can you refer me to any publications which might enhance my knowledge? (Yes, I can skin deer, etc.) I’ve interest …




Letter Re: Recommended Firearms Training Videos/DVDs?

Hey Jim, First, I’ve been reading your blog since late August (almost from the beginning) and have read “Patriots” (stayed up all night to do so). Consequently, I’ve begun collecting beans and bullets. Thank you for your influence and information. Second, ideally I know I should attend training for combat/tactical shooting. Realistically, however, that’s not going to happen for me. In lieu of on site training, do you recommend video training? If so, what do you recommend and what do you not recommend?  Thanks again for the information and influence you provide. Best Regards, – Doug JWR Replies: They are no …




The Viking Method of Semi-Auto Handgun Clearing and Loading, by Shooter

Hello to all the Survival Blog readers! My name is ‘Shooter,’ and I came across this blog one day looking for information on the novel “Patriots”. Actually, I was hoping to find a sequel, or even a second novel, by Mr. Rawles. Instead, I found a great tool to better prepare for when the oscillating air disruption machine dices the Schumer. I wrote James hoping to have my own blog linked here, and found that he had an interest in what I had to say. My contributions to this site will revolve around tactical handgun training that I have received …




Letter Re: Recommended Spare Parts For AR-15s and A Planned Move to Wyoming

Great site Mr. Rawles! I view it most every day. Have also passed your book (“Patriots”) on to two friends after having my two sons read it. I have a general question for your readers. I just purchased a Bushmaster .223 [AR-15 clone] with Eotech site system. I am wondering during a TSHTF scenario what parts to this weapon should I have in backstock? [JWR’s replies are in-line, in bold.] Ideally, it would be best to a have a complete spare carrier assembly, to provide a quick “in the heat of battle” replacement in case you break a firing pin …




David in Israel on Glock Handguns

James: I must agree with the previous poster, after becoming expert at diagnosing and smithing the Model 1911, I finally went the polymer gun way. A Glock will massively outlast a steel firearm–take abuse like an AK but still shoots accurately,. [Limited to a] “one handgun arsenal”, the Glock 17 won. Shooting +P 9mm which vastly outperforms standard 9mm loads safe for antique firearms also allows me compatibility with military ammo stockpiles [Israeli Uzi SMG ammo] if imports here are stopped. BTW, I suggest that everyone at a minimum (and in addition to your regular bench reloader) have a “Lee …




Two Letters Re: Which Rifle and Caliber is the Best for TEOTWAWKI?

G’day from Down Under. In you post on the TEOTWAWKI rifles, you mentioned .303s. While the rifles are plentiful, robust and inexpensive, the ammo is becoming very hard to find and expensive. Example, Winchester 303 SP is $ 48 AUD per box of 20 here. Good ex-military ball is about $80 to $100 per 100 (if you can find it) and will be at least 30 years old. The Ishapore Mk.2s are a much better bet, cost about the same, and take 7.62 [mm NATO]. Or perhaps, one of the ex-Israeli [K98] Mausers [chambered] in .308? However, I personally feel …




Letter Re: .45 ACP Stopping Power and the M1911

Mr. Rawles, First, I must say that greatly appreciate your website and the expertise that you share. I am 21, and am trying to lead getting my family and close friends prepared logistically for whatever may be coming down in the future. Your information and suggestions are a time/money saver (and likely eventually a life saver.) “Patriots” is an invaluable resource, and more can always be gleaned every time it is read. Thank you! I wanted to comment on the 45 ACP post from Dec. 20. I generally shy away from handgun discussions because handguns are a mediocre weapon, and …