Category: Field Gear

Pat’s Product Review: Stove Tec Rocket Stoves From US Tactical Supply

Some months ago, I alerted Survival Blog readers to a small company, in my neck of the woods, called US Tactical Supply that has customer service second to none, as well as having top-notch products, most made in the good ol’ USA. As I stated before, if you are looking for cheap knock-off merchandise, or just “cheap” anything – then don’t do business with US Tactical Supply – they don’t carry junk – simple as that. However, if you are looking for the best-of-the-best in high-quality products, with friendly folks, who are sincerely happy to help you, and appreciate your …


Cycling Into TEOTWAWKI, by MineT

Cycling has many facets that could attract people preparing for the time when the comforts we have been so accustom to are no longer available. Pick your scenario for the drastic change in our future and a bicycle might be able to handle some of the chores that a computer controlled fossil fuel vehicle may no longer be capable of. If the family car is incapacitated, how will you get from point A to point B? But one can’t expect to just shell out some money on a human powered urban assault vehicle, and one day just pick it up …


Letter Re: Deep Concealment Holsters

Dear Field Gear Editor: I respectfully disagree with the use of the  Deep Concealed Carry Holster for most people who carry concealed firearms.  Gun fights happen in seconds and taking the time to rip open a shirt and cross draw may not be fast enough to survive.  However, anyone carrying a concealed  firearm should be well versed  in the concept of situational awareness and be prepared well in advanced that the use of a weapon may be needed.  Another problem with a cross draw in a highly stressful situation is the heightened possibility of muzzle flashing  someone other that the …


Pat’s Product Review: Deep Concealed Carry Holster

Back in the day, when I lived in Chicago, I worked as a Private Investigator for a lot of years. I usually carried either my S&W Model 686 4″ barrel revolver, or my Ruger Security Six 4″ barrel revolver – both .357 Magnum guns, plus a couple spare speed loaders. I found that I could more easily conceal those big revolvers in shoulder holsters instead of belt holsters under my suit jacket. I also packed some kind of .38 Special snubby revolver in an ankle holster as a back-up. Unlike the police, I couldn’t call for back-up if something went …


Preparedness for Dark Times, by John D.

I am a deputy sheriff in Louisiana and patrol primarily on the night shift. A few nights ago my shift was alerted that the main city in our parish was under a complete “black out”, meaning a total loss of ALL electricity. The reason for the blackout was unknown but the repercussions were great. The power stayed out for a mere hour and a half, but that was all it took to cause  chaos all throughout the city. In this hour and a half multiple shootings occurred, multiple wrecks occurred on the highways and city streets, and multiple stores and …


Bugging Out About Bugs, by A.D.

After a few camping trips where I learned the hard way about preparing for local wildlife I started thinking about the bugs in my bug out plan and I’m not talking about technical flaws.  Previously I had focused much of my attention on what kind of gear to pack, how to provide food and water, and various routes to travel.  A trip to the Rockies, part of the AT and a few southeastern US adventures later I realized that people weren’t the only hostile forces I might encounter and I didn’t have much prepared to deal with the critters I …


Letter Re: A Source for Camouflage Material

Mr. Rawles, While searching around the Internet for camouflage, I came across this web site for Milsim (Airsoft) gamers that has a lot of fairly inexpensive new clothing and tactical items and is searchable by camo pattern.  They have an inexpensive version of Multicam I’m looking at, as well as a number of items in your oft-mentioned British DPM pattern.  I haven’t ordered from them yet, so can’t speak to their service or quality.   Thanks, – Brian  in Colorado


Letter Re: Low-Cost Knives for Long-Term Survival

Mr. Rawles, I am writing with regards to M.B.’s piece. I have had the 12″ Ontario machete (economy version) with the the “D” handle for the past two years. I would completely agree that this is an uncomfortable handle which can be difficult to obtain a proper grip on. However, I solved this problem cheaply with a little bit if DIY, by folding some tough tissue paper and wrapping it around the handle two or three times. I then wrapped the handle and tissue in electric insulation tape, using about two layers of tape. Since doing this, the machete is …


What to Do With It, After It Hits the Fan, by Elizabeth J.

In Arizona a disgruntled city employee, upset with budget cuts made in 2011, manually shut down numerous valves to a large city plant. His goal was to build up enough methane gas to blow up a quarter city block.  Luckily, two hours after shutting off the valves he surrendered with no damage to the plant, and citizens were not affected by the protest.  What if there had been damage to the plant? It is time to think about these things.  After the poo hits the fan, it keeps coming! So now the question is, what are we going to with …


Letter Re: Low-Cost Knives for Long-Term Survival

James, To follow up on M.B.’s article: I use the 12″ Tramontina machete all the time.  Using a hacksaw to make it more pointed, I dropped the point 7/16″ and put a 1 3/4″ long false edge on top with a 1/8″ wide bevel, and this shortened the blade to about 11 3/8.” It was easy to get the top edge perfectly straight with a file. This drop point makes it an effective stabber without weakening the blade.   The cutting edge was sharpened with a double cut bastard file, then a single cut smooth file to put a 1/8″ bevel …


Low-Cost Knives for Long-Term Survival, by M.B.

The purchase of good-quality knives for long-term use can be a huge challenge for preppers. Buying a knife is a lot like hiring a lawyer: when you ask how much a good one will cost, the answer you get is often, “How much would you like to spend?” A good knife for general usage often starts at $80 to $100, and prices can quickly escalate into the hundreds of dollars. Knife aficionados on the online forums often speak of spending several hundred dollars for the “perfect” survival/tactical/combat knife from a famous custom maker. To collectors and to some users, this …


Preparing a Covert Gearbag or Warbag, by Racker

This site is known for material geared towards protection and preparation for some ultimate tests of social interaction. While we may be working to prepare ourselves for a high end threat, keep in mind that there are levels between normal and end situations; we may not go from normal to end in one quick swoop.  We must be prepare for various levels and react accordingly when we or our families are threatened. Knowledge and our equipment are tools to better prepare us to deal with any serious social situation. After writing a previous article on Weapon Use, Slings, Web Gear, …


Pat’s Product Review: Buck Knives CSAR-T Folder

I know a little something about being a first responder to an accident scene. In another life, I was a paramedic, and later in life, I was a police officer. So, I’ve been to more than my share of accidents, and one thing that was usually needed in many traffic accidents, was a good sharp knife, that could cut a person out of their seat belt, or cut some of their clothes off for urgent medical care. So, I appreciate a good sharp knife, more so than most folks do.   Buck Knives (www.buckknives.com) has been around since 1902. No …


Letter Re: Cold Steel Bushman Knives

Mr. Rawles, I feel compelled to comment on Pat’s latest review for the Cold Steel “Bushman” line of knives. I have been a Cold Steel fan for years and like Pat, am completely sold on their products, and I have owned/own a lot of their line. I have owned approximately 15 Bushman knives over the years, some I gave away to friends and family and some I still own…and some I’ve broke. Yes, it broke. Towards the end of Pat’s review, he talks about attaching the hollow handle of the Bushman to a good wood shaft.  I wanted to try …


Pat’s Product Review: Cold Steel Bushman Series Knives

1

I have received many requests to test and evaluate the Cold Steel “Bushman” line of knives that Cold Steel is producing. I’ve been a big fan of Cold Steel products since the very beginning – I’m sold on their products. However, for some strange reason, I never requested anything from the Bushman series of knives.   My friend, Lynn Thompson, who owns and operates Cold Steel, isn’t afraid to back up his products, and does so, in a series of videos on his company web site. On the web site, you will see all manner of Cold Steel products being …