Dear James,
I’ve mentioned to you before that I’m a affiliate instructor with another major firearms training school. The comments made [by correspondent PPPP] about pistol malfunctions are 100% in line with what we see on our firing lines, as well.
We advise our students to run away screaming from any weapon that has ‘target’, ‘match’, ‘custom’, or ‘accurized’ stamped on the side of them. It was [Mikhail] Kalashnikov [the designer of the incredibly robust AK-47] who pointed out to us all that when you have something with moving parts, the parts need room to move! Most custom shop and high dollar pistols are temperamental beasts that react very poorly to heat and dirt. We see the $1,200+ [Model] 1911 choke and seize up all the time once the guns get hot. Most people buy guns and they never shoot them, in fact, last time I heard a statistic regarding firearms usage in the United States, the national average of rounds fired per gun was seven – and that is over the entire lifetime of the owner! Manufacturers sell guns that they bet will never see hard use, and usually they win that bet. And the tight, ‘accurate’ 1911s lead that pack. This is why it is imperative that every reader of your blog get out to the range and run their guns for real!
Yes, professional schools are expensive and the cost of ammunition is getting ridiculous, but at risk of sounding like a cheap slogan, how much is your life worth? Going out for two or three days of intense training will put your weapons and accessories through the use and abuse you will need to truly decide what works and what needs a second look, as well as teaching you a host of valuable skills.
Standing in a booth at the local indoor range, picking your gun up off of a table, and firing when you choose to at a static piece of paper, is at best an exercise in marksmanship. You haven’t been training for real until things start breaking. We announce at the beginning of every class, that it is our sincerest hope, that everything our students brought with them – every gun, every holster, every magazine – breaks! If it sucks, we want to find that out now, not when innocent life is on the line. We run the gear and the students hard because that is the only way to truly test things, and it’s the best way to build the confidence of the operator. [JWR Adds: And it is in grungy conditions that’s the best place to learn to do stoppage clearance drills. If you can clear a Type 2 stoppage when your gun is filthy, when your arms are tired, and when you are under stress, then odds are that you can later do the same in combat. Fine motor skills are sharply degraded when you are under stress. Train like you will fight, repetitively!]
Things that I would add to the list of bad ideas:
1.) 8-round magazines for the 1911. I’ve seen few that finish two days of training without blowing apart. Usually the floor plate dislodges from the base of the magazine, leaving the student standing there with a pistol gummed up with loose rounds, a follower and a spring clogging the ejection port, and a magazine body that they can’t get out of the well. [JWR Adds: The only brands of 8-round M1911 magazine that I have fond that good strength and longevity are original Colt brand, and MetalForm brand. And coincidentally, Colt now buys all of their .45 ACP M1911 magazines from MetalForm, under contract. (These are manufactured for Colt by MetalForm, using Colt “rampant stallion” stamped floorplates, and sold in Colt packages.)
2.) Recoil buffers – get these out of your life! Get them out of your pistols and get them out of your rifles! They never fail to disintegrate under heavy use, rendering the weapon useless until disassembled and cleaned out.
3.) Extended this, and enlarged that. Don’t modify guns with oversized slide stops or extended mag release buttons, mercury guide rods or rubber grip sleeves, etc… There’s one bit of wisdom that I learned the hard way years ago: There is nothing you can buy, bolt, glue or screw to a gun that will align your sights and press your trigger for you. You cannot spend money on things to make you shoot better, regardless of what our modern American mindset tells us. Marksmanship comes from proper technique and proper practice, and good old fashioned work. Obviously there are some issues like sharp edges and [S&W] J-frame [size] grips that are too small for a shooter’s hands, but serious equipment issues are hardly what the majority of add-ons sold in the Brownell’s catalog are aimed at. Save your money and spend it on training!
Lastly, I agree with every recommendation the writer mentioned. ‘De-horning’, or removing the sharpe edges off of carry guns, is highly recommended and something I have done to all of my concealment guns! And de-cocking the SIG [pistol]s before re-holster is mandatory on our range – as a matter of fact, we teach that the pistol be de-cocked every time the trigger finger breaks contact with the trigger and returns to register. This way, the trigger is reset to the position that the trigger finger is used to finding it every time it enters the trigger guard. That applies to all of the de-cocker equipped pistols – [such as] H&K USPs, Beretta 92s, Walther PPKs, et cetera.
The instructor who wrote the letter that you posted is obviously one of the good ones, and anyone within range of him would be well served by attending his course! – Bill from Ohio