E-Mail 'Using a Slow Pump in a Well, by Tunnel Rabbit' To A Friend

2 Comments

1. Thanks, Just what I wanted. Homer

   1. Ideally, it is better to use a submersible pump designed for that job, however, it is good to know the options, and to have the ability to adapt. Of course it can be use in shallow and hand dug wells, and those instances with any filtering system available. PVC pipe could easily handle those pressures as well, but it does not handle a freeze, and must be protected. Also, the example applies to pumping longer distances, and to heights the #1308 is capable of, 400 feet. Using larger diameter pipe would help ensure the maximum gpm is delivered, as there is friction. Because the gpm is so low, and the rotor vane type pump will build pressure until it reaches it limit, going up just one size, 3/4″ is likely enough if attempting 400′. And note, do not use a valve on the output line to control the flow. The pump will build pressure until it either bursts the line, or breaks the pump.

      Just got call to go fix the cooling system on a propane fired generator. Hope I have the tools for that. In that vane, I would also make sure to have the tools and spare fittings, extra adapters, and tools to reconfigure, to fix and adapt equipment to changing requirements. Be able to use what ever plumbing might be available, such as garden hose, pvc, poly pipe, 1 inch galvanized well line, and even copper. It can be cobbled together in a pinch. Think like a farmer during the Great Depression.

Comments are closed.