Zero Tolerance 0393 Folder, by Pat Cascio

“Zero Tolerance” is a bold name for any company. This is a knife company is actually a division of famed Kershaw Knives. Today we’re looking at their ZT0393 model folder.

I don’t care who you are, or what you make, when you name your company “Zero Tolerance” the consumers expect nothing less than perfection in your products – all your products. That’s a tough claim to live up to. However, when we’re talking about knives, it is a very bold step to imply that your products are made to perfection, and without flaw.

Many years ago, I used to collect – and design – custom knives. I’m no knife maker. I tried my hand at it, and its tough drawing a straight line with a ruler. However, I can make my thoughts come out on a piece of paper, where a knife company or custom knife maker can bring my ideas to fruition. I sold off all my custom knives many years ago, even the ones I designed and had made for me but several custom knife makers. Of course, I regret letting those knives go, that I designed.

Today, many custom knife makers make use of CNC machines and other equipment to manufacture their knives – just like the big name knife companies do. In the past, custom knife makers did most of their work free-hand on custom knives. And, many of those knives had some small flaws or defects – you had to look closely to spot them, though. Yet, it didn’t distract from the fact that, your knife was one of a kind, if was made by a custom knife maker. One thing that bothered me back in the day, was that, many knife makers simply couldn’t put a halfway decent edge on their knives – how very odd that was. You paid $600 for a custom knife, and when you got it, it had a tough time slicing through a piece of paper. I guess a lot of people simply collected custom knives, and never used them. Not me!

ZT is Part of Kershaw

Kershaw Knives have been around a good many years, it was started right here in my home state of Oregon. I’ve toured their plant several times, and with each new visit, I’m amazed at the growth – not only in size, but in the many knives they manufacture there. A lot of folks don’t realize that, Zero Tolerance knives is a division of Kershaw Knives, and all ZT knives are made right here in the USA. The idea behind ZT knives, is that they are designed for rough use, but professionals like the military and law enforcement – the best knives, for the professionals. I like that idea, a lot.

From the git-go, I was privy to the first knives produced by ZT knives, I happened to be at the Kershaw plant, when I was shown some of the models that ZT was going to come out with. I was sworn to secrecy, and I didn’t let anyone know about this new knife line – it wasn’t too long after my visit, I received several of the prototype ZT knives, and was told I could write about them – but had to return the prototype samples – Grrrr! However, when the knives came out on the market, Kershaw made sure I got samples of my own – whew!

Zero_Tolerance_ZT0393_1

I couldn’t tell you how many ZT knives I’ve received for testing over the years, but its pretty safe to say that I’ve probably written about almost every model they’ve produced. Of course, with a name and title like “Zero Tolerance” I examined every knife under a magnifying glass – literally – and you know what I’ve found – on every single ZT sample that came into my hands? Zero Tolerance! No imperfections at all, and quite honestly, the ZT knives exceeded what I was paying top dollar for, when I was collecting custom made knives! How does ZT do it?

When ZT knives are being made, they are inspected at several steps along the assembly process – under magnifying lights. It is amazing to watch the workers at the Kershaw plant work hand-in-hand, assembling these knives. I’ve seen some of the workers set aside a knife that came into their hands, and asked “why?” Well, they spotted a small imperfection or flaw in the knife that just came from the worker next to them – and for the life of me, I couldn’t spot the flaw, even under magnification. I’ve looked through a bin of “rejects” and couldn’t spot what the problem was.

The ZT 0393 Folder

All of the above leads us to the ZT 0393 folder, that was designed by custom knife maker Rick Hinderer. To be sure, Kershaw/ZT uses the talents of many custom knife makers, in the design of their knives, and some are even designed in-house, too. The 0393 has elements from his custom folders, the Maximus and Eklipes and the 0393 features his famous harpoon style blade that he calls a “spanto” blade, that is made out of CPM 20CV. CPM 20CV is one of the newest super stainless steels used by knife makers, and it provides some serious hardness, and corrosion resistance, and it has excellent edge retention. During all of my testing over several weeks, I never once had to touch-up the edge – it came hair-popping sharp out of the box, and stayed that way. The 03093 opens via a flipper on the blade, and the KVT ball-bearings make for a butter-smooth, and effortless way of opening the blade. Nice!

Zero Tolerance ZT0393_4

The handle of the 0393 is made out of Titanium, and the handle scales are blue anodized with a machined G10 overlay. It is very classy looking. The frame lock is made out of Titanium, with a hardened steel lockbar insert for add strength. There is also a reversible pocket clip, so the knife an be carried in either front pocket. The blade is 3.5-inches long, but it actually looks longer than that…I like a folder with a blade that is between 3.5 and 4 inches in length. Length closed is 4.75-inches and opened it is 8.25-inches, and weighs in at 5-oz, so its no heavy weight in your pocket.

The G10 overlay is machined with a Rick Hinderer custom texture – it just flat out feels great in the hand. It is hard to explain this texturing, but you will have to experience, to fully appreciate it.

Time for Testing

During my testing, the knife rode in the right front pocket of my cargo pants, and I never noticed it was there – it rode at just the right height. The 0393 was easy to draw, and open, thanks to that flipper and the KVT ball-bearings – super, super smooth opening and closing. The blade locked solid when opened, no worries about it closing on my hand when in use.

I always take my knife samples to the gun shop I haunt, the guys there love a good knife, and they all commented on how sweet looking this folder was, and how effortlessly it was to open with the flipper – and fast to open. They also commented on the “strange” looking blade shape, but they all liked it as well.

My testing over several weeks consisted of the ever-famous, slicing through thick blackberry vines – no challenge at all for this folder. Cutting open the never ending stream of cardboard boxes delivered from UPS, FedEx and USPS was no chore at all – and some of those boxes are thick – really thick. I also stabbed the blade into thick stacked cardboard, and the knife went up to the handle – the design of the blade was really something and aided in the deep penetration. Cutting rope – all kinds of rope, no problem at all. One test I do every now and then, is to soak some hemp rope in water – wet rope is tough to slice through. But it was no problem for the Hinderer design.

Zero_Tolerance_ZT0393_2

Zero Tolerance knives don’t come cheap. However, you are getting custom-quality in these knives, and in many cases, the quality is even better than you’d get from some custom knife makers – I kid you not. The ZT line is designed for professional use. If you are serious about survival on the mean streets, or just want to add a superior folder to your collection, then check out the 0393 – it retails for $300 and is worth every penny of that.  I recently spotted them for under $182 on Amazon. I think you’ll really like the look and feel of this folder in your hands.




17 Comments

  1. I have a 0350 and OVERBUILT is not a bad description of it. It was designed not to fail – no matter what task is thrown it. I would expect nothing less from Zero Tolerance.

  2. Go to big-5 and everyday they have folders on sale for $9.99. Bet if you had one you couldn’t tell the difference except you would have an extra $170 in your pocket.

    1. You can swing a $9.99 hammer from Walmart and call yourself a carpenter, but there’s a reason the professional owns an Estwing.

      Cheap knives (let’s say under $30) may break, rust, fall apart due to shoddy materials or workmanship, have difficulty holding an edge, be unwieldy or uncomfortable to grip, have locks that fail causing injury, or otherwise leave you up sh*t creek without a blade when you really need one. If it has a clip, the screws may loosen or pull out. Cheap knives often have thin blades and use lots of plastic. Many are also be a knock offs or look-alikes that borrow heavily from someone else’s original design.

      A more expensive blade should be made with better materials, both in the steel and in the scale. It probably won’t use much plastic, at least not where it counts. It will take harder use and some abuse without breaking, failing, or falling apart. It should hold an edge well, have a full tang (if a fixed blade) and be ergonomically designed for comfortable carry and use. As prices rise above $200, the toughness should increase, the steel should improve, and you should have more options in blade style and finish.

      Find your personal sweet spot of cost and performance, but please don’t expect your $10 to give you the performance of a $50 or $150 blade.

        1. I own a Morakniv; I think its in my kid’s bug out bag if that gives you an idea of how I feel about it. I know they are considered great bushcraft knives, but I’d rather have a TOPS if I am going into the wilds with only one blade. I don’t own a Glock knife, but it looks like a good cost effective option — but it’s not a $10 knife.

    2. I’ll take that bet, Anon, just let me know the stakes. If you proclaim that I can’t tell the difference between a $9.99 knife and one that cost $179.95, I’m here to call your bluff. Put your money on the line and let’s have a contest. Some folks are satisfied with junk from China, others appreciate quality. I’m among the latter.

      1. I am 100% sure that in your mind you are correct. Nothing will change your mind. It is zero problem if you are rich. Some of us aren’t and we want value for our money not a name. Be my guest and buy the $179 knife.

  3. Very nice looking knife, and great review. Thank you!

    It is obviously a top quality tool. But like those above, I struggle to pay $180 for a pocket knife when I’m so hard on them.

  4. Hi Cool looking knife – kinda hard to justify when one can loose several working at different emergency/accident sites as a medic and you might respond to several in one day or night. . 10 or 20 dollars not bad but 200 + and leave at accident scene when time is critical – someone gets a good blade or someone might die if I have to look for my blade after using it to cut straps or seat. I live in very rural area and transport time is critical since choppers might not be available.. I’ve probably lost over 50+ blades since working sites etc.. amazon

    1. If your knives / tools are getting lost in accident sites, you my friend need a lanyard on your knife or tool. I keep several tools with a permanent lanyard and carabiner attachment for belt or belt loop. If you are an EMT, I suggest a look at the Leatherman Raptor.

      Not an EMT, but such an equipped tool is perfect for fishing in case of a dropped tool means a splash and a head slap :^). Or fence work – clip the biner to the fence itself and the tool is handy when making repairs. Just remember to retrieve it and you are good to go !

  5. I remember when a marine kabar was 19.95. I’ve always wanted one, but l’d say, “what for”.. Now I collect knives of all types. Balisongs, bowies, stilettos, kukris.The only thing I hold in importance is price. They should be cheap,and once you’re done with it, go get another one.

  6. Thanks for bringing this knife to our attention, Pat. The blade shape is quite interesting. I appreciate ZT’s attempts to make their knives tough, functional, and also eye-pleasing. I like the size of the 0393 too. It’s not too big for EDC.

    I appreciate that you review all sorts of blades for us. And I appreciate that you press on when you get so much guff from those that reply. If it’s a top quality US made knife, they scoff at you for reviewing a knife that they can’t or won’t afford to buy. If it’s a good but less expensive knife made in China, they berate you for being “un-‘merican.” Seems you can’t please everyone. But I think you already know that. Thanks for what you do for us!

  7. I have 2 of their models. Last one was 3” blade first
    One 4”. Nice product

    All knife manufacturers should make more 3” models to be legal in more states

    Affects me when traveling in Midwest. At home in Texas no problem on blade lengths

    I Wonder how many consumers even know legal length limits in their states?

  8. I purchased this knife because of this article. While I do enjoy it thus far, it was too much to pay and it isn’t flawless as I hoped. The lines don’t match up on one side and thus the point of the knife is not what it should be. I expected perfection from the article and the price I paid. I actually work a couple miles away from their office and attempted to exchange it for a blade without errors. Sadly, the nice corporate receptionist declined my request. I should have stuck with the aforementioned wisdom…don’t spend more than $20 on a pocket knife.

  9. While running out and dropping hundreds of dollars on the latest and greatest “super-steel” folder may be somewhat silly, carrying around a $10 flea market special and convincing yourself it’s “just as good” is even dumber. It’s not, there’s a reason it’s $10 and you’ll find out what the reason is as soon as you really NEED that knife. Buy quality once and you’re set, buy junk and you’ll be buying junk over and over.

    And buying a cheapo knife because you’re afraid you’ll lose it is like buying a crappy car because you’re afraid it’ll be stolen. Ever hear of pocket clips and lanyards?

    All you need to do in order to find a quality knife that won’t break the budget is to find “last season’s” super-steel. Nowadays CM154 and VG-10 are old news and you can get excellent knives that retailed for three figures a few years ago for a fraction of that price.

Comments are closed.